Привет всем. Не могу подключиться к устройству через консоль. Используется Hiperterminal. 9600 8-N-1. Консольный кабель из комплекта. В процессе загрузки нажимаю Ctr-C, но без толку.



Power On Self-Test

---------------------------------------------------------------------

* Testing Device Hardware: DRAM Test ..... PASSED

* Testing Device Hardware: PROM Code Checksum(Image 1) ..... PASSED


* Testing Device Hardware: Runtime Code Checksum ..... PASSED


* Testing Device Hardware: FLASH Integration Checksum ..... PASSED



PROM Version: 1.0B20-G RUNTIME Version: 1.0B53-G




D-Link DG-104SH: Initializing Device OS


------------------------------------------------------------------------




-> DUPLICATED IP CHECKING: (Hit CTRL-C to stop system boot/load )


.. IP Address: 10.1.5.55


.. Subnet Mask: 255.255.255.0


ARP Req Send ARP Reply ARP Retry Time (Sec)


------------ ----------- ----------- ------------------



1 0 0 0
2 0 1 0



-> DOWNLOAD RUN TIME IMAGE FROM FLASH: (Hit CTRL-C to stop system boot/load )

Decompress Run Time Image :

System Driver Initialization is Ready

External Switch should be Provided

In MXP Root before lock

In MXP Root after lock

After mem init

After hwu_init

NWIF: hwu_get_mac_address()=00:0f:3d:f7:ba:ec

After nw_create

Change Customer ID success.

After nwdb_create

After telnet_create

After Web_create

After Tftp_create

After Snmp_create

After Dhcpserv_create

After Nat_create

After CpeFind_create

After ntp_create

After PPPoE_create

After gg_app_create

After unlock

000000333 NMM: ATPM Update Database Granted

000000396 NMM: ATPM Configured From Flash

000000396 NMM: ATPM Update database done

000000396 TSG: 0, Switched CAS, FXS Loop Start

000000396 NMM: 0, Set Channel State Done (SUCCESS)

000000396 NMM: 0, Channel Config Done (SUCCESS)

000000396 NMM: 0, Set Channel State Done (SUCCESS)

000000396 TSG: 1, Switched CAS, FXS Loop Start

000000396 NMM: 1, Set Channel State Done (SUCCESS)

000000396 NMM: 1, Channel Config Done (SUCCESS)

000000396 NMM: 1, Set Channel State Done (SUCCESS)

000000396 TSG: 2, Switched CAS, FXS Loop Start

000000396 NMM: 2, Set Channel State Done (SUCCESS)

000000396 NMM: 2, Channel Config Done (SUCCESS)

000000396 NMM: 2, Set Channel State Done (SUCCESS)

000000396 TSG: 3, Switched CAS, FXS Loop Start

000000396 NMM: 3, Set Channel State Done (SUCCESS)

000000396 NMM: 3, Channel Config Done (SUCCESS)

000000396 NMM: 3, Set Channel State Done (SUCCESS)

000000396 HSMU: Created.

000000396 Manual GK discovery mode (IP = 84.204.136.65; Port = 1719).

000000396 Registering E.164 alias "223111".

000000396 Reporting configured profiles(1-5):

000000396 Profile # 1, "g711Ulaw64k", VIF = 1280, VAD = on

000000396 Profile # 2, "g711Alaw64k", VIF = 1280, VAD = on

000000396 Profile # 3, "g7231", VIF = 192, VAD = on

000000396 Profile # 4, "g7231", VIF = 192, VAD = on

000000396 Profile # 5, "g729AnnexA", VIF = 160, VAD = on

Username:

И дальше все. На нажатия клавиш не реиагирует.