Ну ерунду показывает, а не статистику. 500Т показывал нормально, до этого.
cfgmaker --global 'WorkDir: /usr/local/www/mrtg' --output /usr/local/etc/mrtg/10.9.0.1_mrtg.cfg 10.9.0.1
# Created by
# /usr/local/bin/cfgmaker --global "WorkDir: /usr/local/www/mrtg" --output /usr/local/etc/mrtg/10.9.0.1_mrtg.cfg 10.9.0.1
Мало того что по рекомендованным Target[10.9.0.1_1]... нет информации.
Пробовал Target[10.9.0.1_4], Target[10.9.0.1_5], Target[10.9.0.1_6]
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
WorkDir: /usr/local/www/mrtg
######################################################################
# System: DSL-2500U
# Description: Software Version RU_1.54
# Contact: ADSL
# Location: D-Link
######################################################################
### Interface 1 >> Descr: 'dsl0' | Name: '' | Ip: '' | Eth: '' ###
Target[10.9.0.1_1]: 1:public@10.9.0.1:
SetEnv[10.9.0.1_1]: MRTG_INT_IP="" MRTG_INT_DESCR="dsl0"
MaxBytes[10.9.0.1_1]: 236000
Title[10.9.0.1_1]: Traffic Analysis for 1 -- DSL-2500U
PageTop[10.9.0.1_1]: <h1>Traffic Analysis for 1 -- DSL-2500U</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>DSL-2500U in D-Link</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>ADSL</td>
</tr>
<tr>
<td>Description:</td>
<td>dsl0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>Asymetric Digitial Subscriber Loop (ADSL) (94)</td>
</tr>
<tr>
<td>ifName:</td>
<td></td>
</tr>
<tr>
<td>Max Speed:</td>
<td>236.0 kBytes/s</td>
</tr>
</table>
</div>
### Interface 2 >> Descr: 'atm0' | Name: '' | Ip: '' | Eth: '' ###
Target[10.9.0.1_2]: 2:public@10.9.0.1:
SetEnv[10.9.0.1_2]: MRTG_INT_IP="" MRTG_INT_DESCR="atm0"
MaxBytes[10.9.0.1_2]: 236000
Title[10.9.0.1_2]: Traffic Analysis for 2 -- DSL-2500U
PageTop[10.9.0.1_2]: <h1>Traffic Analysis for 2 -- DSL-2500U</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>DSL-2500U in D-Link</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>ADSL</td>
</tr>
<tr>
<td>Description:</td>
<td>atm0 </td>
</tr>
<tr>
<td>ifType:</td>
<td>atm (37)</td>
</tr>
<tr>
<td>ifName:</td>
<td></td>
</tr>
<tr>
<td>Max Speed:</td>
<td>236.0 kBytes/s</td>
</tr>
</table>
</div>
### Interface 3 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[10.9.0.1_3]: 3:public@10.9.0.1:
# SetEnv[10.9.0.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
# MaxBytes[10.9.0.1_3]: 0
# Title[10.9.0.1_3]: Traffic Analysis for 3 -- DSL-2500U
# PageTop[10.9.0.1_3]: <h1>Traffic Analysis for 3 -- DSL-2500U</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>DSL-2500U in D-Link</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>ADSL</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>eth0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ethernetCsmacd (6)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td></td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# </table>
# </div>
### Interface 4 >> Descr: 'br0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[10.9.0.1_4]: 4:public@10.9.0.1:
# SetEnv[10.9.0.1_4]: MRTG_INT_IP="" MRTG_INT_DESCR="br0"
# MaxBytes[10.9.0.1_4]: 0
# Title[10.9.0.1_4]: Traffic Analysis for 4 -- DSL-2500U
# PageTop[10.9.0.1_4]: <h1>Traffic Analysis for 4 -- DSL-2500U</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>DSL-2500U in D-Link</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>ADSL</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>br0 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ethernetCsmacd (6)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td></td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# </table>
# </div>
### Interface 5 >> Descr: 'nas_0_1_32' | Name: '' | Ip: '' | Eth: '' ###
Target[10.9.0.1_5]: 5:public@10.9.0.1:
SetEnv[10.9.0.1_5]: MRTG_INT_IP="" MRTG_INT_DESCR="nas_0_1_32"
MaxBytes[10.9.0.1_5]: 236000
Title[10.9.0.1_5]: Traffic Analysis for 5 -- DSL-2500U
PageTop[10.9.0.1_5]: <h1>Traffic Analysis for 5 -- DSL-2500U</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>DSL-2500U in D-Link</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>ADSL</td>
</tr>
<tr>
<td>Description:</td>
<td>nas_0_1_32 </td>
</tr>
<tr>
<td>ifType:</td>
<td>aal5 (49)</td>
</tr>
<tr>
<td>ifName:</td>
<td></td>
</tr>
<tr>
<td>Max Speed:</td>
<td>236.0 kBytes/s</td>
</tr>
</table>
</div>
### Interface 6 >> Descr: 'ppp_0_1_32_1' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[10.9.0.1_6]: 6:public@10.9.0.1:
# SetEnv[10.9.0.1_6]: MRTG_INT_IP="" MRTG_INT_DESCR="ppp_0_1_32_1"
# MaxBytes[10.9.0.1_6]: 0
# Title[10.9.0.1_6]: Traffic Analysis for 6 -- DSL-2500U
# PageTop[10.9.0.1_6]: <h1>Traffic Analysis for 6 -- DSL-2500U</h1>
# <div id="sysdetails">
# <table>
# <tr>
# <td>System:</td>
# <td>DSL-2500U in D-Link</td>
# </tr>
# <tr>
# <td>Maintainer:</td>
# <td>ADSL</td>
# </tr>
# <tr>
# <td>Description:</td>
# <td>ppp_0_1_32_1 </td>
# </tr>
# <tr>
# <td>ifType:</td>
# <td>ppp (23)</td>
# </tr>
# <tr>
# <td>ifName:</td>
# <td></td>
# </tr>
# <tr>
# <td>Max Speed:</td>
# <td>0.0 Bytes/s</td>
# </tr>
# </table>
# </div>
Вход
Регистрация
FAQ
Поиск
