Немного разобрался с первоначальной настройкой.
Настроил менеджмент vlan и доступ к нему, создал клиентский vlan и добавил в него несколько портов. Подключил к LCT.
Подключаю модем, ставлю в бридж и на компьютере получение dhcp - адрес не получает, прописываю статически все равно не идет.
На модеме ставлю IPoA, назначаю ip модему и включаю на нем NAT - тоже не идет.
Куда копать
настройка eth-1
Interface            : eth-1
Type                 : Uplink           UseDhcp      : False
IP Address           : 192.168.1.1     Mask         : 255.255.255.0
Pkt Type             : ALL 
Orl(mbps)            : 300
Configured Duplex    : full             Duplex       : Full
Configured Speed     : auto
Profile Name         : SPPROFILE
Mgmt VLAN Index      : 11
Mgmt S-VLAN Index    : -
Mgmt T-VLAN Index    : 0
Tagged Mgmt PDU Prio : 0
trfclassprofileid    : 2
Ctl Pkts Instance Id : 0                Ctl Pkts Group Id :none
M2VMacDbId           : none
Speed                : 100BT
Oper Status          : Up               Admin Status : Up
настройка vlan
VLAN Name                       : Default-Vlan
VLAN Index                      : 1
Egress ports                    : None  
Forbidden Egress Ports          : None  
Untagged Ports                  : None  
Bridging Mode                   : Restricted
Flood support Status            : enable
Broadcast support Status        : enable
Reserved Mac Profile Id         : 1
Igmp Snoop Action               : Learn
Igmpsnoop ProxyReporting Status : Disable
Igmpsnoop ingress Priority      : none
Directed ARP status             : Enable
DARPFailedHandling              : FloodTrustedPorts
DRA Bcast To Ucast              : Disable
BNG MAC address                 : FF:FF:FF:FF:FF:FF
DRA Status                      : Enable
PIA Status                      : Enable     
Find One Port Fail Act          : TransparentlyForward
VLAN Name                       : Mgmt
VLAN Index                      : 11
Egress ports                    : 385   
Forbidden Egress Ports          : None  
Untagged Ports                  : None  
Bridging Mode                   : Restricted
Flood support Status            : enable
Broadcast support Status        : enable
Reserved Mac Profile Id         : 1
Igmp Snoop Action               : Learn
Igmpsnoop ProxyReporting Status : Disable
Igmpsnoop ingress Priority      : none
Directed ARP status             : Enable
DARPFailedHandling              : FloodTrustedPorts
DRA Bcast To Ucast              : Disable
BNG MAC address                 : FF:FF:FF:FF:FF:FF
DRA Status                      : Enable
PIA Status                      : Enable     
Find One Port Fail Act          : TransparentlyForward
VLAN Name                       : Clients
VLAN Index                      : 111
Egress ports                    : 1     2     3     4     5     385   386   
Forbidden Egress Ports          : 6     7     8     9     10    11    12    13    14    15    16    17    18    19    20    21    22    23    24    
Untagged Ports                  : 1     2     3     4     5     
Bridging Mode                   : Restricted
Flood support Status            : disable
Broadcast support Status        : disable
Reserved Mac Profile Id         : 1
Igmp Snoop Action               : Learn
Igmpsnoop ProxyReporting Status : Disable
Igmpsnoop ingress Priority      : none
Directed ARP status             : Enable
DARPFailedHandling              : FloodTrustedPorts
DRA Bcast To Ucast              : Disable
BNG MAC address                 : FF:FF:FF:FF:FF:FF
DRA Status                      : Enable
PIA Status                      : Enable     
Find One Port Fail Act          : TransparentlyForward