Purpose To upload the current switch settings to a TFTP server.
SyntaxКод:
upload configuration <ipaddr> <path_filename 1-64> {startup |
running}
Description The upload command uploads the Switch’s current settings to a
TFTP server.
Parameters configuration − Specifies that the Switch’s current settings are to be
uploaded to the TFTP server.
<ipaddr> − The IP address of the TFTP server. The TFTP server
must be on the same IP subnet as the Switch.
<path_filename 1-64> − The location of the Switch configuration file
on the TFTP server.
Вход
Регистрация
FAQ
Поиск
