Во-общем решили сделать стек из двух устройств.
На первом(стал мастером) версия прошивки 2.00.47, но втором 2.00.29
Долго второй перегружался.
в итоге в логах первого:
Цитата:
120 01-Jan-2000 01:14:33 %Box-I-STCK-DIFF-SWVER: Unit 2 has different software version from the master. Info
97 01-Jan-2000 01:14:49 %DSYNCH-I-SYNCH_FAILED: Synchronization with unit 2 is failed Info
А второй в консоли выдаёт:
Цитата:
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.04 Built 24-Oct-2007 18:51:36
Network Switch based on 88E6218 with ARM946E-S.
64MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Preparing to decompress...
100%
Decompressing SW from image-1
100%
OK
Running from RAM...
********************************************************************
*** Running SW Ver. 2.00.29 Date 08-Jan-2008 Time 22:37:56 ***
********************************************************************
HW version is 00.01.01
Base Mac address is: 00:1e:58:2d:4c:b9
Dram size is : 64M bytes
Dram first block size is : 45056K bytes
Dram first PTR is : 0x1400000
Flash size is: 16M
01-Jan-2000 01:01:06 %CDB-I-LOADCONFIG: Loading running configuration.
01-Jan-2000 01:01:06 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
CPLD revision: 0.02
Slot 1 - DGS-3100-24TG ST HW Rev. 0.2
------------------------------------
-- Unit Number 2 --
------------------------------------
Running eeprom code for 98DX249 Dev 2. Please wait...
01-Jan-2000 01:01:33 %3SWCOS-F-COSTUNERANGE: SW3P_pcl_common_init: tune param (r
sMaxPolicyRulesEntries)has wrong value 444 , should be between 0 to 426
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 2.00.29 (date 08-Jan-2008 time 22:37:56)
0x144370
0x1419d4
0x4d5de8
0x331f98
0x335920
0x5b4958
0x599ed0
0x588158
0x4dc4cc
0x15ffb4
**************************************************
***************** SYSTEM RESET *****************
**************************************************
как его сбросить кроме веб-интерфейса
и можете выслать прошивку 2.00.47?
Вход
Регистрация
FAQ
Поиск
