Напоминаю. В самом первом сообщении этой темы я приводил вывод CLI
Код:
Traffic Control Trap : [Both]
По идее я долджен получить что-то типа:
SNMPv2-MIB::snmpTrapOID.0 PKT-STORM-CTRL-MIB::swPktStormNotify
PKT-STORM-CTRL-MIB::swPktStormCtrlPortIndex 10
PKT-STORM-CTRL-MIB::swPktStormNotifyPrefix swPktStormOccurred
Вот третьего значения я как раз и не получаю.
Вот интересующие меня трапы, которые я почему-то не получаю.
Взяты из PKT-STORM-CTRL-MIB версии 2.03
Код:
-- -----------------------------------------------------------------------------
swPktStormNotifyPrefix OBJECT IDENTIFIER ::= { swPktStormNotify 0 }
swPktStormOccurred NOTIFICATION-TYPE
OBJECTS { swPktStormCtrlPortIndex
}
STATUS current
DESCRIPTION
"This trap is sent when a packet storm is detected by a packet storm mechanism and a shutdown action is taken. "
::= { swPktStormNotifyPrefix 1 }
swPktStormCleared NOTIFICATION-TYPE
OBJECTS { swPktStormCtrlPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when the packet storm is cleared by the packet storm mechanism."
::= { swPktStormNotifyPrefix 2 }
swPktStormDisablePort NOTIFICATION-TYPE
OBJECTS { swPktStormCtrlPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when the port is disabled by the packet storm mechanism."
::= { swPktStormNotifyPrefix 3 }