rlEnvMonFanState OBJECT-TYPE
SYNTAX RlEnvMonState
MAX-ACCESS read-only

STATUS current
DESCRIPTION
"The mandatory state of the fan being instrumented."
::= { rlEnvMonFanStatusEntry 3 }

RlEnvMonState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the state of a device being monitored.
Valid values are:

normal(1): the environment is good, such as low
temperature.

warning(2): the environment is bad, such as temperature
above normal operation range but not too
high.

critical(3): the environment is very bad, such as
temperature much higher than normal
operation limit.

shutdown(4): the environment is the worst, the system
should be shutdown immediately.

notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.

notFunctioning(6): the environmental monitor does not
function properly, such as a temperature
sensor generates a abnormal data like
1000 C.
"