+Ethernet eth1: MAC address 00:00:83:38:50:02
IP: 10.9.9.1/255.255.255.0, Gateway: 10.9.9.1
Default server: 10.9.9.10, DNS server IP: 0.0.0.0

EM-434 Ver.AB0 2006-02-06 (For Ver.AB)


RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 19:15:21, Feb  7 2006

Platform: CastleNet IXP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x04000000, 0x00067ef0-0x1ffd1000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.

Booting Menu:  default loading linux
1. Linux booting
2. Redboot command line
Please select:2

== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load ramdisk
RedBoot> fis load zimage
RedBoot> go -n 0x11600000
Uncompressing Linux................................................ done, booting the kernel.
Linux version 2.4.20-uc0 (rranslam@geekfish) (gcc version 3.2.1) #1 Mon Sep 1 11:39:17 PDT 2003
CPU: Intel XScale-IXP425/IXC1100 revision 1
Machine: Intel IXDP425 Development Platform
Warning: bad configuration page, trying to continue
Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
Security risk: creating user accessible mapping for 0x55000000 at 0xf5000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0x00800000,8M mem=64M@0x00000000
Calibrating delay loop... 263.78 BogoMIPS
Memory: 64MB = 64MB total
Memory: 55044KB available (1116K code, 227K data, 212K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI Autoconfig: Found Bus 0, Device 1, Function 0
PCI Autoconfig: BAR 0, I/O, size=0x100, address=0xffffff00
PCI Autoconfig: BAR 1, Mem, size=0x100, address=0x4bffff00
PCI Autoconfig: Found Bus 0, Device 2, Function 0
PCI Autoconfig: BAR 0, I/O, size=0x100, address=0xfffffe00
PCI Autoconfig: BAR 1, Mem, size=0x100, address=0x4bfffe00
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00060000 : "RedBoot"
0x00060000-0x00120000 : "zimage"
0x00120000-0x003c0000 : "ramdisk"
0x003c0000-0x00fc0000 : "unallocated space"
0x00fc0000-0x00fc1000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
0x00fe0000-0x01000000 : "FIS directory"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 8192K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 212K
Using /lib/modules/2.4.20-uc0/kernel/drivers/csr/csr.o
Warning: loading csr will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Intel CSR module init.
Using /lib/modules/2.4.20-uc0/kernel/drivers/net/ixp425_eth.o
Warning: loading ixp425_eth will taint the kernel: non-GPL license - Copyright (c) Intel Corporaixp425_eth: Initializing ixp425_eth driver 0.0.9
tion. 2002
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
ixp425_eth: Found PHY 0 at 0
ixp425_eth: Found PHY 1 at 1
ixp425_eth: Found PHY 2 at 2
ixp425_eth: Found PHY 3 at 3
ixp425_eth: Found PHY 4 at 4
ixp425_eth: Found PHY 5 at 5
ixp425_eth: Found PHY 6 at 6
ixp425_eth: Found PHY 7 at 7
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: PHY 0 MAC address is:       00:02:b3:01:01:01
ixp425_eth: PHY 1 MAC address is:       00:02:b3:02:02:02
ixp425_eth: ixp0: Leaving promiscuous mode
ixp425_eth: ixp0: Leaving promiscuous mode
ixp425_eth: ixp0: Leaving promiscuous mode
ixp425_eth: ixp0: Leaving promiscuous mode
dhcpcd[19]: dhcpStart: ioctl SIOCGIFHWADDR: No such device


Welcome to
          ____ _  _
         /  __| ||_|
    _   _| |  | | _ ____  _   _  _  _
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

For further information check:
http://www.uclinux.org/

Intel(R) IXP400 Access Library v1.2.2 Integrated



#