Здравствуйте. Купил DSL-524T установил, выполнил все по инструкции ввел имя пользователя и пароль, и после перезагрузки модема должно было установится соединение с интернетом, но соединения нет. Что делать? Сижу на дальсвязи, версия прошивки V3.02B01T01.RU-A.20071225

Приведите логи модема со страницы Status > Log.

Time Message
Jan 1 12:00:13> NTP Polling Timer for DHCP Started succesfully.
Jan 1 12:00:13> DSL Polling Timer Started succesfully.
Jan 1 12:00:13> Firewall NAT service started
Jan 1 12:00:17> starting on port 80
Jan 1 12:00:17> (c)2000 Netfilter core team
Jan 1 12:00:17> netfilter PSD loaded - (c) astaro AG
Jan 1 12:00:17> Initializing the WAN Bridge.
Jan 1 12:00:17> Please set the MAC Address for the WAN Bridge.
Jan 1 12:00:17> Set the Environment variable 'wan_br_mac'.
Jan 1 12:00:17> xx.xx.xx.xx.xx.xx
Jan 1 12:00:17> Mounted root (squashfs filesystem) readonly.
Jan 1 12:00:17> Mounted devfs on /dev
Jan 1 12:00:17> 64k freed
Jan 1 12:00:17> Algorithmics/MIPS FPU Emulator v1.5
Jan 1 12:00:17> registered device TI Avalanche SAR
Jan 1 12:00:17> Sangam detected
Jan 1 12:00:17> DSP binary filesize = 385738 bytes
Jan 1 12:00:17> Setting mode to 0xffff
Jan 1 12:00:17> version:[7.03.01.00]
Jan 1 12:00:17> Disable_igmp_snooping_register!!!
Jan 1 12:00:17> Setting mode to 0xffff
Jan 1 12:00:17> Default Asymmetric MTU for nas0 1500
Jan 1 12:00:17> Registering protocol inspector: 0x941759c8 for VCC:0x94258a00
Jan 1 12:00:17> Default Asymmetric MTU for br0 1500
Jan 1 12:00:17> Bridge Created: br0
Jan 1 12:00:18> Bridge Created: br1
Jan 1 12:00:18> Bridge Interface Added: eth0
Jan 1 12:00:19> 2
Jan 1 12:00:19> Default Asymmetric MTU for br1 1500
Jan 1 12:00:19> 2
Jan 1 12:00:23> DSL Carrier is down
Jan 1 12:02:37> closing 0.8.35.5
Jan 1 12:02:37> tn7sar_teardown_complete called for channel 0
Jan 1 12:02:37> ChannelTeardown returned rc = 0
Jan 1 12:02:56> DSL in Sync
Jan 1 12:03:03> DSL Carrier is up
Jan 1 12:03:03> sar read trained mode (5)(ADSL_2plus)
Jan 1 12:03:05> Default Asymmetric MTU for nas0 1500
Jan 1 12:03:05> Registering protocol inspector: 0x941759c8 for VCC:0x94258800
Jan 1 12:03:06> pppd 2.4.3 started by root, uid 0
Jan 1 12:03:41> Timeout waiting for PADO packets
Jan 1 12:03:41> Unable to complete PPPoE Discovery
Jan 1 12:03:41> PPPD Successfully Launched
Jan 1 12:03:43> pppd 2.4.3 started by root, uid 0
Jan 1 12:04:18> PPPD Successfully Launched
Jan 1 12:04:18> Timeout waiting for PADO packets
Jan 1 12:04:18> Unable to complete PPPoE Discovery
Jan 1 12:04:18> pppd 2.4.3 started by root, uid 0
Jan 1 12:04:53> PPPD Successfully Launched
Jan 1 12:04:53> Timeout waiting for PADO packets
Jan 1 12:04:53> Unable to complete PPPoE Discovery
Jan 1 12:04:53> pppd 2.4.3 started by root, uid 0
Jan 1 12:05:28> PPPD Successfully Launched
Jan 1 12:05:28> Timeout waiting for PADO packets
Jan 1 12:05:28> Unable to complete PPPoE Discovery
Jan 1 12:05:28> pppd 2.4.3 started by root, uid 0

нет ответа от сервера провайдера на запрос установления сессии PPPoE

Поставил стандартный модем который выдает дальсвязь, все работает нормально... Так что делать с 524Т??

Отдал в сервисный центр, там все сделали.