Oct 24 23:29:01> Pool (0x00016960, 0x0001c760)
Oct 24 23:29:01> whal_apiConfig: beaconInterval = 200
Oct 24 23:29:01> WATCH_DOG_TIMER_VAL = 520
Oct 24 23:29:01> wd_beacon_limiter = 1
Oct 24 23:29:01> whal_apiStartBss: Enable Tx, Rx and Start the Bss
Oct 24 23:29:01> ----------------------------------------------------------------
Oct 24 23:29:01> ----------------------------------------------------------------
Oct 24 23:29:01> START BSS, SSID=ALFABANK34, BSSID=00-11-43-96-6A-11
Oct 24 23:29:01> ----------------------------------------------------------------
Oct 24 23:29:01> ----------------------------------------------------------------
Oct 24 23:29:01> AP Power Level = 3
Oct 24 23:29:01> Regulatory Domain = ETSI
Oct 24 23:29:01> Net[0] : Channel=2
Oct 24 23:29:01> ----------------------------------------------------------------
Oct 24 23:29:01> FW Watchdog is Enabled
Oct 24 23:29:59> @@@@@@@@@@@@ RECOVERY: EXTERNAL INTERFERENCE @@@@@@@@@@@@
Oct 24 23:29:59> wdrv_DDA_restart_setEvent ..........
Oct 24 23:29:59> deleting timer 0xc006bc74
Oct 24 23:29:59> deleting timer 0xc006d93c
Oct 24 23:29:59> deleting timer 0xc0072af4
Oct 24 23:29:59> deleting timer 0xc007277c
Oct 24 23:29:59> @@@@@@@@@@@@ TIME SINCE BOOT: 2[d]:7[h]:45[m]:48[s] @@@@@@@@@@@@
Oct 24 23:29:59> Resetting the remote device.
Oct 24 23:29:59> Un-resetting the remote device.
Oct 24 23:29:59> About to re-init the VLYNQ.
Oct 24 23:29:59> Re-initialized the VLYNQ.
Oct 24 23:29:59> Freed MSDUs count = 0
Oct 24 23:29:59> Freed MSDUs count = 32
Oct 24 23:29:59> Resetting the remote device.
Oct 24 23:30:00> Un-resetting the remote device.
Oct 24 23:30:00> About to re-init the VLYNQ.
Oct 24 23:30:00> Re-initialized the VLYNQ.
Oct 24 23:30:00> AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000
Oct 24 23:30:00> whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c
Oct 24 23:30:00> whal_acxProcInitiate: Cpu halt -} download code
Oct 24 23:30:00> whal_acxProcLoadFwImage: 0xa4000000, 0x0
Oct 24 23:30:00> whal_acxProcLoadFwImage() -- Loading FW image2007488: Compiled for RADIA (bg) radio
Oct 24 23:30:00> whal_acxProcLoadFwImage: 1, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3
Oct 24 23:30:00> whal_acxProcLoadFwImage: 2, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3
Oct 24 23:30:00> whal_acxProcLoadFwImage: 3, pBuf=0xc00a4000, len=0x15564, DataLen=0x1555c
Oct 24 23:30:00> whal_acxProcLoadFwImage: 4, pBuf=0xc00a4000, len=0x15564
Oct 24 23:30:00> whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f
Oct 24 23:30:00> whal_acxProcInitiate: run
Oct 24 23:30:00> whal_acxProcWaitInitComplete:
Oct 24 23:30:00> whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88
Oct 24 23:30:00> ----------------------------------------------------------------
Oct 24 23:30:00> ACX Firmaware Version = Rev 1.6.0.24
Oct 24 23:30:00> ----------------------------------------------------------------
Oct 24 23:30:00> whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network
Oct 24 23:30:00> whal_acxProcConfigure: Host Queue is in 0x948B6020
Oct 24 23:30:00> TxQueue[0] NumDesc = 32
Oct 24 23:30:00> TxQueue[0] Priority = 0
Oct 24 23:30:00> TxQueue[1] NumDesc = 32
Oct 24 23:30:00> TxQueue[1] Priority = 129
Oct 24 23:30:00>
Oct 24 23:30:00> whal_acxConfigMemory() --
Oct 24 23:30:00> HostRxDescriptorsAddr = 148b6020
Oct 24 23:30:00> RxQueue NumDesc = 32
Oct 24 23:30:00> RxQueue Priority = 0
Oct 24 23:30:00> RxQueue type = 7
Oct 24 23:30:00> whal_acxProcConfigure: read queue heads
Oct 24 23:30:01> whal_acxConfigRead_QueueHead() -
Oct 24 23:30:01> RxMemBlkQ - 00016960
Oct 24 23:30:01> RxQueueHead - 00013f54
Oct 24 23:30:01> TxMemBlkQ - 0001b360
Oct 24 23:30:01> TxMemBlkQ[0]- 000145d4
Oct 24 23:30:01> TxMemBlkQ[1]- 00014c54
Oct 24 23:30:01> 2007498: whal_acxProcConfigure: configure RxQueue/TxQueue objects
Oct 24 23:30:01> whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa40145d4, NumDesc=32
Oct 24 23:30:01> whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4014c54, NumDesc=32
Oct 24 23:30:01> whal_ParamsPrintMemMap:
Oct 24 23:30:01> Code (0x00000000, 0x0001250c)
Oct 24 23:30:01> Wep (0x00012830, 0x00012940)
Oct 24 23:30:01> Sta (0x00012940, 0x00013f28)
Oct 24 23:30:01> Tmpl (0x00012524, 0x000125dd)
Oct 24 23:30:01> Queue (0x00013f54, 0x000152d4)
Oct 24 23:30:01> Pool (0x00016960, 0x0001c760)
Oct 24 23:30:01> whal_apiConfig: beaconInterval = 200
Oct 24 23:30:01> WATCH_DOG_TIMER_VAL = 520
Oct 24 23:30:01> wd_beacon_limiter = 1
Oct 24 23:30:01> whal_apiStartBss: Enable Tx, Rx and Start the Bss
Oct 24 23:30:01> ----------------------------------------------------------------
Oct 24 23:30:01> ----------------------------------------------------------------
Oct 24 23:30:01> START BSS, SSID=ALFABANK34, BSSID=00-11-43-96-6A-11
Oct 24 23:30:01> ----------------------------------------------------------------
Oct 24 23:30:01> ----------------------------------------------------------------
Oct 24 23:30:01> AP Power Level = 3
Oct 24 23:30:01> Regulatory Domain = ETSI
Oct 24 23:30:01> Net[0] : Channel=2
Oct 24 23:30:01> ----------------------------------------------------------------
Oct 24 23:30:01> FW Watchdog is Enabled

_________________
Спасибо, что прочитали.