faq обучение настройка
Текущее время: Вс июн 22, 2025 17:04

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 63 ]  На страницу Пред.  1, 2, 3, 4, 5  След.
Автор Сообщение
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Пн сен 08, 2014 16:04 
Не в сети

Зарегистрирован: Сб окт 06, 2012 18:21
Сообщений: 42
вы для мнг используете влан 1 ?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Вт сен 09, 2014 05:03 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
zhenyatsk писал(а):
вы для мнг используете влан 1 ?


Ну да, так исторически выросло.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Вт сен 09, 2014 10:36 
Не в сети

Зарегистрирован: Пт окт 24, 2003 00:47
Сообщений: 508
Откуда: Moscow
Так вы покажите настройки обоих коммутаторов.

_________________
D-Link User: DGS-3120-24, DGS-3324SR, DGS-3627G, DGS-3612G, DGS-3312SR, DGS-3100-24TG, DGS-3200-10, DES-3200-26, DES-3200-28, DES-3200-18, DES-3528, DES-3526, DES-3028, DES-1228, DES-2108, DES-2110, DES-3326SR, DMC-920, DMC-810.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Ср сен 10, 2014 07:37 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Ivantey писал(а):
Так вы покажите настройки обоих коммутаторов.


Ок, вот второй конфиг:
Скрытый текст: показать
#-------------------------------------------------------------------
# DES-3028 Configuration
#
# Firmware: Build 2.94.B05
# Copyright(C) 2008 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------


# BASIC

config serial_port baud_rate 9600 auto_logout 10_minutes
# ACCOUNT LIST

# ACCOUNT END

# PASSWORD ENCRYPTION
disable password encryption
config terminal_line default
disable clipaging
disable command logging
enable password_recovery

# STORM

config traffic trap none
config traffic control 1-28 broadcast disable multicast disable unicast disable action drop threshold 64 countdown 0 time_interval 5

# LOOP_DETECT

disable loopdetect
config loopdetect recover_timer 60
config loopdetect interval 10
config loopdetect trap none
config loopdetect port 1-4,6,8-24 state enabled
config loopdetect port 5,7,25-28 state disabled

# QOS

config scheduling_mechanism strict
config scheduling 0 weight 1
config scheduling 1 weight 2
config scheduling 2 weight 4
config scheduling 3 weight 8
config 802.1p user_priority 0 1
config 802.1p user_priority 1 0
config 802.1p user_priority 2 0
config 802.1p user_priority 3 1
config 802.1p user_priority 4 2
config 802.1p user_priority 5 2
config 802.1p user_priority 6 3
config 802.1p user_priority 7 3
config cos tos value 0 class 0
config cos tos value 1 class 0
config cos tos value 2 class 0
config cos tos value 3 class 0
config cos tos value 4 class 0
config cos tos value 5 class 0
config cos tos value 6 class 0
config cos tos value 7 class 0
config dscp_mapping dscp_value 0 class 0
config dscp_mapping dscp_value 1 class 0
config dscp_mapping dscp_value 2 class 0
config dscp_mapping dscp_value 3 class 0
config dscp_mapping dscp_value 4 class 0
config dscp_mapping dscp_value 5 class 0
config dscp_mapping dscp_value 6 class 0
config dscp_mapping dscp_value 7 class 0
config dscp_mapping dscp_value 8 class 0
config dscp_mapping dscp_value 9 class 0
config dscp_mapping dscp_value 10 class 0
config dscp_mapping dscp_value 11 class 0
config dscp_mapping dscp_value 12 class 0
config dscp_mapping dscp_value 13 class 0
config dscp_mapping dscp_value 14 class 0
config dscp_mapping dscp_value 15 class 0
config dscp_mapping dscp_value 16 class 0
config dscp_mapping dscp_value 17 class 0
config dscp_mapping dscp_value 18 class 0
config dscp_mapping dscp_value 19 class 0
config dscp_mapping dscp_value 20 class 0
config dscp_mapping dscp_value 21 class 0
config dscp_mapping dscp_value 22 class 0
config dscp_mapping dscp_value 23 class 0
config dscp_mapping dscp_value 24 class 0
config dscp_mapping dscp_value 25 class 0
config dscp_mapping dscp_value 26 class 0
config dscp_mapping dscp_value 27 class 0
config dscp_mapping dscp_value 28 class 0
config dscp_mapping dscp_value 29 class 0
config dscp_mapping dscp_value 30 class 0
config dscp_mapping dscp_value 31 class 0
config dscp_mapping dscp_value 32 class 0
config dscp_mapping dscp_value 33 class 0
config dscp_mapping dscp_value 34 class 0
config dscp_mapping dscp_value 35 class 0
config dscp_mapping dscp_value 36 class 0
config dscp_mapping dscp_value 37 class 0
config dscp_mapping dscp_value 38 class 0
config dscp_mapping dscp_value 39 class 0
config dscp_mapping dscp_value 40 class 0
config dscp_mapping dscp_value 41 class 0
config dscp_mapping dscp_value 42 class 0
config dscp_mapping dscp_value 43 class 0
config dscp_mapping dscp_value 44 class 0
config dscp_mapping dscp_value 45 class 0
config dscp_mapping dscp_value 46 class 0
config dscp_mapping dscp_value 47 class 0
config dscp_mapping dscp_value 48 class 0
config dscp_mapping dscp_value 49 class 0
config dscp_mapping dscp_value 50 class 0
config dscp_mapping dscp_value 51 class 0
config dscp_mapping dscp_value 52 class 0
config dscp_mapping dscp_value 53 class 0
config dscp_mapping dscp_value 54 class 0
config dscp_mapping dscp_value 55 class 0
config dscp_mapping dscp_value 56 class 0
config dscp_mapping dscp_value 57 class 0
config dscp_mapping dscp_value 58 class 0
config dscp_mapping dscp_value 59 class 0
config dscp_mapping dscp_value 60 class 0
config dscp_mapping dscp_value 61 class 0
config dscp_mapping dscp_value 62 class 0
config dscp_mapping dscp_value 63 class 0
config 802.1p default_priority 1-28 0
config cos mapping port 1-28 ethernet 802.1p

# MIRROR

disable mirror
config mirror port 1 delete source ports 1 both

# BANDWIDTH

config bandwidth_control 1-28 rx_rate no_limit tx_rate no_limit

# SYSLOG

enable syslog
create syslog host 1 severity all facility local6 udp_port 514 ipaddress 192.168.253.4 state enable
config log_save_timing on_demand

# TRAF-SEGMENTATION

config traffic_segmentation 1-28 forward_list 1-28

# PACKET_FROM_CPU

config mgmt_pkt_priority default

# SSL

disable ssl
enable ssl ciphersuite RSA_with_RC4_128_MD5
enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
config ssl cachetimeout 600

# PORT

config ports 1-28 speed auto flow_control disable state enable clear_description
config ports 1-28 learning enable
config ports 1-28 mdix auto
config ports 25-26 medium_type fiber speed auto flow_control disable state enable clear_description
config ports 25-26 medium_type fiber learning enable

# OAM


# DDM

config ddm trap disable
config ddm log enable
config ddm ports 25-26 state enable shutdown none

# TIME_RANGE


# GM

config sim candidate
disable sim
config sim dp_interval 30
config sim hold_time 100

# MANAGEMENT

enable snmp traps
enable snmp authenticate traps
enable snmp linkchange_traps
config snmp linkchange_traps ports all enable
config snmp coldstart_traps enable
config snmp warmstart_traps enable
config snmp system_name s142-1-1
config snmp system_location Gercena 63
disable rmon

# SNMPv3

delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all
delete snmp group public
delete snmp group private
delete snmp group ReadGroup
delete snmp group WriteGroup
config snmp engineID 800000ab030022b0571b12
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3 noauth_nopriv read_view restricted notify_view restricted
create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group s142-1-1 v1 read_view CommunityView notify_view CommunityView
create snmp group s142-1-1 v2c read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView
create snmp group s142-1-1w v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group s142-1-1w v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group montomcomro v1 read_view CommunityView notify_view CommunityView
create snmp group montomcomro v2c read_view CommunityView notify_view CommunityView
create snmp community montomcomro view CommunityView read_only
create snmp community s142-1-1 view CommunityView read_only
create snmp community s142-1-1w view CommunityView read_write
create snmp user initial initial
create snmp host 192.168.252.2 v1 s142-1-1

# DEBUG_HANDLER

debug config error_reboot enable

# VLAN

disable asymmetric_vlan
disable qinq
config vlan default delete 1-4,9-20,22-24
config vlan default advertisement enable
create vlan east tag 16
config vlan east add tagged 5-8,21,25-28
config vlan east add untagged 1-4,9-20,22-24
create vlan rtc_ger72_luding tag 554
config vlan rtc_ger72_luding add tagged 7,25
create vlan dns_lan tag 948
config vlan dns_lan add tagged 21,25-28
create vlan allegro tag 953
config vlan allegro add tagged 6,25
create vlan rayff tag 992
config vlan rayff add tagged 6,25-28
disable gvrp
config gvrp 1-4,9-20,22-24 state disable ingress_checking enable acceptable_frame admit_all pvid 16
config gvrp 5-8,21,25-28 state disable ingress_checking enable acceptable_frame admit_all pvid 1

# 8021X

disable 802.1x
config 802.1x auth_protocol radius_eap
config radius parameter timeout 5 retransmit 2
config 802.1x capability ports 1-28 none
config 802.1x auth_parameter ports 1-28 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable

# PORT_LOCK

disable port_security trap_log
config port_security ports 1-28 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnTimeout

# PPPOE

config pppoe circuit_id_insertion state disable
config pppoe circuit_id_insertion ports 1-28 state enable circuit_id ip

# DhcpSS

config filter dhcp_server ports 1-28 state disable
config filter dhcp_server trap_log disable
config filter dhcp_server illegal_server_log_suppress_duration 5min

# MAC_ADDRESS_TABLE_NOTIFICATION

config mac_notification interval 1 historysize 1
disable mac_notification
config mac_notification ports 1-28 disable

# STP

enable stp
config stp version rstp
config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 6 fbpdu enable hellotime 2 lbd enable lbd_recover_timer 60
config stp priority 32768 instance_id 0
config stp mst_config_id name 00:22:B0:57:1B:12 revision_level 0
config stp trap new_root enable topo_change enable
config stp ports 1-4,9-20,22-24 externalCost auto edge true p2p auto state enable lbd disable
config stp mst_ports 1-28 instance_id 0 internalCost auto priority 128
config stp ports 1-4,9-20,22-24 fbpdu disable
config stp ports 1-4,9-20,22-24 restricted_role true
config stp ports 1-4,9-20,22-24 restricted_tcn true
config stp ports 5-8,21,25-28 externalCost auto edge false p2p auto state enable lbd disable
config stp ports 5-8,21,25-28 fbpdu enable
config stp ports 5-8,21,25-28 restricted_role false
config stp ports 5-8,21,25-28 restricted_tcn false

# MULTI FILTER

config control_pkt ipv4 igmp replace priority none dscp none
config control_pkt ipv4 vrrp replace priority none dscp none
config control_pkt ipv4 rip replace priority none dscp none
config control_pkt ipv4 pim replace priority none dscp none
config control_pkt ipv4 dvmrp replace priority none dscp none
config control_pkt ipv4 ospf replace priority none dscp none
config control_pkt ipv6 mld replace priority none dscp none
config control_pkt ipv6 nd replace priority none dscp none
config max_mcast_group port 1-28 max_group 256

# BPDU_PROTECTION

config bpdu_protection ports 1-28 mode shutdown

# SAFEGUARD_ENGINE

config safeguard_engine state disable utilization rising 30 falling 20 trap_log disable mode fuzzy

# BANNER_PROMP

config command_prompt s142-1-1
config greeting_message default

# SSH

config ssh algorithm 3DES enable
config ssh algorithm AES128 enable
config ssh algorithm AES192 enable
config ssh algorithm AES256 enable
config ssh algorithm arcfour enable
config ssh algorithm blowfish enable
config ssh algorithm cast128 enable
config ssh algorithm twofish128 enable
config ssh algorithm twofish192 enable
config ssh algorithm twofish256 enable
config ssh algorithm MD5 enable
config ssh algorithm SHA1 enable
config ssh algorithm RSA enable
config ssh algorithm DSA enable
config ssh authmode password enable
config ssh authmode publickey enable
config ssh authmode hostbased enable
config ssh server maxsession 8
config ssh server contimeout 120
config ssh server authfail 2
config ssh server rekey never
config ssh user expl authmode password
disable ssh

# SNOOP

enable igmp_snooping
config igmp_snooping data_driven_learning max_learned_entry 56
enable igmp_snooping multicast_vlan
create igmp_snooping multicast_vlan iptv 14
config igmp_snooping multicast_vlan iptv state enable
config igmp_snooping multicast_vlan iptv add member_port 1-4,9-12,14-24
config igmp_snooping multicast_vlan iptv add source_port 5,7,25-28
config igmp_snooping vlan_name default host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name default aged_out disable
config igmp_snooping data_driven_learning vlan_name default state enable
config igmp_snooping querier all query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable
config igmp_snooping vlan_name iptv host_timeout 260 router_timeout 260 leave_timer 2 fast_leave disable
config igmp_snooping data_driven_learning vlan_name iptv aged_out disable
config igmp_snooping data_driven_learning vlan_name iptv state enable
config igmp_snooping vlan_name east host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name east aged_out disable
config igmp_snooping data_driven_learning vlan_name east state enable
config igmp_snooping vlan_name rtc_ger72_luding host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name rtc_ger72_luding aged_out disable
config igmp_snooping data_driven_learning vlan_name rtc_ger72_luding state enable
config igmp_snooping vlan_name dns_lan host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name dns_lan aged_out disable
config igmp_snooping data_driven_learning vlan_name dns_lan state enable
config igmp_snooping vlan_name allegro host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name allegro aged_out disable
config igmp_snooping data_driven_learning vlan_name allegro state enable
config igmp_snooping vlan_name rayff host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable
config igmp_snooping data_driven_learning vlan_name rayff aged_out disable
config igmp_snooping data_driven_learning vlan_name rayff state enable
config igmp access_authentication port 1-28 state disable
config cpu_filter l3_control_pkt 1-28 all state disable

# FDB

config fdb aging_time 300
config multicast port_filtering_mode 1-28 filter_unregistered_groups
disable flood_fdb
config flood_fdb log disable trap disable

# VLAN_TRUNK

disable vlan_trunk

# SMTP

disable smtp

# ACL

create access_profile ip destination_ip 224.0.0.0 profile_id 1
config access_profile profile_id 1 add access_id 1 ip destination_ip 224.0.0.0 port 1-28 permit priority 5
disable cpu_interface_filtering

# SNTP

enable sntp
config time_zone operator + hour 7 min 0
config sntp primary 78.140.0.250 secondary 78.140.0.1 poll-interval 720
config dst disable

# DOS_PREVENTION

disable dos_prevention trap_log
config dos_prevention dos_type land_attack action drop state enable
config dos_prevention dos_type blat_attack action drop state enable
config dos_prevention dos_type smurf_attack action drop state enable
config dos_prevention dos_type tcp_null_scan action drop state enable
config dos_prevention dos_type tcp_xmascan action drop state enable
config dos_prevention dos_type tcp_synfin action drop state enable
config dos_prevention dos_type tcp_syn_srcport_less_1024 action drop state disable

# LACP

config lacp_port 1-28 mode passive
config link_aggregation algorithm mac_source

# ERPS

config erps log disable
disable erps

# ADDRBIND

disable address_binding dhcp_snoop
create address_binding ip_mac ipaddr 78.140.8.46 mac_address 1C-AF-F7-7F-3B-9B ports 15
create address_binding ip_mac ipaddr 78.140.8.63 mac_address 00-E0-4C-11-2D-AA ports 10
create address_binding ip_mac ipaddr 78.140.8.64 mac_address 00-C0-DF-08-03-0D ports 1
create address_binding ip_mac ipaddr 78.140.8.65 mac_address 00-30-84-76-DA-83 ports 3
create address_binding ip_mac ipaddr 78.140.8.67 mac_address 00-1B-11-8A-F2-C3 ports 4
create address_binding ip_mac ipaddr 78.140.8.78 mac_address E0-CB-4E-BF-56-16 ports 9
create address_binding ip_mac ipaddr 78.140.8.97 mac_address 00-0E-0C-3E-5E-62 ports 16
create address_binding ip_mac ipaddr 78.140.8.145 mac_address AC-F2-C5-23-B5-B2 ports 12
create address_binding ip_mac ipaddr 78.140.8.153 mac_address 54-04-A6-BF-A6-67 ports 23
create address_binding ip_mac ipaddr 78.140.8.155 mac_address B8-A3-86-6B-CC-EA ports 22
create address_binding ip_mac ipaddr 78.140.8.157 mac_address 00-24-1D-15-F4-A0 ports 18
create address_binding ip_mac ipaddr 78.140.8.167 mac_address 00-0C-6E-DC-12-DD ports 14
create address_binding ip_mac ipaddr 78.140.8.171 mac_address C4-A8-1D-5C-A0-DA ports 17
create address_binding ip_mac ipaddr 78.140.8.195 mac_address 00-1F-CE-6A-FB-A4 ports 2
create address_binding ip_mac ipaddr 78.140.8.213 mac_address 00-02-F1-52-50-B2 ports 13
create address_binding ip_mac ipaddr 78.140.8.245 mac_address 20-AA-4B-57-79-90 ports 9
disable address_binding trap_log
config address_binding ip_mac ports 1,3-4,9-10,12-18,22-23 state enable loose allow_zeroip disable forward_dhcppkt disable
config address_binding ip_mac ports 1-28 mode arp stop_learning_threshold 500
config address_binding dhcp_snoop max_entry ports 1-28 limit 5
config address_binding ip_mac ports 2,5-8,11,19-21,24-28 state disable allow_zeroip disable forward_dhcppkt enable

# ARPSPOOF


# IP

config ipif System vlan default ipaddress 192.168.252.111/24 state enable
config ipif System dhcp_option12 state disable
enable telnet 23
enable web 80
disable autoconfig

# LLDP

enable lldp
config lldp message_tx_interval 30
config lldp tx_delay 2
config lldp message_tx_hold_multiplier 4
config lldp reinit_delay 2
config lldp notification_interval 5
config lldp ports 1-28 notification disable
config lldp ports 1-4,9-20,22-24 admin_status disable
config lldp ports 5-8,21,25-28 admin_status tx_and_rx
config lldp ports 5-8,21,25-28 basic_tlvs port_description system_name system_description system_capabilities enable

# MLDSNP

disable mld_snooping

# ARP

config arp_aging time 20
config gratuitous_arp send ipif_status_up enable
config gratuitous_arp send dup_ip_detected enable
config gratuitous_arp learning enable

# AAA

config authen_login default method local
config authen_enable default method local_enable
config authen application console login default
config authen application console enable default
config authen application telnet login default
config authen application telnet enable default
config authen application ssh login default
config authen application ssh enable default
config authen application http login default
config authen application http enable default
config authen parameter response_timeout 30
config authen parameter attempt 3
disable authen_policy
config admin local_enable




# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace
config dhcp_relay option_82 remote_id default
config dhcp_relay ports 1-28 state enable

# DHCP_LOCAL_RELAY

disable dhcp_local_relay
config dhcp_local_relay option_82 remote_id default
config dhcp_local_relay option_82 ports 1-28 policy keep

# FIRM

config configuration trap save disable upload disable download disable

# ROUTE

create iproute default 192.168.252.1 1

#-------------------------------------------------------------------
# End of configuration file for DES-3028
#------------------------------------------------------------------


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Ср сен 10, 2014 08:05 
Не в сети

Зарегистрирован: Вт фев 07, 2012 10:47
Сообщений: 302
Откуда: Красноярск
Вот и ответ
Цитата:
config lldp ports 1-28 notification disable

На магистральных портах сделайте Enable и будет вам счастье!

_________________
Народ и партия - едины!


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Ср сен 10, 2014 11:04 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Kolobokteam писал(а):
Вот и ответ
Цитата:
config lldp ports 1-28 notification disable

На магистральных портах сделайте Enable и будет вам счастье!


Если бы, пробовал я так

Код:
Port ID : 17
---------------------------------------------
    lldpStatsTxPortFramesTotal           : 14295
    lldpStatsRxPortFramesDiscardedTotal  : 14292
    lldpStatsRxPortFramesErrors          : 14292
    lldpStatsRxPortFramesTotal           : 14293
    lldpStatsRxPortTLVsDiscardedTotal    : 0
    lldpStatsRxPortTLVsUnrecognizedTotal : 0
    lldpStatsRxPortAgeoutsTotal          : 0

Command: show lldp ports 17

Port ID                 : 17
-----------------------------------------------------------------
Admin Status            : TX_and_RX
Notification Status     : Enable
Advertised TLVs Option  :
    Port Description                                      Enable
    System Name                                           Enable
    System Description                                    Enable
    System Capabilities                                   Enable


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Ср сен 10, 2014 12:27 
Не в сети

Зарегистрирован: Пт окт 24, 2003 00:47
Сообщений: 508
Откуда: Moscow
на 3028 notification тоже отключен и отсутствует влан портах на которых идет обмен.

_________________
D-Link User: DGS-3120-24, DGS-3324SR, DGS-3627G, DGS-3612G, DGS-3312SR, DGS-3100-24TG, DGS-3200-10, DES-3200-26, DES-3200-28, DES-3200-18, DES-3528, DES-3526, DES-3028, DES-1228, DES-2108, DES-2110, DES-3326SR, DMC-920, DMC-810.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Чт сен 11, 2014 05:51 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Ivantey писал(а):
на 3028 notification тоже отключен и отсутствует влан портах на которых идет обмен.


Влан присутствует, он 1(единичка). Notification включал и привел ответы в предыдущем сообщении.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Ср сен 24, 2014 05:15 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Подниму тему.
Провел анализ на сетке: таких DES-3200-18 + DES-3028 восемьдесят четыре штуки.
Прошивки не последние, но и не старые:
Код:
1    DLink    DES-3028       2.93.B04     58
2    DLink    DES-3200-18    1.84.B006    24
3    DLink    DES-3200-18    1.84.B010    2


Настройки LLDP умолчательные:
Код:
LLDP Configurations
    LLDP Status               : Enable
    LLDP Forward Status       : Disable
    Message Tx Interval       : 30
    Message Tx Hold Multiplier: 4
    ReInit Delay              : 2
    Tx Delay                  : 2
    Notification Interval     : 5


На порту включаю
config lldp ports <> admin_status tx_and_rx
config lldp ports <> basic_tlvs all enable


Дефолтный влан есть на портах, PVID на портах его.

Часть вот так отдает статистику:
Код:
Command: show lldp statistics

Last Change Time       : 278
Number of Table Insert : 0
Number of Table Delete : 0
Number of Table Drop   : 0
Number of Table Ageout : 0


Часть так:
Код:
Command: show lldp statistics

Last Change Time       : 9343945
Number of Table Insert : 1
Number of Table Delete : 1
Number of Table Drop   : 0
Number of Table Ageout : 1


Вот такой вопрос: Из последней статистики видно, что был один сосед, и удален по времени, правильно понимаю? Какой параметр отвечает за время жизни в этой таблице?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Чт сен 25, 2014 10:56 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Вот чем отличаются пакеты:
Код:
TLV Type: End of LLDPDU
TLV Lenght: 6


порты менял, это вся железка так засылает информацию о себе.

Один 3028 засылает такой пакет, второй 3028 его не распознает. Прошивки на обеих одинаковые --- 2.94.B05

upd
2.94.B06 --- проблема на месте

upd2
DES-3200-18 (2.21.B010) тоже считает такие пакеты некорректными
Код:
Port ID : 17
---------------------------------------------
    lldpStatsTxPortFramesTotal           : 57644
    lldpStatsRxPortFramesDiscardedTotal  : 57642
    lldpStatsRxPortFramesErrors          : 57642
    lldpStatsRxPortFramesTotal           : 57644
    lldpStatsRxPortTLVsDiscardedTotal    : 0
    lldpStatsRxPortTLVsUnrecognizedTotal : 0
    lldpStatsRxPortAgeoutsTotal          : 0


что-то вроде моей проблемы: http://www.vimcom.ru/support/index.php?showtopic=929


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Чт сен 25, 2014 16:57 
Не в сети

Зарегистрирован: Пт дек 19, 2008 14:23
Сообщений: 366
Подтверждаю проблему
DES-3200-18 hw A1 и hw b1 не видит соседей DES-3010, DES-3526, DES-3200 hw C1, DGS-3120. DGS-3100, DGS-3627, DGS-3610


Последний раз редактировалось Dmitry Luhtionov Пт сен 26, 2014 09:46, всего редактировалось 1 раз.

Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Пт сен 26, 2014 04:55 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Специалисты D'Link, отзовитесь.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Сб сен 27, 2014 16:24 
Не в сети

Зарегистрирован: Вт фев 07, 2012 10:47
Сообщений: 302
Откуда: Красноярск
Dmitry Luhtionov писал(а):
Подтверждаю проблему
DES-3200-18 hw A1 и hw b1 не видит соседей DES-3010, DES-3526, DES-3200 hw C1, DGS-3120. DGS-3100, DGS-3627, DGS-3610

Да ну нафиг!!! Всё он видит. Во всяком случае DES-3010, DES-3526, DES-3200 hw C1, DGS-3120. DGS-3100, DGS-3627 точно видит.

_________________
Народ и партия - едины!


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Сб сен 27, 2014 17:39 
Не в сети

Зарегистрирован: Пт окт 24, 2003 00:47
Сообщений: 508
Откуда: Moscow
Только что проверил связку 3028 3200-18. Замечательно видят друг друга.

_________________
D-Link User: DGS-3120-24, DGS-3324SR, DGS-3627G, DGS-3612G, DGS-3312SR, DGS-3100-24TG, DGS-3200-10, DES-3200-26, DES-3200-28, DES-3200-18, DES-3528, DES-3526, DES-3028, DES-1228, DES-2108, DES-2110, DES-3326SR, DMC-920, DMC-810.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200-18, не видит соседей по LLDP
СообщениеДобавлено: Пн сен 29, 2014 05:32 
Не в сети

Зарегистрирован: Пн мар 03, 2014 16:25
Сообщений: 190
Откуда: Томск
Ivantey писал(а):
Только что проверил связку 3028 3200-18. Замечательно видят друг друга.


У меня тоже таких много. И есть немаленькое количество тех, которые считают LLDP пакеты от 3028 некорректными (предположительно).
Это из того, что выдает show lldp statistic <ports> и из дампа между этими коммутаторами.


Вернуться наверх
 Профиль  
 
Показать сообщения за:  Сортировать по:  
Начать новую тему Ответить на тему  [ Сообщений: 63 ]  На страницу Пред.  1, 2, 3, 4, 5  След.

Часовой пояс: UTC + 3 часа


Кто сейчас на форуме

Сейчас этот форум просматривают: Google [Bot] и гости: 38


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB