DXS-3326GSR:4#show firmware information
Command: show firmware information

 Box ID Version   Size(B) Update Time         From               User

 --- -- --------- ------- ------------------- ------------------ ---------------

 1   *1 4.41-B11  4077193     0 days 00:00:00 Serial Port(Prom)  Unknown

 1    2 (empty)

'*' means boot up firmware
(R) means firmware update thru Serial Port(RS232)
(T) means firmware update thru TELNET
(S) means firmware update thru SNMP
(W) means firmware update thru WEB
(SIM) means firmware update thru Single IP Management

Command: show traffic control


Traffic Control

                                  Broadcast  Multicast  Destination
Module  Group [ports]  Threshold  Storm      Storm      Lookup Fail
------  -------------  ---------  ---------  ---------  -----------
1       1              128        Disabled   Disabled   Disabled
1       2              128        Disabled   Disabled   Disabled
1       3              128        Disabled   Disabled   Disabled
1       4              128        Disabled   Disabled   Disabled
1       5              128        Disabled   Disabled   Disabled
1       6              128        Disabled   Disabled   Disabled
1       7              128        Disabled   Disabled   Disabled
1       8              128        Disabled   Disabled   Disabled
1       9              128        Disabled   Disabled   Disabled
1       10             128        Disabled   Disabled   Disabled
1       11             128        Disabled   Disabled   Disabled
1       12             128        Disabled   Disabled   Disabled
1       13             128        Disabled   Disabled   Disabled
1       14             128        Disabled   Disabled   Disabled
1       15             128        Disabled   Disabled   Disabled
1       16             128        Disabled   Disabled   Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All

 

#-------------------------------------------------------------------------------

#                    DXS-3326GSR Stackable Ethernet Switch

#                                Configuration

#

#                           Firmware: Build 4.41-B11

#              Copyright(C) 2004-2007 D-Link  All rights reserved.

#-------------------------------------------------------------------------------

 


# STACK


##  stacking config information

##   #Box                   Prio-

##   #ID    Type      Exist rity 

##   #--- ----------- ----- -----

##   #  1 DXS-3326GSR exist 16

##   #  2 USR-NOT-CFG no   

##   #  3 USR-NOT-CFG no   

##   #  4 USR-NOT-CFG no   

##   #  5 USR-NOT-CFG no   

##   #  6 USR-NOT-CFG no   

##   #  7 USR-NOT-CFG no   

##   #  8 USR-NOT-CFG no   

##   #  9 USR-NOT-CFG no   

##   # 10 USR-NOT-CFG no   

##   # 11 USR-NOT-CFG no   

##   # 12 USR-NOT-CFG no   


# BASIC


config serial_port baud_rate 115200 auto_logout 15_minutes
enable telnet 23
enable web 80
enable clipaging

# STORM

config traffic control 1:1-1:26 broadcast disable multicast disable dlf disable threshold 128


# GM

config sim candidate
disable sim
config sim dp_interval 30
config sim hold_time 100

# SYSLOG

disable syslog
config system_severity log information
config system_severity trap information

# QOS


config scheduling_mechanism strict
config scheduling 0 max_packet 1
config scheduling 1 max_packet 2
config scheduling 2 max_packet 3
config scheduling 3 max_packet 4
config scheduling 4 max_packet 5
config scheduling 5 max_packet 6
config scheduling 6 max_packet 7
config 802.1p user_priority 0  2
config 802.1p user_priority 1  0
config 802.1p user_priority 2  1
config 802.1p user_priority 3  3
config 802.1p user_priority 4  4
config 802.1p user_priority 5  5
config 802.1p user_priority 6  6
config 802.1p user_priority 7  6
enable hol_prevention
config 802.1p default_priority 1:1-1:26 0
config bandwidth_control 1:1-1:26 rx_rate no_limit tx_rate no_limit


# MIRROR

config mirror port X
disable mirror

# TRAF-SEGMENTATION
config traffic_segmentation 1:1-1:26 forward_list all

# PORT
disable jumbo_frame

config ports 1:1-1:26 speed auto flow_control disable learning enable state enable

# PORT_LOCK
config port_security ports 1:1-1:26 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset

# 8021X

disable 802.1x
config 802.1x auth_mode port_based
config 802.1x auth_protocol radius_eap
config 802.1x capability ports 1:1-1:26 none
config 802.1x auth_parameter ports 1:1-1:26 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable


# SNMPv3

delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all
config snmp engineID 800000ab030015e98fbb00
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included
create snmp group public v1 read_view CommunityView notify_view CommunityView
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3  noauth_nopriv read_view restricted notify_view restricted
create snmp group private v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp community private view CommunityView read_write
create snmp community public view CommunityView read_only
create snmp user initial initial

# MANAGEMENT

enable snmp traps

enable snmp authenticate_traps

disable rmon


# VLAN


config vlan default delete 1:1-1:26

config vlan default advertisement enable

create vlan 195 tag 195 type 1q_vlan

config vlan 195 add tagged 1:1-1:22,1:24

config vlan 195 add untagged 1:23 advertisement disable

create vlan management tag 249 type 1q_vlan

config vlan management add tagged 1:1,1:21-1:24 advertisement disable

create vlan 251 tag 251 type 1q_vlan

config vlan 251 add tagged 1:1-1:25 advertisement disable

disable gvrp

config gvrp 1:1-1:22,1:24-1:26 state disable ingress_checking enable acceptable_frame admit_all pvid 1

config gvrp 1:23 state disable ingress_checking enable acceptable_frame admit_all pvid 195


# FDB


config fdb aging_time 300

config fdb destination_hit disable

config multicast port_filtering_mode 1:1-1:26 forward_unregistered_groups


# MAC_ADDRESS_TABLE_NOTIFICATION


config mac_notification interval 1 historysize 1

disable mac_notification

config mac_notification ports 1:1-1:26 disable


# STP


 config stp version rstp

 config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 3 fbpdu enable hellotime 2

 config stp priority 32768 instance_id 0

 config stp mst_config_id name 00:15:E9:8F:BB:00 revision_level 0

 disable stp

 config stp ports 1:1-1:26 externalCost auto  edge false p2p auto state enable

 config stp mst_ports 1:1-1:26 instance_id 0 internalCost auto priority 128


# ACL


disable cpu_interface_filtering


# SNTP


disable sntp

config time_zone operator + hour 0 min 0

config sntp primary 0.0.0.0 secondary 0.0.0.0 poll-interval 720

config dst disable


# LACP


config link_aggregation algorithm ip_source

config lacp_port 1:1-1:26 mode passive


# IP


config ipif System vlan 251 ipaddress 192.168.251.173/24 state enable


# SNOOP


config igmp_snooping default host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping querier default query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable

config igmp_snooping 195 host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping querier 195 query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable

config igmp_snooping management host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping querier management query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable

config igmp_snooping 251 host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping querier 251 query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable


# ACCESS_AUTHENTICATION_CONTROL


config authen_login default method local

config authen_enable default method  local_enable

config authen application console login default

config authen application console enable default

config authen application telnet login default

config authen application telnet enable default

config authen application ssh login default

config authen application ssh enable default

config authen application http login default

config authen application http enable default

config authen parameter response_timeout 30

config authen parameter attempt 3

disable authen_policy


# ROUTE


config route preference static 60

config route preference rip 100

config route preference ospfIntra 80

config route preference ospfInter 90

config route preference ospfExt1 110

config route preference ospfExt2 115

create iproute default 192.168.251.1 1


# ARP


config arp_aging time 20


# IGMP


config igmp ipif System version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable

config igmp ipif System last_member_query_interval 1 


# PIMSM


disable pim

config pim cbsr hash_masklen 30

config pim cbsr bootstrap_period 60

config pim register_probe_time 5

config pim register_suppression_time 60

config pim last_hop_spt_threshold 0

config pim rp_spt_threshold 0

config pim crp holdtime 150 priority 192

config pim crp wildcard_prefix_cnt 0

config pim ipif System state disable hello 30 jp_interval 60 mode dm dr_priority 1

config pim cbsr ipif System priority -1


# DVMRP


disable dvmrp

config dvmrp ipif System metric 1 probe 10 neighbor_timeout 35 state disable


# RIP


disable rip

config rip timer update_interval 30

config rip timer timeout_interval 180

config rip timer garbage_collect_interval 120

config rip ipif System tx_mode disable state disable

config rip ipif System rx_mode disable state disable


# MD5



# OSPF


config ospf ipif System area 0.0.0.0 priority 1 hello_interval 10 dead_interval 40

config ospf ipif System authentication none metric 1 state disable

config ospf router_id 0.0.0.0

disable ospf


# DNSR


disable dnsr

config dnsr primary nameserver 0.0.0.0

config dnsr secondary nameserver 0.0.0.0

disable dnsr cache

disable dnsr static


# BOOTP


disable bootp_relay

config bootp_relay hops 4 time 0


# VRRP


config vrrp ipif System authtype none

disable vrrp


disable vrrp ping



# SSL


disable ssl

enable ssl ciphersuite RSA_with_RC4_128_MD5

enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA

enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA

enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5

config ssl cachetimeout 600


# SSH


 config ssh algorithm 3DES enable

 config ssh algorithm AES128 enable

 config ssh algorithm AES192 enable

 config ssh algorithm AES256 enable

 config ssh algorithm arcfour enable

 config ssh algorithm blowfish enable

 config ssh algorithm cast128 enable

 config ssh algorithm twofish128 enable

 config ssh algorithm twofish192 enable

 config ssh algorithm twofish256 enable

 config ssh algorithm MD5 enable

 config ssh algorithm SHA1 enable

 config ssh algorithm RSA enable

 config ssh algorithm DSA enable

 config ssh authmode password enable

 config ssh authmode publickey enable

 config ssh authmode hostbased enable

 config ssh server maxsession 3

 config ssh server contimeout 120

 config ssh server authfail 2

 config ssh server rekey never

 config ssh user root authmode password

 disable ssh


#-------------------------------------------------------------------

#             End of configuration file for DXS-3326GSR

#-------------------------------------------------------------------