faq обучение настройка
Текущее время: Ср авг 06, 2025 21:37

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 8 ] 
Автор Сообщение
 Заголовок сообщения: DGS3627G OSPF непонятки
СообщениеДобавлено: Вс июл 10, 2011 12:44 
Не в сети

Зарегистрирован: Сб июл 02, 2011 10:04
Сообщений: 8
Подскажите куда копать: есть несколько DGS3627G с прошивкой 2.80.B31 - каждая ABR на несколько зон:

Код:
DGS-3627G:admin#sh ospf
Command: show ospf

OSPF Router ID : XX.YYY.0.54
State          : Enabled

It is an area border router (ABR).

OSPF Interface Settings

Interface    IP Address         Area ID         State    Link      Metric
                                                         Status
------------ ------------------ --------------- -------- --------- ---------
1000         XX.YYY.0.54/27     0.0.99.0        Enabled  Link Up   1
124          XX.YYY.0.225/29    0.0.24.0        Enabled  Link Up   1
125          XX.YYY.0.233/29    0.0.25.0        Enabled  Link Up   1
3951         XX.YYY.63.129/30   0.0.99.0        Enabled  Link Up   1
3952         XX.YYY.63.133/30   0.0.99.0        Enabled  Link Up   1
4052         XX.YYY.63.193/30   0.0.99.0        Enabled  Link Up   1
System       192.168.75.136/24  0.0.99.0        Disabled Link Up   1


Total Entries : 7

OSPF Area Settings

Area ID         Type   Stub Import Summary LSA Stub Default Cost Translate
--------------- ------ ----------------------- ----------------- ---------
0.0.0.0         Normal None                    None              None           
0.0.24.0        Normal None                    None              None           
0.0.25.0        Normal None                    None              None           
0.0.99.0        Normal None                    None              None           

Total Entries : 4

Virtual Interface Configuration

Transit         Virtual         Hello    Dead     Authentication Link
Area ID         Neighbor Router Interval Interval                Status
--------------- --------------- -------- -------- -------------- ------

Total Entries : 0

OSPF Area Aggregation Settings

Area ID         Aggregated         LSDB     Advertise
                Network Address    Type
--------------- ------------------ -------- ---------
0.0.24.0        10.174.40.0/24     Summary  Enabled
0.0.24.0        XX.YYY.52.0/22     Summary  Enabled
0.0.24.0        192.168.240.0/21   Summary  Enabled
0.0.25.0        10.174.50.0/24     Summary  Enabled
0.0.25.0        XX.YYY.56.0/22     Summary  Enabled
0.0.25.0        192.168.252.0/22   Summary  Enabled
0.0.99.0        XX.YYY.63.0/24     Summary  Enabled

Total Entries : 7

OSPF Host Route Settings

Host Address    Metric Area ID
--------------- ------ ---------------

Total Entries : 0


В зонах 0.0.24.0 и 0.0.25.0 все нормально, а в зону 0.0.99.0 маршруты в iproute не попадают, хотя в lsdb информация о маршрутах есть на обоих свитчах:
Код:
DGS-3627G:admin#sh ospf lsdb
Command: show ospf lsdb

Area            LSDB      Advertising     Link State         Cost     Sequence
ID              Type      Router ID       ID                          Number
--------------- --------- --------------- ------------------ -------- ----------
0.0.24.0        RTRLink   XX.YYY.0.54     XX.YYY.0.54/0      *        0x80000007
0.0.24.0        RTRLink   XX.YYY.0.226    XX.YYY.0.226/0     *        0x800000C8
0.0.24.0        RTRLink   XX.YYY.0.227    XX.YYY.0.227/0     *        0x800000C9
0.0.24.0        RTRLink   XX.YYY.0.228    XX.YYY.0.228/0     *        0x800000C9
0.0.24.0        RTRLink   XX.YYY.0.229    XX.YYY.0.229/0     *        0x800000C9
0.0.24.0        RTRLink   XX.YYY.0.230    XX.YYY.0.230/0     *        0x800000CA
0.0.24.0        NETLink   XX.YYY.0.227    XX.YYY.0.227/29    *        0x800000CA
0.0.24.0        Summary   XX.YYY.0.54     10.25.0.0/16       16       0x80000005
0.0.24.0        Summary   XX.YYY.0.54     10.174.50.0/24     16       0x80000007
0.0.24.0        Summary   XX.YYY.0.54     10.174.250.0/24    2        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     XX.YYY.0.32/27     1        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     XX.YYY.0.232/29    1        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     XX.YYY.56.0/22     2        0x80000006
0.0.24.0        Summary   XX.YYY.0.54     XX.YYY.60.0/24     2        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     XX.YYY.63.0/24     2        0x80000006
0.0.24.0        Summary   XX.YYY.0.54     192.168.250.0/24   2        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     192.168.251.0/24   2        0x80000005
0.0.24.0        Summary   XX.YYY.0.54     192.168.252.0/22   2        0x80000007
0.0.25.0        RTRLink   XX.YYY.0.54     XX.YYY.0.54/0      *        0x80000007
0.0.25.0        RTRLink   XX.YYY.0.234    XX.YYY.0.234/0     *        0x800000A3
0.0.25.0        RTRLink   XX.YYY.0.235    XX.YYY.0.235/0     *        0x800000A6
0.0.25.0        RTRLink   XX.YYY.0.236    XX.YYY.0.236/0     *        0x800000A5
0.0.25.0        RTRLink   XX.YYY.0.237    XX.YYY.0.237/0     *        0x800000A6
0.0.25.0        NETLink   XX.YYY.0.237    XX.YYY.0.237/29    *        0x8000006A
0.0.25.0        Summary   XX.YYY.0.54     10.24.0.0/16       16       0x80000005
0.0.25.0        Summary   XX.YYY.0.54     10.174.40.0/24     16       0x80000007
0.0.25.0        Summary   XX.YYY.0.54     10.174.46.0/24     2        0x80000005
0.0.25.0        Summary   XX.YYY.0.54     10.174.47.0/24     2        0x80000005
0.0.25.0        Summary   XX.YYY.0.54     XX.YYY.0.32/27     1        0x80000005
0.0.25.0        Summary   XX.YYY.0.54     XX.YYY.0.224/29    1        0x80000005
0.0.25.0        Summary   XX.YYY.0.54     XX.YYY.51.0/24     2        0x80000005
0.0.25.0        Summary   XX.YYY.0.54     XX.YYY.52.0/22     2        0x80000006
0.0.25.0        Summary   XX.YYY.0.54     XX.YYY.63.0/24     2        0x80000006
0.0.25.0        Summary   XX.YYY.0.54     192.168.240.0/21   2        0x80000002
0.0.99.0        RTRLink   XX.YYY.0.50     XX.YYY.0.50/0      *        0x8000006F
0.0.99.0        RTRLink   XX.YYY.0.54     XX.YYY.0.54/0      *        0x80000008
0.0.99.0        NETLink   XX.YYY.0.50     XX.YYY.0.50/27     *        0x80000005
0.0.99.0        Summary   XX.YYY.0.50     10.21.0.0/16       16       0x80000068
0.0.99.0        Summary   XX.YYY.0.50     10.22.0.0/16       16       0x80000068
0.0.99.0        Summary   XX.YYY.0.50     10.23.0.0/16       16       0x80000068
0.0.99.0        Summary   XX.YYY.0.54     10.24.0.0/16       16       0x80000005
0.0.99.0        Summary   XX.YYY.0.54     10.25.0.0/16       16       0x80000005
0.0.99.0        Summary   XX.YYY.0.50     10.174.20.0/24     16       0x8000002D
0.0.99.0        Summary   XX.YYY.0.54     10.174.40.0/24     16       0x80000007
0.0.99.0        Summary   XX.YYY.0.54     10.174.46.0/24     2        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     10.174.47.0/24     2        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     10.174.50.0/24     16       0x80000007
0.0.99.0        Summary   XX.YYY.0.54     10.174.250.0/24    2        0x80000005
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.0.200/29    1        0x80000068
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.0.208/29    1        0x80000068
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.0.216/29    1        0x80000068
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.0.224/29    1        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.0.232/29    1        0x80000005
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.40.0/22     2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.44.0/22     2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.48.0/23     2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.50     XX.YYY.50.0/24     2        0x80000068
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.51.0/24     2        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.52.0/22     2        0x80000006
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.56.0/22     2        0x80000006
0.0.99.0        Summary   XX.YYY.0.54     XX.YYY.60.0/24     2        0x80000005
0.0.99.0        Summary   XX.YYY.0.50     192.168.211.0/24   2        0x80000068
0.0.99.0        Summary   XX.YYY.0.50     192.168.212.0/22   2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.50     192.168.220.0/22   2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.50     192.168.224.0/24   2        0x80000068
0.0.99.0        Summary   XX.YYY.0.50     192.168.231.0/24   2        0x80000068
0.0.99.0        Summary   XX.YYY.0.50     192.168.232.0/23   2        0x8000002D
0.0.99.0        Summary   XX.YYY.0.54     192.168.240.0/21   2        0x80000002
0.0.99.0        Summary   XX.YYY.0.54     192.168.250.0/24   2        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     192.168.251.0/24   2        0x80000005
0.0.99.0        Summary   XX.YYY.0.54     192.168.252.0/22   2        0x80000007

Total Entries: 71

Имеются какие-то непонятные состояния на интерфейсах зон 0.0.24.0 и 0.0.25.0: DRState: OTHER - что это?
Код:
DGS-3627G:admin#sh ospf ipif 124
Command: show ospf ipif 124

Interface Name: 124                     IP Address: XX.YYY.0.225/29 (Link Up)
Network Medium Type: BROADCAST          Metric: 1
Area ID: 0.0.24.0                       Administrative State: Enabled
Priority: 1                             DR State: OTHER
DR Address: XX.YYY.0.227                Backup DR Address: XX.YYY.0.228
Hello Interval: 10                      Dead Interval: 40
Transmit Delay: 1                       Retransmit Time: 5
Authentication: MD5                     MD5 Key ID for Authentication: 1

Passive Mode: Disabled

Total Entries : 1


DGS-3627G:admin#sh ospf ipif 125
Command: show ospf ipif 125

Interface Name: 125                     IP Address: XX.YYY.0.233/29 (Link Up)
Network Medium Type: BROADCAST          Metric: 1
Area ID: 0.0.25.0                       Administrative State: Enabled
Priority: 1                             DR State: OTHER
DR Address: XX.YYY.0.237                Backup DR Address: XX.YYY.0.236
Hello Interval: 10                      Dead Interval: 40
Transmit Delay: 1                       Retransmit Time: 5
Authentication: MD5                     MD5 Key ID for Authentication: 1

Passive Mode: Disabled

Total Entries : 1


DGS-3627G:admin#sh ospf ipif 1000
Command: show ospf ipif 1000

Interface Name: 1000                    IP Address: XX.YYY.0.54/27 (Link Up)
Network Medium Type: BROADCAST          Metric: 1
Area ID: 0.0.99.0                       Administrative State: Enabled
Priority: 1                             DR State: BDR
DR Address: XX.YYY.0.50                 Backup DR Address: XX.YYY.0.54
Hello Interval: 10                      Dead Interval: 40
Transmit Delay: 1                       Retransmit Time: 5
Authentication: MD5                     MD5 Key ID for Authentication: 1

Passive Mode: Disabled

Total Entries : 1

На свитчах были настроены статические маршруты, но после их удаления маршруты OSPF все равно не поднимаются.
Что делать, куда копать?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Пн июл 11, 2011 11:48 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Ср авг 11, 2010 11:29
Сообщений: 416
прошивку обновите...

схему и конфиги и описание простыми словами того, что вы пытаетесь сделать...

Цитата:
Имеются какие-то непонятные состояния на интерфейсах зон 0.0.24.0 и 0.0.25.0: DRState: OTHER - что это?


это одно из штатных состояний устройств участвующих в протоколе ospf, читайте теорию....


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Ср июл 13, 2011 05:21 
Не в сети

Зарегистрирован: Сб июл 02, 2011 10:04
Сообщений: 8
Цитата:
Имеются какие-то непонятные состояния на интерфейсах зон 0.0.24.0 и 0.0.25.0: DRState: OTHER - что это?

это одно из штатных состояний устройств участвующих в протоколе ospf, читайте теорию....

Извините, затупил... :D
Цитата:
прошивку обновите...

Прошивка последняя с FTP сервера DLink-а - если есть свежее вышлите, пожалуйста... :D
Цитата:
схему и конфиги и описание простыми словами того, что вы пытаетесь сделать...

Изображение
Это кусок схемы: верхних по схеме (входящих в зону 0.0.99.0) свитчей 6 штук и соответственно у каждой есть свои нижележащие зоны. Пытаюсь запустить везде OSPF и избавиться от статических маршрутов. Анонсы из зон 0.0.24.0 в зону 0.0.25.0 и наоборот проходят нормально и информация о сетях появляется в таблицах маршрутизации.Проблема в том что анонсы из зон 0.0.24.0 и 0.0.25.0 в зону 0.0.99.0 проходят (информация есть в lsdb), но в таблице маршрутизации маршрутов из сетей 0.0.24.0 и 0.0.25.0 нет (смотрю таблицу и lsdb на соседнем верхнем свитче). Вот конфиг верхнего свитча, на котором сходятся зоны 0.0.24.0, 0.0.25.0 и 0.0.99.0:
Скрытый текст: показать
Код:
#-------------------------------------------------------------------------------
#                      DGS-3627G Gigabit Ethernet Switch
#                                Configuration
#
#                           Firmware: Build 2.80.B31
#           Copyright(C) 2010 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------


# STACK

config stacking force_master_role state disable

# DOUBLE_VLAN

disable double_vlan

# BASIC

# ACCOUNT LIST

# ACCOUNT END


# DEBUG

debug config state disable
debug config error_reboot enable

# STORM

config traffic control auto_recover_time 0
config traffic trap none
config traffic control  1-27 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5

# LOOP_DETECT


# GM

config sim candidate
disable sim
config sim dp_interval 30
config sim hold_time 100

# GM_H


# SYSLOG

disable syslog
config system_severity log information
config system_severity trap information
config log_save_timing on_demand

# QOS

enable hol_prevention
config 802.1p default_priority 1-27 0
config bandwidth_control 1-27 rx_rate no_limit tx_rate no_limit
config per_queue bandwidth_control ports 1-27 0 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 1 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 2 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 3 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 4 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 5 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-27 6 min_rate  no_limit  max_rate no_limit
config scheduling_mechanism ports 1-27 strict
config scheduling ports 1-27 0  max_packet  1
config scheduling ports 1-27 1  max_packet  2
config scheduling ports 1-27 2  max_packet  3
config scheduling ports 1-27 3  max_packet  4
config scheduling ports 1-27 4  max_packet  5
config scheduling ports 1-27 5  max_packet  6
config scheduling ports 1-27 6  max_packet  7
config 802.1p user_priority ports 1-27 0  2
config 802.1p user_priority ports 1-27 1  0
config 802.1p user_priority ports 1-27 2  1
config 802.1p user_priority ports 1-27 3  3
config 802.1p user_priority ports 1-27 4  4
config 802.1p user_priority ports 1-27 5  5
config 802.1p user_priority ports 1-27 6  6
config 802.1p user_priority ports 1-27 7  6

# MIRROR

disable mirror

# TRAF-SEGMENTATION

config traffic_segmentation 1-27 forward_list all

# SSL

disable ssl
enable ssl ciphersuite RSA_with_RC4_128_MD5
enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
config ssl cachetimeout 600

# PORT

disable jumbo_frame
config ports 1-20 speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 21-24 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 21-24 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 25-27 speed auto  flow_control disable learning enable state enable

# OAM


# DDM

config ddm trap disable
config ddm log enable
config ddm ports 1-24 state enable shutdown alarm

# PORT_LOCK

config port_security ports 1-27 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset

# SNMPv3

#  --------------Удалено

# MANAGEMENT

enable snmp traps
enable snmp authenticate_traps
disable snmp
enable snmp linkchange_traps
disable rmon
config snmp linkchange_traps ports 1-27 enable

# VLAN

enable pvid auto_assign
config vlan default delete 1-27
config vlan default advertisement enable
create vlan 124 tag 124
config vlan 124 add tagged 1-3 advertisement disable
create vlan 125 tag 125
config vlan 125 add tagged 4-6 advertisement disable
create vlan 727 tag 727
config vlan 727 add tagged 1-3,21-22 advertisement disable
create vlan 1000 tag 1000
config vlan 1000 add tagged 21-22 advertisement disable
create vlan 2050 tag 2050
config vlan 2050 add tagged 21-22 advertisement disable
create vlan 2704 tag 2704
config vlan 2704 add tagged 1-6,21-22 advertisement disable
create vlan 3951 tag 3951
config vlan 3951 add tagged 1-3 advertisement disable
create vlan 3952 tag 3952
config vlan 3952 add tagged 4-6 advertisement disable
create vlan 4031 tag 4031
config vlan 4031 add tagged 1-3,21-22 advertisement disable
create vlan 4052 tag 4052
config vlan 4052 add tagged 4-6 advertisement disable
create vlan 4081 tag 4081
config vlan 4081 add tagged 1-6,21-22 advertisement disable
create vlan 4089 tag 4089
config vlan 4089 add tagged 1-6,21-22 advertisement disable
create vlan 4090 tag 4090
config vlan 4090 add tagged 1-6,21-22 advertisement disable
disable qinq
disable gvrp
disable vlan_trunk
config gvrp 1-27 state disable ingress_checking enable acceptable_frame admit_all pvid 1

# PROTOCOL_VLAN


# QINQ


# SUBNETVLAN

config vlan_precedence port 1-27 mac_based_vlan

# SUPERVLAN


# RSPAN

disable rspan

# MEF


# 8021X

disable 802.1x
config 802.1x auth_mode port_based
config 802.1x auth_protocol radius_eap
config 802.1x fwd_pdu system disable
config 802.1x max_users 4000
config 802.1x authorization network radius  enable
config 802.1x capability ports 1-27 none
config 802.1x auth_parameter ports 1-27 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x auth_parameter ports 1-27 max_users 16

# guestvlan


# TR


# ACL

disable cpu_interface_filtering

# NLB


# LIMITED_MULTICAST_RANGE


# MULTICAST_VLAN


# FDB

config fdb aging_time 300

# ADDRBIND

config address_binding ip_mac ports 1-27 forward_dhcppkt enable
disable address_binding dhcp_snoop
disable address_binding dhcp_snoop ipv6
disable address_binding nd_snoop
disable address_binding trap_log
config address_binding dhcp_snoop max_entry ports 1-27 limit no_limit

# DHCPV6_SNOOPING


# ND_SNOOPING


# DhcpServerScreening

config filter dhcp_server port all state disable
config filter dhcp_server illegal_server_log_suppress_duration 5min
config filter dhcp_server trap_log disable

# ARPSpoofingPrevention


# MAC_ADDRESS_TABLE_NOTIFICATION

disable mac_notification
config mac_notification interval 1 historysize 1
config mac_notification ports 1-27 disable

# STP

config stp version rstp
config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 6 fbpdu disable hellotime 2 lbd enable lbd_recover_timer 60 nni_bpdu_addr dot1ad
config stp priority 32768 instance_id 0
config stp mst_config_id name 00:1C:F0:1D:0E:C0 revision_level 0
disable stp
config stp ports 1-27 externalCost auto  edge false p2p auto state enable restricted_role false restricted_tcn false lbd disable
config stp mst_ports 1-27 instance_id 0 internalCost auto priority 128
config stp ports 1-27 fbpdu disable

# BPDU_TUNNEL

config bpdu_tunnel ports all type none
disable bpdu_tunnel

# BPDU_PROTECTION

config bpdu_protection ports 1-27 mode shutdown

# SAFEGUARD_ENGINE

config safeguard_engine state disable utilization rising 30 falling 20 trap_log disable mode fuzzy

# BANNER_PROMP

config command_prompt default
config greeting_message default

# SSH

# ----Удалено

# SERVER_PROFILE


# DNSRESOLVER

disable dns_resolver
config name_server timeout 3

# CMDLOG

disable command logging

# BCPING

enable broadcast_ping_reply

# SNTP

disable sntp
config time_zone operator + hour 0 min 0
config sntp primary 0.0.0.0 secondary 0.0.0.0 poll-interval 720
config dst disable

# LACP

config link_aggregation algorithm ip_source
create link_aggregation group_id 1
config link_aggregation group_id 1 master_port 21 ports 21-22 state enable
create link_aggregation group_id 2
config link_aggregation group_id 2 master_port 1 ports 1-3 state enable
create link_aggregation group_id 3
config link_aggregation group_id 3 master_port 4 ports 4-6 state enable
config lacp_port 1-27 mode passive

# IP

config ipif_mac_mapping ipif System mac_offset 0
config ipif System ipaddress 192.168.75.136/24 vlan 2050
config ipif System dhcpv6_client disable
config ipif System  ip_directed_broadcast  disable
config ipif System proxy_arp disable local disable
config ipif_mac_mapping ipif 124 mac_offset 2
create ipif 124 XX.YYY.0.225/29 124 state enable
config ipif 124 proxy_arp disable local disable
config ipif_mac_mapping ipif 125 mac_offset 3
create ipif 125 XX.YYY.0.233/29 125 state enable
config ipif 125 proxy_arp disable local disable
config ipif_mac_mapping ipif 1000 mac_offset 1
create ipif 1000 XX.YYY.0.54/27 1000 state enable
config ipif 1000 proxy_arp disable local disable
config ipif_mac_mapping ipif 3951 mac_offset 5
create ipif 3951 XX.YYY.63.129/30 3951 state enable
config ipif 3951 proxy_arp disable local disable
config ipif_mac_mapping ipif 3952 mac_offset 6
create ipif 3952 XX.YYY.63.133/30 3952 state enable
config ipif 3952 proxy_arp disable local disable
config ipif_mac_mapping ipif 4052 mac_offset 4
create ipif 4052 XX.YYY.63.193/30 4052 state enable
config ipif 4052 proxy_arp disable local disable
config ipif 124 ip_mtu 1500
config ipif 125 ip_mtu 1500
config ipif 1000 ip_mtu 1500
config ipif 3951 ip_mtu 1500
config ipif 3952 ip_mtu 1500
config ipif 4052 ip_mtu 1500
config ipif System ip_mtu 1500
config ipif 124 dhcpv6_client disable
config ipif 125 dhcpv6_client disable
config ipif 1000 dhcpv6_client disable
config ipif 3951 dhcpv6_client disable
config ipif 3952 dhcpv6_client disable
config ipif 4052 dhcpv6_client disable
config ipif System dhcpv6_client disable
config ipif 124  ip_directed_broadcast  disable
config ipif 125  ip_directed_broadcast  disable
config ipif 1000  ip_directed_broadcast  disable
config ipif 3951  ip_directed_broadcast  disable
config ipif 3952  ip_directed_broadcast  disable
config ipif 4052  ip_directed_broadcast  disable
config ipif System  ip_directed_broadcast  disable
disable autoconfig

# ip_tunnel


# ERPS

disable erps
config erps log disable
config erps trap disable

# DHCP_SERVER

config dhcp ping_packets 2
config dhcp ping_timeout 500
disable dhcp_server

# WAC

config wac switch_http_port 80
config wac method local
config wac authorization attributes local enable
config wac authorization attributes radius enable
disable wac
config wac ports 1-27 aging_time 1440 idle_time infinite block_time 60

# JWAC

config jwac switch_http_port 80
config jwac clear_quarantine_server_url
config jwac radius_protocol pap
disable jwac quarantine_server_monitor
config jwac quarantine_server_error_timeout 60
enable jwac forcible_logout
enable jwac udp_filtering
enable jwac redirect
config jwac redirect destination quarantine_server delay_time 1
disable jwac
config jwac authenticate_page english
config jwac authorization attributes radius enable
config jwac authorization attributes local enable
config jwac ports 1-27 auth_mode host_based max_authenticating_host 50 aging_time 1440 idle_time infinite block_time 60

# SFLOW


# LLDP

disable lldp
config lldp message_tx_interval 30
config lldp tx_delay 2
config lldp message_tx_hold_multiplier 4
config lldp reinit_delay 2
config lldp notification_interval 5
config lldp ports 1-27 notification disable
config lldp ports 1-27 admin_status tx_and_rx

# MBA

disable mac_based_access_control
config mac_based_access_control authorization network radius enable local enable
config mac_based_access_control ports 1-27 state disable
config mac_based_access_control ports  1-27 mode host_based
config mac_based_access_control method local
config mac_based_access_control password default
config mac_based_access_control max_users 1024

# MCFILTER


# COMPOUND_AUTHENTICATION

config authentication ports 1-27 auth_mode host_based
config authentication ports 1-27 multi_authen_methods none
enable authorization attributes
config authentication server failover block

# SNOOP

config limited_multicast_addr ports 1-27 state disable

# MLDSNP


# ACCESS_AUTHENTICATION_CONTROL

config authen_login default method local
config authen_enable default method  local_enable
config authen application console login default
config authen application console enable default
config authen application telnet login default
config authen application telnet enable default
config authen application ssh login default
config authen application ssh enable default
config authen application http login default
config authen application http enable default
config authen parameter response_timeout 30
config authen parameter attempt 3
disable authen_policy
config accounting service network state disable
config accounting service shell state disable
config accounting service system state disable

# AAA_LOCAL_ENABLE_PASSWORD

# AAA ADMIN PWD LIST
config admin local_enable



# AAA ADMIN PWD END

# NDP

config ipv6 nd ns ipif System retrans_time 0
config ipv6 nd ra ipif System state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_inter
val 600
config ipv6 nd ns ipif 124 retrans_time 0
config ipv6 nd ra ipif 124 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interval
 600
config ipv6 nd ns ipif 125 retrans_time 0
config ipv6 nd ra ipif 125 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interval
 600
config ipv6 nd ns ipif 1000 retrans_time 0
config ipv6 nd ra ipif 1000 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interva
l 600
config ipv6 nd ns ipif 3951 retrans_time 0
config ipv6 nd ra ipif 3951 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interva
l 600
config ipv6 nd ns ipif 3952 retrans_time 0
config ipv6 nd ra ipif 3952 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interva
l 600
config ipv6 nd ns ipif 4052 retrans_time 0
config ipv6 nd ra ipif 4052 state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interva
l 600

# RIPng

disable ripng
config ripng method split_horizon
config ripng update 30
config ripng expire 180
config ripng garbage_collection 120
config ripng ipif System state disable metric 1
config ripng ipif 124 state disable metric 1
config ripng ipif 125 state disable metric 1
config ripng ipif 1000 state disable metric 1
config ripng ipif 3951 state disable metric 1
config ripng ipif 3952 state disable metric 1
config ripng ipif 4052 state disable metric 1

# ARP

config arp_aging time 20
config gratuitous_arp send ipif_status_up disable
config gratuitous_arp send dup_ip_detected disable
config gratuitous_arp learning disable

# ROUTEFILTER


# ROUTE

config route preference static 60
config route preference default 1
config route preference rip 100
config route preference ospfIntra 80
config route preference ospfInter 90
config route preference ospfExt1 110
config route preference ospfExt2 115
config route preference ebgp 70
config route preference ibgp 130
create iproute default XX.YYY.0.53 1 primary
create iproute 10.172.0.0/255.255.224.0 XX.YYY.0.34 1 primary
create iproute 10.172.32.0/255.255.240.0 XX.YYY.0.34 1 primary
create iproute 10.172.48.0/255.255.248.0 XX.YYY.0.34 1 primary
create iproute 10.172.56.0/255.255.252.0 XX.YYY.0.34 1 primary
create iproute 10.172.60.0/255.255.252.0 XX.YYY.0.38 1 primary
create iproute 10.172.64.0/255.255.224.0 XX.YYY.0.38 1 primary
create iproute 10.172.96.0/255.255.252.0 XX.YYY.0.38 1 primary
create iproute 10.173.0.0/255.255.224.0 XX.YYY.0.42 1 primary
create iproute 10.173.32.0/255.255.240.0 XX.YYY.0.42 1 primary
create iproute 10.173.48.0/255.255.248.0 XX.YYY.0.42 1 primary
create iproute 10.173.56.0/255.255.252.0 XX.YYY.0.42 1 primary
create iproute 10.173.60.0/255.255.252.0 XX.YYY.0.46 1 primary
create iproute 10.173.64.0/255.255.224.0 XX.YYY.0.46 1 primary
create iproute 10.173.96.0/255.255.252.0 XX.YYY.0.46 1 primary
create iproute 10.174.0.0/255.255.224.0 XX.YYY.0.50 1 primary
create iproute 10.174.32.0/255.255.248.0 XX.YYY.0.50 1 primary
create iproute XX.YYY.0.8/255.255.255.248 XX.YYY.0.62 1 primary
create iproute XX.YYY.0.64/255.255.255.224 XX.YYY.0.34 1 primary
create iproute XX.YYY.0.96/255.255.255.248 XX.YYY.0.34 1 primary
create iproute XX.YYY.0.104/255.255.255.248 XX.YYY.0.38 1 primary
create iproute XX.YYY.0.112/255.255.255.240 XX.YYY.0.38 1 primary
create iproute XX.YYY.0.128/255.255.255.224 XX.YYY.0.42 1 primary
create iproute XX.YYY.0.160/255.255.255.248 XX.YYY.0.42 1 primary
create iproute XX.YYY.0.168/255.255.255.248 XX.YYY.0.46 1 primary
create iproute XX.YYY.0.176/255.255.255.240 XX.YYY.0.46 1 primary
create iproute XX.YYY.0.192/255.255.255.248 XX.YYY.0.46 1 primary
create iproute XX.YYY.0.200/255.255.255.248 XX.YYY.0.50 1 primary
create iproute XX.YYY.0.208/255.255.255.240 XX.YYY.0.50 1 primary
create iproute XX.YYY.1.0/255.255.255.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.2.0/255.255.255.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.3.0/255.255.255.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.4.0/255.255.254.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.6.0/255.255.255.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.7.0/255.255.255.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.8.0/255.255.254.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.10.0/255.255.255.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.11.0/255.255.255.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.12.0/255.255.252.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.16.0/255.255.254.0 XX.YYY.0.34 1 primary
create iproute XX.YYY.18.0/255.255.254.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.20.0/255.255.252.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.24.0/255.255.248.0 XX.YYY.0.38 1 primary
create iproute XX.YYY.32.0/255.255.252.0 XX.YYY.0.42 1 primary
create iproute XX.YYY.36.0/255.255.254.0 XX.YYY.0.42 1 primary
create iproute XX.YYY.38.0/255.255.254.0 XX.YYY.0.46 1 primary
create iproute XX.YYY.40.0/255.255.248.0 XX.YYY.0.50 1 primary
create iproute XX.YYY.48.0/255.255.254.0 XX.YYY.0.50 1 primary
create iproute XX.YYY.50.0/255.255.255.0 XX.YYY.0.50 1 primary
create iproute XX.YYY.61.0/255.255.255.128 XX.YYY.0.34 1 primary
create iproute XX.YYY.61.128/255.255.255.252 XX.YYY.0.34 1 primary
create iproute XX.YYY.61.132/255.255.255.252 XX.YYY.0.38 1 primary
create iproute XX.YYY.61.136/255.255.255.248 XX.YYY.0.38 1 primary
create iproute XX.YYY.61.144/255.255.255.240 XX.YYY.0.38 1 primary
create iproute XX.YYY.61.160/255.255.255.224 XX.YYY.0.38 1 primary
create iproute XX.YYY.61.192/255.255.255.192 XX.YYY.0.38 1 primary
create iproute XX.YYY.62.0/255.255.255.128 XX.YYY.0.42 1 primary
create iproute XX.YYY.62.128/255.255.255.248 XX.YYY.0.42 1 primary
create iproute XX.YYY.62.136/255.255.255.252 XX.YYY.0.42 1 primary
create iproute XX.YYY.62.140/255.255.255.252 XX.YYY.0.46 1 primary
create iproute XX.YYY.62.144/255.255.255.240 XX.YYY.0.46 1 primary
create iproute XX.YYY.62.160/255.255.255.224 XX.YYY.0.46 1 primary
create iproute XX.YYY.62.192/255.255.255.192 XX.YYY.0.46 1 primary
create iproute XX.YYY.63.0/255.255.255.128 XX.YYY.0.50 1 primary
create iproute XX.YYY.120.0/255.255.255.248 XX.YYY.0.40 1 primary
create iproute 172.16.1.90/255.255.255.254 XX.YYY.0.38 1 primary
create iproute 172.16.1.92/255.255.255.252 XX.YYY.0.38 1 primary
create iproute 172.16.2.0/255.255.255.224 XX.YYY.0.42 1 primary
create iproute 172.16.2.32/255.255.255.240 XX.YYY.0.42 1 primary
create iproute 172.16.2.48/255.255.255.248 XX.YYY.0.42 1 primary
create iproute 172.16.2.60/255.255.255.252 XX.YYY.0.46 1 primary
create iproute 172.16.2.64/255.255.255.192 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.192.0/255.255.248.0 XX.YYY.0.42 1 primary
create iproute AAA.ZZ.200.0/255.255.255.0 XX.YYY.0.42 1 primary
create iproute AAA.ZZ.201.0/255.255.255.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.202.0/255.255.254.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.204.0/255.255.252.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.208.0/255.255.248.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.216.0/255.255.255.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.218.0/255.255.254.0 XX.YYY.0.42 1 primary
create iproute AAA.ZZ.221.0/255.255.255.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.222.0/255.255.255.0 XX.YYY.0.46 1 primary
create iproute AAA.ZZ.223.0/255.255.255.128 XX.YYY.0.62 1 primary
create iproute 192.168.10.0/255.255.254.0 XX.YYY.0.34 1 primary
create iproute 192.168.12.0/255.255.252.0 XX.YYY.0.34 1 primary
create iproute 192.168.16.0/255.255.240.0 XX.YYY.0.34 1 primary
create iproute 192.168.32.0/255.255.240.0 XX.YYY.0.34 1 primary
create iproute 192.168.48.0/255.255.248.0 XX.YYY.0.34 1 primary
create iproute 192.168.56.0/255.255.252.0 XX.YYY.0.34 1 primary
create iproute 192.168.60.0/255.255.252.0 XX.YYY.0.38 1 primary
create iproute 192.168.64.0/255.255.224.0 XX.YYY.0.38 1 primary
create iproute 192.168.96.0/255.255.252.0 XX.YYY.0.38 1 primary
create iproute 192.168.110.0/255.255.254.0 XX.YYY.0.42 1 primary
create iproute 192.168.112.0/255.255.240.0 XX.YYY.0.42 1 primary
create iproute 192.168.128.0/255.255.224.0 XX.YYY.0.42 1 primary
create iproute 192.168.160.0/255.255.224.0 XX.YYY.0.46 1 primary
create iproute 192.168.192.0/255.255.248.0 XX.YYY.0.46 1 primary
create iproute 192.168.210.0/255.255.254.0 XX.YYY.0.50 1 primary
create iproute 192.168.212.0/255.255.252.0 XX.YYY.0.50 1 primary
create iproute 192.168.216.0/255.255.248.0 XX.YYY.0.50 1 primary
create iproute 192.168.224.0/255.255.240.0 XX.YYY.0.50 1 primary
config ecmp algorithm ip_destination   crc_low
enable ecmp ospf

# PROUTE


# RELAY6

config dhcpv6_relay hop_count  4
disable dhcpv6_relay

# DHCPv6_SERVER

disable dhcpv6_server
config dhcpv6_server ipif 1000 state enable
config dhcpv6_server ipif 124 state enable
config dhcpv6_server ipif 125 state enable
config dhcpv6_server ipif 3951 state enable
config dhcpv6_server ipif 3952 state enable
config dhcpv6_server ipif 4052 state enable
config dhcpv6_server ipif System state enable

# IGMP

config igmp ipif System version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif System last_member_query_interval 1
config igmp check_subscriber_source_network ipif System enable
config igmp ipif 124 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 124 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 124 enable
config igmp ipif 125 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 125 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 125 enable
config igmp ipif 1000 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 1000 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 1000 enable
config igmp ipif 3951 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 3951 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 3951 enable
config igmp ipif 3952 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 3952 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 3952 enable
config igmp ipif 4052 version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif 4052 last_member_query_interval 1
config igmp check_subscriber_source_network ipif 4052 enable

# PIMSM

disable pim
config pim cbsr hash_masklen 30
config pim cbsr bootstrap_period 60
config pim register_suppression_time 60
config pim register_probe_time 5
config pim last_hop_spt_switchover never
config pim crp holdtime 150 priority 192
config pim crp wildcard_prefix_cnt 0
config pim ipif System state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif System priority -1
config pim ipif 124 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 124 priority -1
config pim ipif 125 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 125 priority -1
config pim ipif 1000 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 1000 priority -1
config pim ipif 3951 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 3951 priority -1
config pim ipif 3952 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 3952 priority -1
config pim ipif 4052 state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif 4052 priority -1

# DVMRP

disable dvmrp
config dvmrp ipif System metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 124 metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 125 metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 1000 metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 3951 metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 3952 metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif 4052 metric 1 probe 10 neighbor_timeout 35 state disable

# IPMROUTE


# RIP

disable rip
config rip ipif System tx_mode disable state disable
config rip ipif System rx_mode disable state disable
config rip ipif 124 tx_mode disable state disable
config rip ipif 124 rx_mode disable state disable
config rip ipif 125 tx_mode disable state disable
config rip ipif 125 rx_mode disable state disable
config rip ipif 1000 tx_mode disable state disable
config rip ipif 1000 rx_mode disable state disable
config rip ipif 3951 tx_mode disable state disable
config rip ipif 3951 rx_mode disable state disable
config rip ipif 3952 tx_mode disable state disable
config rip ipif 3952 rx_mode disable state disable
config rip ipif 4052 tx_mode disable state disable
config rip ipif 4052 rx_mode disable state disable

# MD5

create md5 key 1 BBBBBBBB - ключ заменен

# OSPF

create ospf area 0.0.24.0 type normal
create ospf area 0.0.25.0 type normal
create ospf area 0.0.99.0 type normal
config ospf ipif 1000 area 0.0.99.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 1000 authentication md5 1 metric 1 state enable passive disable
config ospf ipif 124 area 0.0.24.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 124 authentication md5 1 metric 1 state enable passive disable
config ospf ipif 125 area 0.0.25.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 125 authentication md5 1 metric 1 state enable passive disable
config ospf ipif 3951 area 0.0.99.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 3951 authentication md5 1 metric 1 state enable passive enable
config ospf ipif 3952 area 0.0.99.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 3952 authentication md5 1 metric 1 state enable passive enable
config ospf ipif 4052 area 0.0.99.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 4052 authentication md5 1 metric 1 state enable passive enable
config ospf ipif System area 0.0.99.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif System authentication md5 1 metric 1 state disable passive enable
create ospf aggregation 0.0.24.0 10.174.40.0/24 lsdb_type summary advertise enable
create ospf aggregation 0.0.24.0 XX.YYY.52.0/22 lsdb_type summary advertise enable
create ospf aggregation 0.0.24.0 192.168.240.0/21 lsdb_type summary advertise enable
create ospf aggregation 0.0.25.0 10.174.50.0/24 lsdb_type summary advertise enable
create ospf aggregation 0.0.25.0 XX.YYY.56.0/22 lsdb_type summary advertise enable
create ospf aggregation 0.0.25.0 192.168.252.0/22 lsdb_type summary advertise enable
create ospf aggregation 0.0.99.0 XX.YYY.63.0/24 lsdb_type summary advertise enable
config ospf router_id XX.YYY.0.54
enable ospf

# BGP


# OSPFv3

config ospfv3 router_id 0.0.0.0
disable ospfv3

# DNSR

disable dnsr
config dnsr primary nameserver 0.0.0.0
config dnsr secondary nameserver 0.0.0.0
disable dnsr cache
disable dnsr static

# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace
config dhcp_relay option_60 state disable
config dhcp_relay option_61 state disable
config dhcp_relay option_60 default mode drop
config dhcp_relay option_61 default drop
disable dhcp_local_relay

# VRRP

config vrrp ipif System authtype none
config vrrp ipif 124 authtype none
config vrrp ipif 125 authtype none
config vrrp ipif 1000 authtype none
config vrrp ipif 3951 authtype none
config vrrp ipif 3952 authtype none
config vrrp ipif 4052 authtype none
disable vrrp

disable vrrp ping


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Вс июл 24, 2011 20:15 
Не в сети

Зарегистрирован: Сб июл 02, 2011 10:04
Сообщений: 8
Прошивку обновил до последней - проблема осталась. Ради эксперимента убрал агрегацию маршрутов - не помогло. Люди!!! помогите пожалуйста - уже не знаю что и делать!!!!


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Пн июл 25, 2011 08:12 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Вт янв 18, 2011 13:29
Сообщений: 8999
Извините, но по всем правилам OSPF на месте Area 99 у вас обязана быть Area 0. Не в этом ли дело?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Пн июл 25, 2011 09:59 
Не в сети

Зарегистрирован: Сб июл 02, 2011 10:04
Сообщений: 8
Ну насколько я знаю, количество расположенных друг за другом областей в OSPF не ограничивается двумя областями, а я нулевую область планировал назначить выше... Но если у железа есть ограничение попробую много железа загнать в нулевую...


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Пн июл 25, 2011 10:14 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Вт янв 18, 2011 13:29
Сообщений: 8999
Каждая область OSPF должна быть связана с нулевой. Либо непосредственно, либо через Virtual link.
Скрытый текст: показать
Рекомендую почитать http://goo.gl/NYG3L - там очень хорошо расписан протокол OSPF.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DGS3627G OSPF непонятки
СообщениеДобавлено: Пн июл 25, 2011 16:34 
Не в сети

Зарегистрирован: Сб июл 02, 2011 10:04
Сообщений: 8
Понял....:) Спасибо :)


Вернуться наверх
 Профиль  
 
Показать сообщения за:  Сортировать по:  
Начать новую тему Ответить на тему  [ Сообщений: 8 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 102


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB