DGS-3610#
System Exception Occured: DSI exception (0x00300)

Special-Purpose & Condition Registers:
+-----------------------+-----------+
|    Register Name      |   Value   |
+-----------------------+-----------+
| Cause Address(SRR0)   | 0028A3D8$ |
| SRR1 Register         | 0000B032$ |
| Machine State(MSR)    | 00001032$ |
| DSISR Register        | 40000000$ |
| Bad Address(DAR)      | 5FFF73CB$ |
| Condition(CR)         | 44004022$ |
| XER Register          | 20000000$ |
| Return Address(LR)    | 0028ABA0$ |
| Count Register(CTR)   | 0028AB38$ |
| SPRG0 Register        | 00000000$ |
| SPRG1 Register        | 00000000$ |
| SPRG2 Register        | 00000000$ |
| SPRG3 Register        | 00000000$ |
+-----------------------+-----------+

General-Purpose Registers (GPRs):
+-----+-----------+-----+-----------+
| No. |   Value   | No. |   Value   |
+-----+-----------+-----+-----------+
| r00 | 004001C0$ | r16 | 00000000$ |
| r01 | 0EBCBD70$ | r17 | 00DF0000$ |
| r02 | 0125AD80$ | r18 | 0EBCBF90$ |
| r03 | 0CB58DE0$ | r19 | 0EBCD054$ |
| r04 | 0028AB38$ | r20 | 0EBCD07C$ |
| r05 | 00000000$ | r21 | 01250000$ |
| r06 | 00400000$ | r22 | 00000002$ |
| r07 | 00000001$ | r23 | 00000001$ |
| r08 | 00000001$ | r24 | 00000001$ |
| r09 | 5FFF73BF$ | r25 | 00000002$ |
| r10 | 0EBCBDE4$ | r26 | 00000000$ |
| r11 | 00000016$ | r27 | 0EBCBEC0$ |
| r12 | 00000000$ | r28 | 0CC1DC00$ |
| r13 | 01256EF0$ | r29 | 0CB78ABE$ |
| r14 | 00000000$ | r30 | 0EC339A0$ |
| r15 | 00000000$ | r31 | 0CB58DE0$ |
+-----+-----------+-----+-----------+

Trace Stack Frame:
0x73612c -> 00000002$ -> 0x584438 -> 0x584810 -> 0x3bdb00 -> 0x3bdc78 -> 0x21bb90 -> 0x21be38 -> 0x21c824 -> 0x4f3da0 -> 0x4e5120<end>


Current Thread Name: Tarptime

System HALT!

Exception address is 00040000$

Write Exception information to Flash! Please don't reset system!

Write Flash OK! Now System Restart......

System bootstrap ...
Nor Flash ID: 0x00C20049, SIZE: 2097152Bytes
Press Ctrl+B to enter Boot Menu ......
Load Ctrl Program ...

Load CTRL with ECC......
Executing program, launch at: 0x00010000
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Load CTRL with ECC......

Self decompressing the image :
################################################################################
################################################################################
################################## [OK]
Ctrl Version: v10.3(5T29), Release(112094)
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Press Ctrl+C to enter Ctrl Menu ......
Main Program File Name firmware.bin, Load Main Program ...

Executing program, launch at: 0x01800000
Installer is initializing ...
Installer Version: 10.3(5T29), Release(112094)
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Prepare installation data ...
Load install package file firmware.bin OK!
Installation is in process ...
ATTENTION: Do not restart your machine before finish !
Upgrading file cust.dat ...
Write file cust.dat to file system.
Upgrade file cust.dat succeed.
Installation process finished successfully ...
ATTENTION: Restart machine operation is permitted now !
System load main program from install package ...
Executing program, launch at: 0x00010000
D-Link
Firmware v10.3(5T29), Release(112094), Compiled Mon Mar 28 13:52:50 CST 2011 by
ngcf61

Copyright (c) 2011 D-Link.
All Rights Reserved.
Decompiling or Reverse Engineering is Not Allowed.

*Sep  5 13:22:17: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
*Sep  5 13:22:38: %DEVICE-5-CHANGED: Device DGS-3610-26G (1) changed state to up
.


DGS-3610>

DGS-3610#sh ver
System description      : DGS-3610-26G Gigabit Ethernet Switch
System start time       : 2011-09-05 9:16:51
System uptime           : 0:2:25:44
System hardware version : A2.0
System software version : v10.3(5T29), Release(112094)
System BOOT version     : 10.3.112094
System CTRL version     : 10.3.112094
Device information:
  Device-1
    Hardware version : A2.0
    Software version : v10.3(5T29), Release(112094)
    BOOT version     : 10.3.112094
    CTRL version     : 10.3.112094

System Exception Occured: DSI exception (0x00300)

Special-Purpose & Condition Registers:
+-----------------------+-----------+
|    Register Name      |   Value   |
+-----------------------+-----------+
| Cause Address(SRR0)   | 0028A3D8$ |
| SRR1 Register         | 0000B032$ |
| Machine State(MSR)    | 00001032$ |
| DSISR Register        | 40000000$ |
| Bad Address(DAR)      | 107EEA5A$ |
| Condition(CR)         | 44004022$ |
| XER Register          | 20000000$ |
| Return Address(LR)    | 0028ABA0$ |
| Count Register(CTR)   | 0028AB38$ |
| SPRG0 Register        | 00000000$ |
| SPRG1 Register        | 00000000$ |
| SPRG2 Register        | 00000000$ |
| SPRG3 Register        | 00000000$ |
+-----------------------+-----------+

General-Purpose Registers (GPRs):
+-----+-----------+-----+-----------+
| No. |   Value   | No. |   Value   |
+-----+-----------+-----+-----------+
| r00 | 004001C0$ | r16 | 01340000$ |
| r01 | 0EBBCBD0$ | r17 | 00D70000$ |
| r02 | 0125AD80$ | r18 | 00D70000$ |
| r03 | 0CA96BA0$ | r19 | 01250000$ |
| r04 | 0028AB38$ | r20 | 00D50000$ |
| r05 | 00000000$ | r21 | 00D50000$ |
| r06 | 00400000$ | r22 | 00000049$ |
| r07 | 00000001$ | r23 | 01340000$ |
| r08 | 00000001$ | r24 | 00000001$ |
| r09 | 107EEA4E$ | r25 | 00000002$ |
| r10 | 0EBBCC44$ | r26 | 00000000$ |
| r11 | 00000016$ | r27 | 0EBBCD20$ |
| r12 | 00000000$ | r28 | 0CC2EC00$ |
| r13 | 01256EF0$ | r29 | 0DEB169E$ |
| r14 | 00FA0000$ | r30 | 0EC529A0$ |
| r15 | 01340000$ | r31 | 0CA96BA0$ |
+-----+-----------+-----+-----------+

Trace Stack Frame:
0x73612c -> 0xd090d0 -> 0x584438 -> 0x584810 -> 0x3bdb00 -> 0x3bdc78 -> 0x21bb90
 -> 0x21be38 -> 0x21bf70 -> 0x22fae4 -> 0x20e398 -> 0x20c5b4 -> 0x20d2ec -> 0x21
094c -> 0x4e5120<end>


Current Thread Name: tnet

System HALT!

Exception address is 00040000$

Write Exception information to Flash! Please don't reset system!

Write Flash OK! Now System Restart......

System bootstrap ...
Nor Flash ID: 0x00C20049, SIZE: 2097152Bytes
Press Ctrl+B to enter Boot Menu ......
Load Ctrl Program ...

Load CTRL with ECC......
Executing program, launch at: 0x00010000
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Load CTRL with ECC......

Self decompressing the image :
################################################################################
################################################################################
################################## [OK]
Ctrl Version: v10.3(5T29), Release(112094)
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Press Ctrl+C to enter Ctrl Menu ......
Main Program File Name firmware.bin, Load Main Program ...

Executing program, launch at: 0x01800000
Installer is initializing ...
Installer Version: 10.3(5T29), Release(112094)
Installer Version: 10.3(5T29), Release(112094)
Prepare installation data ...
Load install package file firmware.bin OK!
Installation is in process ...
ATTENTION: Do not restart your machine before finish !
Upgrading file cust.dat ...
Write file cust.dat to file system.
Upgrade file cust.dat succeed.
Installation process finished successfully ...
ATTENTION: Restart machine operation is permitted now !
System load main program from install package ...
Executing program, launch at: 0x00010000
D-Link
Firmware v10.3(5T29), Release(112094), Compiled Mon Mar 28 13:52:50 CST 2011 by
ngcf61

Copyright (c) 2011 D-Link.
All Rights Reserved.
Decompiling or Reverse Engineering is Not Allowed.

*Sep  6 11:32:06: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 3355443
2) detected
*Sep  6 11:32:27: %DEVICE-5-CHANGED: Device DGS-3610-26G (1) changed state to up
.