config traffic control_trap
Purpose Used to configure the trap settings for the packet storm control
mechanism.
Syntax config traffic control_trap [none | storm_occurred | storm_cleared |
both]
Description This command will configure how packet storm control trap messages
will be used when a packet storm is detected by the Switch. This function
can only be used for the software traffic storm control mechanism (when
the action field in the config traffic storm_control command is set as
shutdown).
Parameters none – No notification will be generated or sent when a packet storm
control is detected by the Switch.
storm _occurred – A notification will be generated and sent when a
packet storm has been detected by the Switch.
storm_cleared - A notification will be generated and sent when a packet
storm has been cleared by the Switch.
both - A notification will be generated and sent when a packet storm has
been detected and cleared by the Switch.
Restrictions User Account Command Level – Administrator and Operator.