В show ports не отображается 28 порт:
Код:
DGS-1210-28X/ME:5# show ports 25-28
Command: show ports 25-28
Port State/ Settings Connection Address Auto
Type MDI Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning Downgrade
----- ------- --------------------- --------------------- -------- ---------
25 Enabled Auto/Disabled 1000M/Full/Disabled Enabled Disabled
N/A
26 Enabled Auto/Disabled 1000M/Full/Disabled Enabled Disabled
N/A
27 Enabled Auto/Disabled Link Down Enabled Disabled
N/A
Там direct-attach SFP+
Код:
DGS-1210-28X/ME:5# show ddm ports 28 vendor_info
Command: show ddm ports 28 vendor_info
Port : 28
------------------------------------
Connect Type : SFP - Copper pigtail
Fiber Type : Fiber copper
TX Wavelength : 0
BR, Nominal : 10G
Vendor OUI : 00:00:00
Vendor Name :
Vendor PN : C9999-2M-P-30
Vendor Rev : 0000
Vendor SN : 185180000196
Date Code : 111107
Подозрение на LACP
Код:
DGS-1210-28X/ME:5# show link_aggregation
Command: show link_aggregation
LA State : Enable
Link Aggregation Algorithm = IP_destination_source
Group ID : 1
Master Port : 25
Member Port : 25-26
Active Port : 25-26
Type : LACP
Трафик идет, проблема косметическая.
Код:
System Boot Version : 1.01.030
System Firmware Version : 7.01.B015
System Hardware Version : B1