Как поднять PPPOE на DVG-5121SP? Подключаю через DSL-2500U который настроен в режиме бриджа. С компьютера соединение отлично поднимается. С шлюза в логах выдает
Код:
Jan 1 00:00:46 daemon.notice Connection terminated.
Jan 1 00:00:46 daemon.notice Modem hangup
Jan 1 00:00:41 daemon.notice Modem hangup
Jan 1 00:00:41 daemon.warn Couldn't increase MRU to 1500
Jan 1 00:00:41 daemon.warn Couldn't increase MTU to 1500
Jan 1 00:00:41 daemon.notice Connect: ppp0 <--> eth0
Jan 1 00:00:41 daemon.info Using interface ppp0
Jan 1 00:00:41 daemon.info PPP session is 51579
Jan 1 00:00:40 daemon.notice Connection terminated.
Jan 1 00:00:40 daemon.warn LCP: timeout sending Config-Requests
Jan 1 00:00:07 daemon.warn Couldn't increase MRU to 1500
Jan 1 00:00:41 daemon.warn Couldn't increase MTU to 1500
Jan 1 00:00:41 daemon.notice Connect: ppp0 <--> eth0
Jan 1 00:00:41 daemon.info Using interface ppp0
Jan 1 00:00:41 daemon.info PPP session is 51579
Jan 1 00:00:40 daemon.notice Connection terminated.
Jan 1 00:00:40 daemon.warn LCP: timeout sending Config-Requests
Jan 1 00:00:07 daemon.warn Couldn't increase MRU to 1500
Jan 1 00:00:07 daemon.warn Couldn't increase MTU to 1500
Jan 1 00:00:07 daemon.notice Connect: ppp0 <--> eth0
Jan 1 00:00:07 daemon.info Using interface ppp0
Jan 1 00:00:07 daemon.info PPP session is 51561
Jan 1 00:00:05 daemon.info Sent PADT
Jan 1 00:00:05 daemon.info POE Send PADT before PADI...session:10441,dst:ef:ef:ef:ef:ef:ef
Jan 1 00:00:05 daemon.notice pppd 2.4.3 started by root, uid 0
Jan 1 00:00:05 daemon.info RP-PPPoE plugin version 3.3 compiled against pppd
Jan 1 00:00:05 daemon.info Plugin rp-pppoe.so loaded.
Jan 1 00:00:00 daemon.info ^MStarting pid 488, console /dev/tts/0: '/sbin/agetty'
Jan 1 00:00:12 user.info UPnP Internet Gateway Device start up!
Jan 1 00:00:07 user.notice klogd started: BusyBox v1.01 (2007.06.07-08:40+0000)
Вход
Регистрация
FAQ
Поиск
