faq обучение настройка
Текущее время: Пт июн 20, 2025 13:00

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 11 ] 
Автор Сообщение
 Заголовок сообщения: DES-3028 пропадает подключение.
СообщениеДобавлено: Пн ноя 14, 2011 12:41 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
Имеется названный L2.
Время от времени пропадает связь с одним из портов (16-ый). Физическое соединение обнаруживается, тестирование кабеля проходит всегда успешно.
Используется IP+MAC port binding. Авторизация radius отключена. При некорректном IP+MAC "нарушитель" исправно попадает в block list. Но при правильном соответствии не находится в общем списке mac-адресов (monitoring). В итоге связь на порту отсутствует. После перезагрузки свитча проблема временно устраняется (возникает примерно раз в сутки).
Скрытый текст: показать
#-------------------------------------------------------------------

# DES-3028 Configuration

#

# Firmware: Build 2.80.B08

# Copyright(C) 2008 D-Link Corporation. All rights reserved.

#-------------------------------------------------------------------



# BASIC


config serial_port baud_rate 9600 auto_logout 10_minutes

# ACCOUNT LIST


# ACCOUNT END


# PASSWORD ENCRYPTION

disable password encryption

config terminal_line default

enable clipaging
disable command logging


# STORM


config traffic trap none

config traffic control 1-24 broadcast enable multicast enable unicast enable action drop threshold 512 countdown 5 time_interval 5

config traffic control 25-28 broadcast disable multicast disable unicast disable action drop threshold 64 countdown 0 time_interval 5


# LOOP_DETECT

enable loopdetect
config loopdetect recover_timer 60
config loopdetect interval 10
config loopdetect trap none
config loopdetect port 1-24 state enabled
config loopdetect port 25-28 state disabled


# QOS


config scheduling_mechanism strict

config scheduling 0 weight 1

config scheduling 1 weight 2

config scheduling 2 weight 4

config scheduling 3 weight 8

config 802.1p user_priority 0 1

config 802.1p user_priority 1 0

config 802.1p user_priority 2 0

config 802.1p user_priority 3 1

config 802.1p user_priority 4 2

config 802.1p user_priority 5 2

config 802.1p user_priority 6 3

config 802.1p user_priority 7 3

config cos tos value 0 class 0

config cos tos value 1 class 0

config cos tos value 2 class 0

config cos tos value 3 class 0

config cos tos value 4 class 0

config cos tos value 5 class 0

config cos tos value 6 class 0

config cos tos value 7 class 0

config dscp_mapping dscp_value 0 class 0

config dscp_mapping dscp_value 1 class 0

config dscp_mapping dscp_value 2 class 0

config dscp_mapping dscp_value 3 class 0

config dscp_mapping dscp_value 4 class 0

config dscp_mapping dscp_value 5 class 0

config dscp_mapping dscp_value 6 class 0

config dscp_mapping dscp_value 7 class 0

config dscp_mapping dscp_value 8 class 0

config dscp_mapping dscp_value 9 class 0

config dscp_mapping dscp_value 10 class 0

config dscp_mapping dscp_value 11 class 0

config dscp_mapping dscp_value 12 class 0

config dscp_mapping dscp_value 13 class 0

config dscp_mapping dscp_value 14 class 0

config dscp_mapping dscp_value 15 class 0

config dscp_mapping dscp_value 16 class 0

config dscp_mapping dscp_value 17 class 0

config dscp_mapping dscp_value 18 class 0

config dscp_mapping dscp_value 19 class 0

config dscp_mapping dscp_value 20 class 0

config dscp_mapping dscp_value 21 class 0

config dscp_mapping dscp_value 22 class 0

config dscp_mapping dscp_value 23 class 0

config dscp_mapping dscp_value 24 class 0

config dscp_mapping dscp_value 25 class 0

config dscp_mapping dscp_value 26 class 0

config dscp_mapping dscp_value 27 class 0

config dscp_mapping dscp_value 28 class 0

config dscp_mapping dscp_value 29 class 0

config dscp_mapping dscp_value 30 class 0

config dscp_mapping dscp_value 31 class 0

config dscp_mapping dscp_value 32 class 0

config dscp_mapping dscp_value 33 class 0

config dscp_mapping dscp_value 34 class 0

config dscp_mapping dscp_value 35 class 0

config dscp_mapping dscp_value 36 class 0

config dscp_mapping dscp_value 37 class 0

config dscp_mapping dscp_value 38 class 0

config dscp_mapping dscp_value 39 class 0

config dscp_mapping dscp_value 40 class 0

config dscp_mapping dscp_value 41 class 0

config dscp_mapping dscp_value 42 class 0

config dscp_mapping dscp_value 43 class 0

config dscp_mapping dscp_value 44 class 0

config dscp_mapping dscp_value 45 class 0

config dscp_mapping dscp_value 46 class 0

config dscp_mapping dscp_value 47 class 0

config dscp_mapping dscp_value 48 class 0

config dscp_mapping dscp_value 49 class 0

config dscp_mapping dscp_value 50 class 0

config dscp_mapping dscp_value 51 class 0

config dscp_mapping dscp_value 52 class 0

config dscp_mapping dscp_value 53 class 0

config dscp_mapping dscp_value 54 class 0

config dscp_mapping dscp_value 55 class 0

config dscp_mapping dscp_value 56 class 0

config dscp_mapping dscp_value 57 class 0

config dscp_mapping dscp_value 58 class 0

config dscp_mapping dscp_value 59 class 0

config dscp_mapping dscp_value 60 class 0

config dscp_mapping dscp_value 61 class 0

config dscp_mapping dscp_value 62 class 0

config dscp_mapping dscp_value 63 class 0

config 802.1p default_priority 1-28 0

config cos mapping port 1-28 ethernet 802.1p


# MIRROR


disable mirror

config mirror port 1 delete source ports 1 both


# BANDWIDTH


config bandwidth_control 1-28 rx_rate no_limit tx_rate no_limit


# SYSLOG


disable syslog

config log_save_timing on_demand


# TRAF-SEGMENTATION


config traffic_segmentation 1,5-28 forward_list 1-28

config traffic_segmentation 2 forward_list 2,25

config traffic_segmentation 3 forward_list 3,25

config traffic_segmentation 4 forward_list 4,25


# PACKET_FROM_CPU


config mgmt_pkt_priority default


# SSL


disable ssl

enable ssl ciphersuite RSA_with_RC4_128_MD5

enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA

enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA

enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5

config ssl cachetimeout 600


# PORT


config ports 1-24 speed auto flow_control disable state enable clear_description

config ports 1-28 learning enable

config ports 1-28 mdix auto

config ports 25 medium_type fiber speed auto flow_control disable state enable clear_description

config ports 25-26 medium_type fiber learning enable

config ports 25-28 speed auto flow_control disable state disable clear_description

config ports 26 medium_type fiber speed auto flow_control disable state disable clear_description


# OAM



# DDM


config ddm trap disable

config ddm log enable

config ddm ports 25-26 state enable shutdown alarm


# TIME_RANGE



# GM


config sim candidate

disable sim

config sim dp_interval 30

config sim hold_time 100


# MANAGEMENT


create trusted_host 10.0.1.5

create trusted_host 10.0.1.11

create trusted_host 10.0.1.10

create trusted_host 10.1.1.11

enable snmp traps

enable snmp authenticate traps

enable snmp linkchange_traps

config snmp linkchange_traps ports all enable
config snmp coldstart_traps enable
config snmp warmstart_traps enable

disable rmon


# SNMPv3


delete snmp community public

delete snmp community private

delete snmp user initial

delete snmp group initial

delete snmp view restricted all

delete snmp view CommunityView all

delete snmp group public

delete snmp group private

delete snmp group ReadGroup

delete snmp group WriteGroup

config snmp engineID 800000ab030022b057071a

create snmp view restricted 1.3.6.1.2.1.1 view_type included

create snmp view restricted 1.3.6.1.2.1.11 view_type included

create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included

create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included

create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included

create snmp view CommunityView 1 view_type included

create snmp view CommunityView 1.3.6.1.6.3 view_type excluded

create snmp view CommunityView 1.3.6.1.6.3.1 view_type included

create snmp group public v1 read_view CommunityView notify_view CommunityView

create snmp group public v2c read_view CommunityView notify_view CommunityView

create snmp group initial v3 noauth_nopriv read_view restricted notify_view restricted

create snmp group private v1 read_view CommunityView write_view CommunityView notify_view CommunityView

create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView

create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView

create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView

create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView

create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView

create snmp community private view CommunityView read_write

create snmp community public view CommunityView read_only

create snmp user initial initial


# DEBUG_HANDLER


debug config error_reboot enable


# VLAN


disable asymmetric_vlan

disable qinq

config vlan default advertisement enable

disable gvrp

config gvrp 1-28 state disable ingress_checking enable acceptable_frame admit_all pvid 1


# 8021X


disable 802.1x

config 802.1x auth_protocol radius_eap

config radius add 1 172.16.2.222 key secret auth_port 1812 acct_port 1813

config radius parameter timeout 5 retransmit 2

config 802.1x capability ports 1-28 none

config 802.1x auth_parameter ports 1,25-28 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable

config 802.1x auth_parameter ports 2-24 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth enable


# PORT_LOCK


disable port_security trap_log

config port_security ports 1-28 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnTimeout


# PPPOE

config pppoe circuit_id_insertion state disable
config pppoe circuit_id_insertion ports 1-28 state enable circuit_id ip


# DhcpSS

config filter dhcp_server ports 1-28 state disable
config filter dhcp_server trap_log disable
config filter dhcp_server illegal_server_log_suppress_duration 5min


# MAC_ADDRESS_TABLE_NOTIFICATION


config mac_notification interval 1 historysize 1

disable mac_notification

config mac_notification ports 1-28 disable


# STP


disable stp

config stp version rstp

config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 3 fbpdu enable hellotime 2 lbd enable lbd_recover_timer 60

config stp priority 32768 instance_id 0

config stp mst_config_id name 00:22:B0:57:07:1A revision_level 0

config stp trap new_root enable topo_change enable

config stp ports 1-28 externalCost auto edge false p2p auto state enable lbd disable

config stp mst_ports 1-28 instance_id 0 internalCost auto priority 128

config stp ports 1-28 fbpdu enable
config stp ports 1-28 restricted_role false
config stp ports 1-28 restricted_tcn false


# MULTI FILTER


create mcast_filter_profile profile_id 1 profile_name list1

config mcast_filter_profile profile_id 1 add 239.0.1.1-239.0.1.100

config max_mcast_group port 1-28 max_group 256

config limited_multicast_addr ports 1-24 add profile_id 1

config limited_multicast_addr ports 25-28 delete profile_id 1


# BPDU_PROTECTION

config bpdu_protection ports 1-28 mode shutdown


# SAFEGUARD_ENGINE


config safeguard_engine state disable utilization rising 30 falling 20 trap_log disable mode fuzzy


# BANNER_PROMP


config command_prompt default

config greeting_message default


# SSH


config ssh algorithm 3DES enable

config ssh algorithm AES128 enable

config ssh algorithm AES192 enable

config ssh algorithm AES256 enable

config ssh algorithm arcfour enable

config ssh algorithm blowfish enable

config ssh algorithm cast128 enable

config ssh algorithm twofish128 enable

config ssh algorithm twofish192 enable

config ssh algorithm twofish256 enable

config ssh algorithm MD5 enable

config ssh algorithm SHA1 enable

config ssh algorithm RSA enable

config ssh algorithm DSA enable

config ssh authmode password enable

config ssh authmode publickey enable

config ssh authmode hostbased enable

config ssh server maxsession 8

config ssh server contimeout 120

config ssh server authfail 2

config ssh server rekey never

config ssh user Admin authmode password

disable ssh


# SNOOP


enable igmp_snooping

config igmp_snooping data_driven_learning max_learned_entry 56

enable igmp_snooping multicast_vlan
create igmp_snooping multicast_vlan vlan600 600

config igmp_snooping multicast_vlan vlan600 state enable

config igmp_snooping multicast_vlan vlan600 replace_source_ip 172.17.17.30

config igmp_snooping multicast_vlan vlan600 add member_port 1-24

config igmp_snooping multicast_vlan vlan600 add source_port 25
config igmp_snooping multicast_vlan_group vlan600 add 239.0.1.1-239.0.1.100

config igmp_snooping vlan_name default host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping data_driven_learning vlan_name default aged_out disable

config igmp_snooping querier all query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable

config igmp_snooping vlan_name vlan600 host_timeout 260 router_timeout 260 leave_timer 2 fast_leave disable

config igmp_snooping data_driven_learning vlan_name vlan600 aged_out disable

config igmp access_authentication port 1-28 state disable

config cpu_filter l3_control_pkt 1-28 all state disable


# FDB


config fdb aging_time 300

config multicast port_filtering_mode 1-28 filter_unregistered_groups

disable flood_fdb

config flood_fdb log disable trap disable


# VLAN_TRUNK


disable vlan_trunk


# SMTP


disable smtp


# ACL


disable cpu_interface_filtering


# SNTP


enable sntp

config time_zone operator + hour 4 min 0

config sntp primary 10.0.1.11 secondary 0.0.0.0 poll-interval 86400

config dst disable


# DOS_PREVENTION


disable dos_prevention trap_log

config dos_prevention dos_type land_attack action drop state enable

config dos_prevention dos_type blat_attack action drop state enable

config dos_prevention dos_type smurf_attack action drop state enable

config dos_prevention dos_type tcp_null_scan action drop state enable

config dos_prevention dos_type tcp_xmascan action drop state enable

config dos_prevention dos_type tcp_synfin action drop state enable

config dos_prevention dos_type tcp_syn_srcport_less_1024 action drop state disable


# LACP


config lacp_port 1-28 mode passive

config link_aggregation algorithm mac_source


# ERPS


config erps log disable

disable erps


# ADDRBIND


disable address_binding dhcp_snoop

create address_binding ip_mac ipaddr 10.0.0.72 mac_address 1C-AF-F7-88-46-54 ports 1-28

create address_binding ip_mac ipaddr 10.0.0.74 mac_address 00-04-61-5D-24-8F ports 1-28

create address_binding ip_mac ipaddr 10.0.0.77 mac_address 00-E0-52-97-F2-59 ports 1-28

create address_binding ip_mac ipaddr 10.0.0.94 mac_address 00-E0-27-11-09-53 ports 14

create address_binding ip_mac ipaddr 10.0.0.122 mac_address 88-AE-1D-37-1F-AD ports 1-28

create address_binding ip_mac ipaddr 10.0.0.124 mac_address 00-24-54-B8-CD-16 ports 1-28

create address_binding ip_mac ipaddr 10.0.0.138 mac_address 00-1E-68-13-0A-F7 ports 19

create address_binding ip_mac ipaddr 10.0.0.157 mac_address 00-26-18-9A-8E-D9 ports 1-28

create address_binding ip_mac ipaddr 10.0.0.159 mac_address 00-1A-4D-26-5C-CB ports 1-28

create address_binding ip_mac ipaddr 10.0.0.195 mac_address 00-19-66-77-9C-00 ports 1-28

create address_binding ip_mac ipaddr 10.0.1.25 mac_address 68-B5-99-68-C0-61 ports 1-28

create address_binding ip_mac ipaddr 10.0.1.102 mac_address 6C-62-6D-38-D6-01 ports 1-28

create address_binding ip_mac ipaddr 10.0.1.134 mac_address 54-E6-FC-85-87-37 ports 16

create address_binding ip_mac ipaddr 10.0.1.149 mac_address F0-DE-F1-0E-60-5C ports 10

create address_binding ip_mac ipaddr 10.0.1.153 mac_address 00-0F-B0-96-C2-3C ports 9

disable address_binding trap_log

config address_binding ip_mac ports 1-24 state enable strict allow_zeroip disable forward_dhcppkt disable

config address_binding ip_mac ports 1-28 mode arp stop_learning_threshold 500

config address_binding dhcp_snoop max_entry ports 1-28 limit 5

config address_binding ip_mac ports 25-28 state disable allow_zeroip disable forward_dhcppkt enable


# ARPSPOOF



# IP


config ipif System vlan default ipaddress 10.0.0.30/16 state enable

config ipif System dhcp_option12 state disable

enable telnet 23

enable web 80

disable autoconfig


# LLDP


disable lldp

config lldp message_tx_interval 30

config lldp tx_delay 2

config lldp message_tx_hold_multiplier 4

config lldp reinit_delay 2

config lldp notification_interval 5

config lldp ports 1-28 notification disable

config lldp ports 1-28 admin_status tx_and_rx


# MLDSNP


disable mld_snooping


# ARP


config arp_aging time 20

config gratuitous_arp send ipif_status_up enable

config gratuitous_arp send dup_ip_detected enable

config gratuitous_arp learning enable


# AAA


create authen server_host 172.16.2.222 protocol radius port 1812 key "secret" timeout 5 retransmit 2

config authen server_group radius delete server_host 172.16.2.222 protocol radius

config authen server_group radius add server_host 172.16.2.222 protocol radius

config authen_login default method radius

config authen_enable default method radius

config authen application console login default

config authen application console enable default

config authen application telnet login default

config authen application telnet enable default

config authen application ssh login default

config authen application ssh enable default

config authen application http login default

config authen application http enable default

config authen parameter response_timeout 30

config authen parameter attempt 3

disable authen_policy

config admin local_enable





# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace
config dhcp_relay option_82 remote_id default


# DHCP_LOCAL_RELAY

disable dhcp_local_relay
config dhcp_local_relay option_82 remote_id default
config dhcp_local_relay option_82 ports 1-28 policy keep


# FIRM


config configuration trap save disable upload disable download disable


# ROUTE


create iproute default 10.0.0.1 1


#-------------------------------------------------------------------

# End of configuration file for DES-3028

#-------------------------------------------------------------------


Последний раз редактировалось mute_r Пн ноя 14, 2011 14:37, всего редактировалось 1 раз.

Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3200 пропадает подключение.
СообщениеДобавлено: Пн ноя 14, 2011 12:51 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
Попробуйте, пожалуйста, ситуацию с режимом loose на портах.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Пн ноя 14, 2011 14:39 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
Извиняюсь. Модель: des-3028 - по конфигу видно.
Не подскажете где loose включается?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Пн ноя 14, 2011 14:45 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
Примерно так:
Код:
config address_binding ip_mac ports 1-24 state enable loose


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Сб ноя 19, 2011 08:34 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
Конкретный порт перенастроил на loose. Проблема осталась. Поключили к др. порту - то же самое.
Остальные подключения работают штатно.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Сб ноя 19, 2011 09:08 
Не в сети

Зарегистрирован: Вт июн 01, 2010 04:38
Сообщений: 794
Откуда: Vladivostok
mute_r писал(а):
Конкретный порт перенастроил на loose. Проблема осталась. Поключили к др. порту - то же самое.
Остальные подключения работают штатно.

А мак видно на порту?

_________________
2008-2015г. компания Экстрим Интернет. Технический директор/Главный системный администратор.
2015-по н.в. компания "Подряд". Инженер сети ШПД


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Сб ноя 19, 2011 10:16 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
Всё как в первом сообщении: MAC на порту не виден, в этот момент связи с абонентом нет. После перезапуска коммутатора mac полявляется в списке, связь есть. По истечении некоторого времени связь пропадает, при этом mac-а в списке уже нет. "Диагностика кабеля" всегда оповещает об успешном физ. соединении на 18метрах.
Если принудительно задать другой ip-адрес (не присутствует в списке разрешённых пар ip-mac), то mac сразу попадает в список заблокированных. При возвращении в разрешённый адрес - пропадает из списка блокированных, но в общем списке обнаруженных не появляется (до перезагрузки свитча).

Остальные соединения таким не грешат, хотя настроены на strict.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Пн ноя 21, 2011 10:05 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Вт янв 18, 2011 13:29
Сообщений: 8999
Попробуйте обновить прошивку. Сейчас доступна версия 2.90-B07


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Вт окт 09, 2012 08:52 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
Прошивка 2.90-B10.
Всё то же самое.
Включил flood_fdb. show flood_fdb выдаёт пустой список. На самом компьютере при попытке пинга шлюза, конечно, ошибка. При этом просмотр arp -a выдаёт ip адрес шлюза с mac 00-00-00-00-00-00 (недопустимый).
Смена mac на компьютере не помогает. Подключение недоступно сразу, даже после рестарта коммутатора.

Такое поведение наблюдается выборочно на разных DES-3028.


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Вт окт 09, 2012 19:28 
Не в сети

Зарегистрирован: Сб сен 25, 2010 16:15
Сообщений: 26
а перезагрузка порта помогает?


Вернуться наверх
 Профиль  
 
 Заголовок сообщения: Re: DES-3028 пропадает подключение.
СообщениеДобавлено: Ср окт 10, 2012 09:38 
Не в сети

Зарегистрирован: Пн июн 20, 2011 07:36
Сообщений: 72
нет. Даже перезагрузка коммутатора не помогает.


Вернуться наверх
 Профиль  
 
Показать сообщения за:  Сортировать по:  
Начать новую тему Ответить на тему  [ Сообщений: 11 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 47


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB