Подскажите где можно скачать прошивку для модема Skylink Airplus MCD-650 под роутер DIR-320
Прошивка http://ftp.dlink.ru/pub/Router/DIR-320/ ... -rc119.bin
работает с ётой, но не видит модем Airplus MCD-650
В форумах ссылаются на какую-то старую прошивку, но её нет на фтп или я не нашел

С какой версией прошивки DIR-320 в принципе поддерживает модем MCD-650 или не поддерживает совсем?

После прошивки сброс на заводские настройки осуществлялся?

_________________
Форум не подразумевает под собой быстрый ответ, хотите быстрый и квалифицированный ответ - звоните в техподдержку компании D-Link 8-800-700-5465

Конечно, и кнопкой и в меню

Вот лог выгрузил после сброса, видимо не обнаруживает модем, но на модеме горит индикатор активности.

Jan 1 03:00:09 syslogd started: BusyBox v1.15.2
Jan 1 03:00:10 resolv: auto = shsh_define
Jan 1 03:00:10 resolv: Do dns from
Jan 1 03:00:10 madwimax[197]: Bus 002 Device 001: ID 0000:0000
Jan 1 03:00:10 madwimax[197]: Bus 001 Device 001: ID 0000:0000
Jan 1 03:00:10 madwimax[197]: Bus 001 Device 002: ID 1011:3198
Jan 1 03:00:10 madwimax[197]: Could not find/open device
Jan 1 03:00:18 get_vservers_filters: start
Jan 1 03:00:18 get_vservers_filters: done
Jan 1 03:00:18 get_masquerading: start
Jan 1 03:00:18 get_masquerading: done
Jan 1 03:00:18 get_url_filters: start
Jan 1 03:00:18 get_url_filters: done
Jan 1 03:00:18 dnsmasq[310]: started, version 2.22 cachesize 150
Jan 1 03:00:18 dnsmasq[310]: DHCP, IP range 192.168.0.100 -- 192.168.0.199, lease time 180h
Jan 1 03:00:18 dnsmasq[310]: DHCP, /var/lib/misc/dnsmasq.leases will be written every 24h
Jan 1 03:00:18 dnsmasq[310]: running as root
Jan 1 03:00:18 dnsmasq[310]: read /etc/hosts - 3 addresses
Jan 1 03:00:18 dnsmasq[310]: read /tmp/hosts.runtime - 3 addresses
Jan 1 03:00:18 dnsmasq[310]: read /etc/ethers - 0 addresses
Jan 1 03:00:18 dnsmasq[310]: reading /etc/resolv.conf
Jan 1 03:00:19 udhcpc[329]: udhcpc (v1.15.2) started
Jan 1 03:00:19 dnsmasq[310]: read /etc/hosts - 3 addresses
Jan 1 03:00:19 dnsmasq[310]: read /tmp/hosts.runtime - 3 addresses
Jan 1 03:00:19 dnsmasq[310]: read /etc/ethers - 0 addresses
Jan 1 03:00:19 dnsmasq[310]: reading /etc/resolv.conf
Jan 1 03:00:19 dhcp client: deconfig: lease is lost
Jan 1 03:00:19 resolv: auto = shsh_define
Jan 1 03:00:19 resolv: Do dns from
Jan 1 03:00:19 dnsmasq[310]: read /etc/hosts - 3 addresses
Jan 1 03:00:19 dnsmasq[310]: read /tmp/hosts.runtime - 3 addresses
Jan 1 03:00:19 dnsmasq[310]: read /etc/ethers - 0 addresses
Jan 1 03:00:19 dnsmasq[310]: reading /etc/resolv.conf
Jan 1 03:00:19 udhcpc[329]: Sending discover...
Jan 1 03:00:22 udhcpc[329]: Sending discover...
Jan 1 03:00:25 udhcpc[329]: Sending discover...
Jan 1 03:00:28 udhcpc[329]: Sending discover...
Jan 1 03:00:31 udhcpc[329]: Sending discover...
Jan 1 03:00:34 udhcpc[329]: No lease, forking to background
Jan 1 03:00:34 dnsmasq[310]: read /etc/hosts - 3 addresses
Jan 1 03:00:34 dnsmasq[310]: read /tmp/hosts.runtime - 3 addresses
Jan 1 03:00:34 dnsmasq[310]: read /etc/ethers - 0 addresses
Jan 1 03:00:34 dnsmasq[310]: reading /etc/resolv.conf
Jan 1 03:00:35 init_3g: Start init
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x12d1 connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x19d2 connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x16d8 connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x05c6 connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x16d5 connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x1bbb connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem from vendor 0x1edf connected
Jan 1 03:00:35 init_3g: seems like no 3G USB modem connected
Jan 1 03:00:36 igmpproxy[448]: There must be at least 2 Vif's where one is upstream.
Jan 1 03:00:36 watchdog[458]: init begin
Jan 1 03:00:36 watchdog[458]: status watchdog = 0
Jan 1 03:00:36 watchdog[458]: enable gen IP = 1
Jan 1 03:00:36 watchdog[458]: gen IP = 217.69.128.43
Jan 1 03:00:36 watchdog[458]: sleep time = 15
Jan 1 03:00:36 watchdog[458]: watch route = default
Jan 1 03:00:36 watchdog[458]: link[0]: name = ether, prefix = vlan, ip = 217.69.128.43
Jan 1 03:00:36 watchdog[458]: ctype = ping, maxpack = 10, timeout = 10
Jan 1 03:00:36 watchdog[458]: wt = -1.000000, wpl = 80, ct = 1000.000000, cpl = -1
Jan 1 03:00:36 watchdog[458]: link[1]: name = 3g, prefix = ppp, ip = 217.69.128.44
Jan 1 03:00:36 watchdog[458]: ctype = ping, maxpack = 10, timeout = 10
Jan 1 03:00:36 watchdog[458]: wt = -1.000000, wpl = 70, ct = -1.000000, cpl = 80
Jan 1 03:00:36 watchdog[458]: init done
Jan 1 03:00:36 watchdog[458]: Watchdog started...
Jan 1 03:00:36 watchdog[458]: Watchdog disable, exit ...
Jan 1 03:01:01 crond[173]: USER admin pid 460 cmd /bin/check_resident
Jan 1 03:01:04 udhcpc[349]: Sending discover...
Jan 1 03:01:07 udhcpc[349]: Sending discover...
Jan 1 03:01:10 udhcpc[349]: Sending discover...
Jan 1 03:01:13 udhcpc[349]: Sending discover...
Jan 1 03:01:16 udhcpc[349]: Sending discover...
Jan 1 03:01:49 udhcpc[349]: Sending discover...
Jan 1 03:01:52 udhcpc[349]: Sending discover...
Jan 1 03:01:55 udhcpc[349]: Sending discover...
Jan 1 03:01:58 udhcpc[349]: Sending discover...
Jan 1 03:02:01 udhcpc[349]: Sending discover...
Jan 1 03:02:01 crond[173]: USER admin pid 509 cmd /bin/check_resident