Здравствуйте.

После нажатия кнопки Reset на DSL-1500G. Устройство не загружается. В консоль выводит:

NBfs1Z
PP Boot 8.2.0.8.1 (9 May 2002)
SDRAM size = 0x1000000
Flash boot failed.

Entered console ... No, or bad, ATMOS images.

Возможно ли это исправить? Что можно сделать?

по команде help выводится следующее:

]help
Commands to the console are:
configeeprom display EEPROM configuration information
configflash display FLASH configuration information
copyimages {yes | no} copy network booted image files
flashfs {auto | emergency} use automatic FLASHFS selection or
force boot from emergency FLASHFS
initialise initialise configuration information
listenv list environment variables
mac <address> set MAC address
serialboot yes boot from EEPROM
serialboot no boot from FLASH
setenv <key> <value> set environment variable
unsetenv <key> unset environment variable
The following boot modes are supported by serial EEPROM v3.0+ only:
serialboot {yes | auto} boot via EEPROM, auto-select Ethernet or USB
serialboot ethernet boot via EEPROM from Ethernet only
serialboot usb boot via EEPROM from USB only
serialboot no boot from FLASH
dw <address> [<length>] dump words (hex/ascii)
enter <address> enter an image
erw <wrdaddress> read a single word from EEPROM
eww <wrdaddress> <value> write a single word to EEPROM
fdw <address> [<length>] dump flash words (hex/ascii)
flash config print flash configuration
help print this text
quit leave the console
reset reset system
rw <address> read a single word
tftp download image using tftp
why reason for console entry
ww <address> <value> write a single word
xmodem [fast] download mkflash image using X-Modem
]

Заранее спасибо.

Несите устройство в ближайший к Вам сервис.