читаю документацию:
Цитата:
Network resources such as printers and servers however, can be shared across VLANs. This is achieved by setting up overlapping VLANs. That is ports can belong to more than one VLAN group. For example, setting VLAN 1 members to ports 1, 2, 3, and 4 and VLAN 2 members to ports 1, 5, 6, and 7. Port 1 belongs to two VLAN groups.
расцениваю описаное выше как "котим сервер/принтер в 2-х виланах? суем порт в 2 вилана untagged и будет вам счастье."
Делаю:
Код:
#create vlan testing type 1q_vlan
Command: create vlan testing type 1q_vlan
Success.
#create vlan testing2 type 1q_vlan
Command: create vlan testing2 type 1q_vlan
Success.
#config vlan testing add untagged 8:7 advertisement disabled
Command: config vlan testing add untagged 8:7 advertisement disabled
Success.
#config vlan testing2 add untagged 8:7 advertisement disabled
Command: config vlan testing2 add untagged 8:7 advertisement disabled
Untagged ports overlapped!
В итоге порт 8:7 принадлежит только testing. В testing2 не добавляется.
Вопрос: Что я понял либо делаю не так?
ЗЫ. Firmware Version Build 3.02-B04
Вход
Регистрация
FAQ
Поиск
