#-------------------------------------------------------------------
#                       DES-3526 Configuration
#
#                       Firmware: Build 5.01-B48
#        Copyright(C) 2008 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------


# BASIC

config serial_port baud_rate 9600 auto_logout 10_minutes
enable telnet 23
disable web

# ACCOUNT LIST


# PASSWORD ENCRYPTION

enable password encryption
config terminal_line default

# BNR

config command_prompt default

# STORM

config traffic control_trap none
config traffic control 1-3 broadcast enable multicast enable unicast enable  action drop threshold 64000
config traffic control 4-5 broadcast disable multicast disable unicast disable  action drop threshold 128000

# LOOP_DETECT

enable loopdetect
config loopdetect recover_timer 60
config loopdetect interval 10
config loopdetect mode port-based
config loopdetect ports 1-24 state enabled
config loopdetect ports 25-26 state disabled

# GM

config sim candidate
disable sim
config sim dp_interval 30
config sim hold_time 100

# SYSLOG

enable syslog
config system_severity trap information
config system_severity log information

# QOS

config scheduling 0 max_packet 0 max_latency 0
config scheduling 1 max_packet 0 max_latency 0
config scheduling 2 max_packet 0 max_latency 0
config scheduling 3 max_packet 0 max_latency 0
config 802.1p user_priority 0  1
config 802.1p user_priority 1  0
config 802.1p user_priority 2  0
config 802.1p user_priority 3  1
config 802.1p user_priority 4  2
config 802.1p user_priority 5  2
config 802.1p user_priority 6  3
config 802.1p user_priority 7  3
config 802.1p default_priority 1-26 0
config bandwidth_control 1-26 rx_rate no_limit tx_rate no_limit

# MIRROR

disable mirror

# TRAF-SEGMENTATION

config traffic_segmentation 1-26 forward_list 1-26

# PORT

config ports 1-21 speed auto flow_control disable mdix auto learning enable state enable trap enable
config ports 22-24 speed auto flow_control enable mdix auto learning enable state disable trap enable
config ports 25 medium_type copper speed auto flow_control disable mdix auto learning enable state enable trap enable
config ports 25 medium_type fiber speed auto flow_control disable learning enable state enable trap enable
config ports 26 medium_type copper speed auto flow_control disable mdix auto learning enable state enable trap disable
config ports 26 medium_type fiber speed auto flow_control disable learning enable state enable trap disable

# PORT_LOCK

disable port_security trap_log
config port_security ports 1-21 admin_state disable max_learning_addr 7 lock_address_mode DeleteOnTimeout
config port_security ports 22-26 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset

# 8021X

disable 802.1x
config 802.1x auth_protocol radius_eap
config 802.1x capability ports 1-26 none
config 802.1x auth_parameter ports 1-26 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable

# SNMPv3

delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all
config snmp engineID 800000ab03001b11b5f57e
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included
create snmp group public v1 read_view CommunityView notify_view CommunityView
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3  noauth_nopriv read_view restricted notify_view restricted
create snmp group private v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp community private view CommunityView read_write
create snmp community public view CommunityView read_only
create snmp user initial initial

# MANAGEMENT

enable snmp traps
enable snmp authenticate traps
config snmp system_name D-Link
disable rmon

# VLAN

disable asymmetric_vlan
config vlan default delete 1-26
config vlan default add untagged 1-26
config vlan default advertisement enable
disable gvrp
config gvrp 1-26 state disable ingress_checking enable acceptable_frame admit_all pvid 1

# FDB

config fdb aging_time 30
config multicast port_filtering_mode 1-26 forward_unregistered_groups

# MAC_ADDRESS_TABLE_NOTIFICATION

config mac_notification interval 1 historysize 1
disable mac_notification
config mac_notification ports 1-26 disable

# STP

config stp version rstp
config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 3 fbpdu enable
config stp priority 32768 instance_id 0
config stp hellotime 2
config stp mst_config_id name 00:1B:11:B5:F5:7E revision_level 0
disable stp
config stp ports 1-26 externalCost auto edge false p2p auto state enable
config stp ports 1-26 fbpdu disable
config stp ports 1-26 restricted_role false
config stp ports 1-26 restricted_tcn false
config stp mst_ports 1-26 instance_id 0 internalCost auto priority 128

# SSH

config ssh server maxsession 8
config ssh server contimeout 300
config ssh server authfail 2
config ssh server rekey never
config ssh server port 22
disable ssh

# SSL

disable ssl
enable ssl ciphersuite RSA_with_RC4_128_MD5
enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
config ssl cachetimeout timeout 600

# SAFE_GUARD

config safeguard_engine state enable cpu_utilization rising_threshold 90 falling_threshold 60 trap_log enable

# TIMERANGE


# ACL

create access_profile ip udp src_port_mask 0xFFFF profile_id 1
config access_profile profile_id 1 add access_id 1 ip udp src_port 67 port 1 deny
config access_profile profile_id 1 add access_id 2 ip udp src_port 68 port 1 deny
config access_profile profile_id 1 add access_id 3 ip udp src_port 67 port 2 deny
config access_profile profile_id 1 add access_id 4 ip udp src_port 68 port 2 deny
config access_profile profile_id 1 add access_id 5 ip udp src_port 67 port 3 deny
config access_profile profile_id 1 add access_id 6 ip udp src_port 68 port 3 deny
config access_profile profile_id 1 add access_id 7 ip udp src_port 67 port 4 deny
config access_profile profile_id 1 add access_id 8 ip udp src_port 68 port 4 deny
config access_profile profile_id 1 add access_id 9 ip udp src_port 67 port 5 deny
config access_profile profile_id 1 add access_id 10 ip udp src_port 68 port 5 deny
config access_profile profile_id 1 add access_id 11 ip udp src_port 67 port 6 deny
config access_profile profile_id 1 add access_id 12 ip udp src_port 68 port 6 deny
config access_profile profile_id 1 add access_id 13 ip udp src_port 67 port 7 deny
config access_profile profile_id 1 add access_id 14 ip udp src_port 68 port 7 deny
config access_profile profile_id 1 add access_id 15 ip udp src_port 67 port 8 deny
config access_profile profile_id 1 add access_id 16 ip udp src_port 68 port 8 deny
config access_profile profile_id 1 add access_id 17 ip udp src_port 67 port 9 deny
config access_profile profile_id 1 add access_id 18 ip udp src_port 68 port 9 deny
config access_profile profile_id 1 add access_id 19 ip udp src_port 67 port 10 deny
config access_profile profile_id 1 add access_id 20 ip udp src_port 68 port 10 deny
config access_profile profile_id 1 add access_id 21 ip udp src_port 67 port 11 deny
config access_profile profile_id 1 add access_id 22 ip udp src_port 68 port 11 deny
config access_profile profile_id 1 add access_id 23 ip udp src_port 67 port 12 deny
config access_profile profile_id 1 add access_id 24 ip udp src_port 68 port 12 deny
config access_profile profile_id 1 add access_id 25 ip udp src_port 67 port 13 deny
config access_profile profile_id 1 add access_id 26 ip udp src_port 68 port 13 deny
config access_profile profile_id 1 add access_id 27 ip udp src_port 67 port 14 deny
config access_profile profile_id 1 add access_id 28 ip udp src_port 68 port 14 deny
config access_profile profile_id 1 add access_id 29 ip udp src_port 67 port 15 deny
config access_profile profile_id 1 add access_id 30 ip udp src_port 68 port 15 deny
config access_profile profile_id 1 add access_id 31 ip udp src_port 67 port 16 deny
config access_profile profile_id 1 add access_id 32 ip udp src_port 68 port 16 deny
config access_profile profile_id 1 add access_id 33 ip udp src_port 67 port 17 deny
config access_profile profile_id 1 add access_id 34 ip udp src_port 68 port 17 deny
config access_profile profile_id 1 add access_id 35 ip udp src_port 67 port 18 deny
config access_profile profile_id 1 add access_id 36 ip udp src_port 68 port 18 deny
config access_profile profile_id 1 add access_id 37 ip udp src_port 67 port 19 deny
config access_profile profile_id 1 add access_id 38 ip udp src_port 68 port 19 deny
config access_profile profile_id 1 add access_id 39 ip udp src_port 67 port 20 deny
config access_profile profile_id 1 add access_id 40 ip udp src_port 68 port 20 deny
config access_profile profile_id 1 add access_id 41 ip udp src_port 67 port 21 deny
config access_profile profile_id 1 add access_id 42 ip udp src_port 68 port 21 deny

disable cpu_interface_filtering

# SNTP

enable sntp
config time_zone operator + hour 3 min 0
config sntp primary 193.125.78.100 secondary 0.0.0.0 poll-interval 720
config dst disable

# IPBIND
config address_binding ip_mac ports 1-21 state enable
config address_binding ip_mac ports 1-21 allow_zeroip enable
config address_binding ip_mac ports 1-26 forward_dhcppkt disable
config address_binding ip_mac ports 1-21 state enable loose
disable address_binding acl_mode
enable address_binding trap_log
enable address_binding dhcp_snoop
config address_binding dhcp_snoop max_entry ports 1-21 limit 7
config address_binding dhcp_snoop max_entry ports 22-24 limit 5
config address_binding dhcp_snoop max_entry ports 25-26 limit no_limit


# FILTER


# ARP_Spoofing_Prevention


# ROUTE


# SNOOP

disable igmp_snooping
config igmp_snooping default host_timeout 260 router_timeout 260 leave_timer 2 state disable
config igmp_snooping querier default query_interval 125 max_response_time 10 robustness_variable 2
config igmp_snooping querier default last_member_query_interval 1 state disable
config limited_multicast_addr ports 1-26 access deny state disable

# LACP

config link_aggregation algorithm ip_source_dest
create link_aggregation group_id 1
config link_aggregation group_id 1 master_port 25 ports 25-26 state enable
config lacp_port 1-26 mode passive

# GVLAN


# IP

config ipif System vlan default ipaddress 10.45.102.1/20 state enable
disable autoconfig

# ARP

config arp_aging time 10
config gratuitous_arp send ipif_status_up enable
config gratuitous_arp send dup_ip_detected enable
config gratuitous_arp learning enable

# LLDP

disable lldp
config lldp message_tx_interval 30
config lldp tx_delay 2
config lldp message_tx_hold_multiplier 4
config lldp reinit_delay 2
config lldp notification_interval 5
config lldp ports 1-26 notification disable
config lldp ports 1-26 admin_status tx_and_rx

# ACCESS_AUTHENTICATION_CONTROL

config authen_login default method local
config authen_enable default method local_enable
config authen application console login default
config authen application console enable default
config authen application telnet login default
config authen application telnet enable default
config authen application ssh login default
config authen application ssh enable default
config authen application http login default
config authen application http enable default
config authen parameter response_timeout 30
config authen parameter attempt 3
config authen enable_admin all state enable
disable authen_policy

# DHCP_RELAY

enable dhcp_relay
config dhcp_relay hops 16 time 0
config dhcp_relay option_82 state enable
config dhcp_relay option_82 check enable
config dhcp_relay option_82 policy replace
config dhcp_relay option_82 remote_id default
config dhcp_relay option_60 state disable
config dhcp_relay option_60 default mode drop
config dhcp_relay option_61 state disable
config dhcp_relay option_61 default drop
config dhcp_relay add ipif System 10.45.100.1

# DHCP_LOCAL_RELAY

disable dhcp_local_relay

#-------------------------------------------------------------------
#             End of configuration file for DES-3526
#-------------------------------------------------------------------