faq обучение настройка
Текущее время: Вт июл 22, 2025 19:40

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 10 ] 
Автор Сообщение
СообщениеДобавлено: Ср июн 22, 2011 11:48 
Не в сети

Зарегистрирован: Вс авг 10, 2008 16:00
Сообщений: 8
Есть 5 коммутаторов DGS-3650 связанных по кольцу.
В один из коммутаторов подключен DHCP-сервер, нужно перенести его на другой сервер. Перенес, работает, но адреса получают только те компьютеры которые подключены в тот же коммутатор. Подключенные в другие 4-е коммутаторы адреса не получают.
Настраивали задолго до моего прихода. Я все что можно просмотрел ничего не нашел.
Я так понимаю где-то рубит шикоровещательные пакеты с адреса.

Люди добрые, не дайте пропасть, подскажите куда смотреть??


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 11:58 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Вт янв 18, 2011 13:29
Сообщений: 8999
DHCP Relay
?


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 12:14 
Не в сети

Зарегистрирован: Вс авг 10, 2008 16:00
Сообщений: 8
Код:
DHCP/BOOTP Relay Global Settings
DHCP/BOOTP Relay State                                              Disabled
DHCP/BOOTP Relay Hops Count Limit (1-16)                      4
DHCP/BOOTP Relay Time Threshold (0-65535)              0
DHCP Relay Agent Information Option 82 State              Disabled
DHCP Relay Agent Information Option 82 Check              Disabled
DHCP Relay Agent Information Option 82 Policy               Replace


Вроде как бы выключено.


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 12:29 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
Приведите, пожалуйста, полные настройки коммутатора, в который подключен DHCP сервер и настройки соседнего коммутатора, клиенты в котором не получают IP адресов. Также укажите порты подключения между этими коммутаторами и порт, в который подключен DHCP сервер.
P.S. При вставке конфигурации используйте тег spoiler, чтобы получилось примерно так:
Скрытый текст: показать
конфигурация


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 12:59 
Не в сети

Зарегистрирован: Вс авг 10, 2008 16:00
Сообщений: 8
А как выгрузить полную конфигурацию?
Коммутаторы объединены в стек.


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 13:02 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
Посмотрите командой "sh conf cur" на мастере стека. Если это аппаратный стек, то конфигурацию достаточно только с него снять.


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 13:45 
Не в сети

Зарегистрирован: Вс авг 10, 2008 16:00
Сообщений: 8
sh conf cur не заработала
снял sh config active
Скрытый текст: показать
#-------------------------------------------------------------------------------
# DGS-3650 Gigabit Ethernet Switch
# Configuration
#
# Firmware: Build 2.50.B25
# Copyright(C) 2008 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------


# STACK

## stacking config information
## #Box Prio-
## #ID Type Exist rity
## #--- ----------- ----- -----
## # 1 DGS-3650 exist 32
## # 2 DGS-3650 exist 21
## # 3 DGS-3650 exist 22
## # 4 DGS-3650 exist 31
## # 5 DGS-3650 exist 32
## # 6 DGS-3650 no
## # 7 Not_Exist no
## # 8 Not_Exist no
## # 9 Not_Exist no
## # 10 Not_Exist no
## # 11 Not_Exist no
## # 12 Not_Exist no

# DOUBLE_VLAN

disable double_vlan

# BASIC

config serial_port auto_logout 10_minutes
enable telnet 23
enable web 80
enable clipaging

# STORM

config traffic trap none
config traffic control 1:1-1:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5
config traffic control 2:1-2:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5
config traffic control 3:1-3:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5
config traffic control 4:1-4:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5
config traffic control 5:1-5:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5
config traffic control 6:1-6:48 broadcast disable multicast disable unicast disable action drop threshold 131072 countdown 0 time_interval 5

# LOOP_DETECT


# GM

config sim candidate
enable sim
config sim dp_interval 30
config sim hold_time 100

# GM_H


# SYSLOG

disable syslog
config system_severity log information
config system_severity trap information
config log_save_timing time_interval 1

# QOS

config scheduling_mechanism strict
config scheduling 0 max_packet 1
config scheduling 1 max_packet 2
config scheduling 2 max_packet 3
config scheduling 3 max_packet 4
config scheduling 4 max_packet 5
config scheduling 5 max_packet 6
config scheduling 6 max_packet 7
config 802.1p user_priority 0 2
config 802.1p user_priority 1 0
config 802.1p user_priority 2 1
config 802.1p user_priority 3 3
config 802.1p user_priority 4 4
config 802.1p user_priority 5 5
config 802.1p user_priority 6 6
config 802.1p user_priority 7 6
enable hol_prevention
config 802.1p default_priority 1:1-1:48 0
config bandwidth_control 1:1-1:48 rx_rate no_limit tx_rate no_limit
config 802.1p default_priority 2:1-2:48 0
config bandwidth_control 2:1-2:48 rx_rate no_limit tx_rate no_limit
config 802.1p default_priority 3:1-3:48 0
config bandwidth_control 3:1-3:48 rx_rate no_limit tx_rate no_limit
config 802.1p default_priority 4:1-4:48 0
config bandwidth_control 4:1-4:48 rx_rate no_limit tx_rate no_limit
config 802.1p default_priority 5:1-5:48 0
config bandwidth_control 5:1-5:48 rx_rate no_limit tx_rate no_limit
config 802.1p default_priority 6:1-6:48 0
config bandwidth_control 6:1-6:48 rx_rate no_limit tx_rate no_limit

# MIRROR

disable mirror

# TRAF-SEGMENTATION

config traffic_segmentation 1:1-1:48 forward_list all
config traffic_segmentation 2:1-2:48 forward_list all
config traffic_segmentation 3:1-3:48 forward_list all
config traffic_segmentation 4:1-4:48 forward_list all
config traffic_segmentation 5:1-5:48 forward_list all
config traffic_segmentation 6:1-6:48 forward_list all

# SSL

disable ssl
enable ssl ciphersuite RSA_with_RC4_128_MD5
enable ssl ciphersuite RSA_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite DHE_DSS_with_3DES_EDE_CBC_SHA
enable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
config ssl cachetimeout 600

# PORT
disable jumbo_frame
config ports 1:1-1:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 1:45-1:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 1:45-1:48 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 2:1-2:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 2:45-2:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 2:45-2:48 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 3:1-3:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 3:45-3:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 3:45-3:48 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 4:1-4:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 4:45-4:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 4:45-4:48 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 5:1-5:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 5:45-5:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 5:45-5:48 medium_type fiber speed auto capability_advertised 1000_full flow_control disable learning enable state enable
config ports 6:1-6:44 speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable
config ports 6:45-6:48 medium_type copper speed auto capability_advertised 10_half 10_full 100_half 100_full 1000_full flow_control disable learning enable state enable


# PORT_LOCK

config port_security ports 1:1-1:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset
config port_security ports 2:1-2:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset
config port_security ports 3:1-3:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset
config port_security ports 4:1-4:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset
config port_security ports 5:1-5:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset
config port_security ports 6:1-6:48 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnReset

# SNMPv3

delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp group ReadGroup
delete snmp group WriteGroup
delete snmp view restricted all
delete snmp view CommunityView all
config snmp engineID 800000ab03001e585ae900
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included
create snmp group public v1 read_view CommunityView notify_view CommunityView
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3 noauth_nopriv read_view restricted notify_view restricted
create snmp group private v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp community private view CommunityView read_write
create snmp community public view CommunityView read_only
create snmp user initial initial

# MANAGEMENT

enable snmp traps
enable snmp authenticate_traps
disable snmp
enable snmp linkchange_traps
config snmp system_name SF11
disable rmon
config snmp linkchange_traps ports 1:1-1:48 enable
config snmp linkchange_traps ports 2:1-2:48 enable
config snmp linkchange_traps ports 3:1-3:48 enable
config snmp linkchange_traps ports 4:1-4:48 enable
config snmp linkchange_traps ports 5:1-5:48 enable
config snmp linkchange_traps ports 6:1-6:48 enable

# VLAN

disable pvid auto_assign
config vlan default delete 1:1-1:48,2:1-2:48,3:1-3:48,4:1-4:48,5:1-5:48,6:1-6:48
config vlan default add untagged 1:1-1:48,2:1-2:48,3:1-3:16,3:33-3:48,4:1-4:48,5:1-5:48
config vlan default advertisement enable
create vlan BUH tag 2
config vlan BUH add untagged 2:27,3:17-3:32 advertisement enable
disable qinq
enable gvrp
config gvrp 1:1-1:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1
config gvrp 2:1-2:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1
config gvrp 3:1-3:16,3:33-3:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1
config gvrp 3:17-3:32 state disable ingress_checking enable acceptable_frame admit_all pvid 2
config gvrp 4:1-4:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1
config gvrp 5:1-5:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1
config gvrp 6:1-6:48 state disable ingress_checking enable acceptable_frame admit_all pvid 1

# PROTOCOL_VLAN


# QINQ

config qinq ports 1:1-1:48 missdrop disable tpid 0x8100
config qinq ports 2:1-2:48 missdrop disable tpid 0x8100
config qinq ports 3:1-3:48 missdrop disable tpid 0x8100
config qinq ports 4:1-4:48 missdrop disable tpid 0x8100
config qinq ports 5:1-5:48 missdrop disable tpid 0x8100
config qinq ports 6:1-6:48 missdrop disable tpid 0x8100

# RSPAN

disable rspan

# 8021X

enable 802.1x
config 802.1x auth_mode port_based
config 802.1x auth_protocol radius_eap
config 802.1x capability ports 1:1-1:48 none
config 802.1x auth_parameter ports 1:1-1:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x capability ports 2:1-2:48 none
config 802.1x auth_parameter ports 2:1-2:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x capability ports 3:1-3:48 none
config 802.1x auth_parameter ports 3:1-3:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x capability ports 4:1-4:48 none
config 802.1x auth_parameter ports 4:1-4:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x capability ports 5:1-5:48 none
config 802.1x auth_parameter ports 5:1-5:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable
config 802.1x capability ports 6:1-6:48 none
config 802.1x auth_parameter ports 6:1-6:48 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable

# guestvlan


# TR


# ACL

create access_profile profile_id 10 ethernet vlan ethernet_type
create access_profile profile_id 11 ethernet vlan ethernet_type
disable cpu_interface_filtering

# LIMITED_MULTICAST_RANGE


# MULTICAST_VLAN


# FDB

config fdb aging_time 300

# ADDRBIND

config address_binding ip_mac ports 1:1-1:48,2:1-2:48,3:1-3:48,4:1-4:48,5:1-5:48,6:1-6:48 forward_dhcppkt enable
disable address_binding dhcp_snoop
disable address_binding trap_log
config address_binding dhcp_snoop max_entry ports 1:1-1:48 limit no_limit
config address_binding dhcp_snoop max_entry ports 2:1-2:48 limit no_limit
config address_binding dhcp_snoop max_entry ports 3:1-3:48 limit no_limit
config address_binding dhcp_snoop max_entry ports 4:1-4:48 limit no_limit
config address_binding dhcp_snoop max_entry ports 5:1-5:48 limit no_limit
config address_binding dhcp_snoop max_entry ports 6:1-6:48 limit no_limit

# DhcpServerScreening

config filter dhcp_server port all state disable
config filter dhcp_server illegal_server_log_suppress_duration 5min
config filter dhcp_server trap_log disable

# MAC_ADDRESS_TABLE_NOTIFICATION

disable mac_notification
config mac_notification interval 1 historysize 1
config mac_notification ports 1:1-1:48 disable
config mac_notification ports 2:1-2:48 disable
config mac_notification ports 3:1-3:48 disable
config mac_notification ports 4:1-4:48 disable
config mac_notification ports 5:1-5:48 disable
config mac_notification ports 6:1-6:48 disable

# STP

config stp version rstp
config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 3 fbpdu enable hellotime 2 lbd enable lbd_recover_timer 60
config stp priority 32768 instance_id 0
config stp mst_config_id name 00:1E:58:5A:E9:00 revision_level 0
disable stp
config stp ports 1:1-1:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 1:1-1:48 instance_id 0 internalCost auto priority 128
config stp ports 1:1-1:48 fbpdu enable
config stp ports 2:1-2:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 2:1-2:48 instance_id 0 internalCost auto priority 128
config stp ports 2:1-2:48 fbpdu enable
config stp ports 3:1-3:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 3:1-3:48 instance_id 0 internalCost auto priority 128
config stp ports 3:1-3:48 fbpdu enable
config stp ports 4:1-4:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 4:1-4:48 instance_id 0 internalCost auto priority 128
config stp ports 4:1-4:48 fbpdu enable
config stp ports 5:1-5:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 5:1-5:48 instance_id 0 internalCost auto priority 128
config stp ports 5:1-5:48 fbpdu enable
config stp ports 6:1-6:48 externalCost auto edge false p2p auto state enable lbd disable
config stp mst_ports 6:1-6:48 instance_id 0 internalCost auto priority 128
config stp ports 6:1-6:48 fbpdu enable

# BPDU_TUNNEL

config bpdu_tunnel ports all type none
disable bpdu_tunnel

# SAFEGUARD_ENGINE

config safeguard_engine state disable utilization rising 30 falling 20 trap_log disable mode fuzzy

# BANNER_PROMP

config command_prompt default
config greeting_message default

# SSH

config ssh algorithm 3DES enable
config ssh algorithm AES128 enable
config ssh algorithm AES192 enable
config ssh algorithm AES256 enable
config ssh algorithm arcfour enable
config ssh algorithm blowfish enable
config ssh algorithm cast128 enable
config ssh algorithm twofish128 enable
config ssh algorithm twofish192 enable
config ssh algorithm twofish256 enable
config ssh algorithm MD5 enable
config ssh algorithm SHA1 enable
config ssh algorithm RSA enable
config ssh algorithm DSA enable
config ssh authmode password enable
config ssh authmode publickey enable
config ssh authmode hostbased enable
config ssh server maxsession 8
config ssh server contimeout 120
config ssh server authfail 2
config ssh server rekey never
disable ssh

# SNTP

disable sntp
config time_zone operator + hour 0 min 0
config sntp primary 0.0.0.0 secondary 0.0.0.0 poll-interval 720
config dst disable

# LACP

config link_aggregation algorithm ip_source
config lacp_port 1:1-1:48 mode passive
config lacp_port 2:1-2:48 mode passive
config lacp_port 3:1-3:48 mode passive
config lacp_port 4:1-4:48 mode passive
config lacp_port 5:1-5:48 mode passive
config lacp_port 6:1-6:48 mode passive

# IP

config ipif_mac_mapping ipif System mac_offset 0
config ipif System ipaddress 192.168.0.130/24 vlan default
config ipif System proxy_arp disable local disable
config ipif_mac_mapping ipif buh mac_offset 1
create ipif buh 10.0.27.130/24 BUH state enable
config ipif buh proxy_arp disable local disable
config ipif buh ip_mtu 1500
config ipif System ip_mtu 1500
disable autoconfig

# LLDP

disable lldp
config lldp message_tx_interval 30
config lldp tx_delay 2
config lldp message_tx_hold_multiplier 4
config lldp reinit_delay 2
config lldp notification_interval 5
config lldp ports 1:1-1:48 notification disable
config lldp ports 1:1-1:48 admin_status tx_and_rx
config lldp ports 2:1-2:48 notification disable
config lldp ports 2:1-2:48 admin_status tx_and_rx
config lldp ports 3:1-3:48 notification disable
config lldp ports 3:1-3:48 admin_status tx_and_rx
config lldp ports 4:1-4:48 notification disable
config lldp ports 4:1-4:48 admin_status tx_and_rx
config lldp ports 5:1-5:48 notification disable
config lldp ports 5:1-5:48 admin_status tx_and_rx
config lldp ports 6:1-6:48 notification disable
config lldp ports 6:1-6:48 admin_status tx_and_rx

# MBA

disable mac_based_access_control
config mac_based_access_control ports 1:1-1:48,2:1-2:48,3:1-3:48,4:1-4:48,5:1-5:48,6:1-6:48 state disable
config mac_based_access_control ports 1:1-1:48,2:1-2:48,3:1-3:48,4:1-4:48,5:1-5:48,6:1-6:48 mode host_based
config mac_based_access_control method local
config mac_based_access_control password default

# MCFILTER

config multicast filtering_mode default forward_all_groups
config multicast filtering_mode BUH forward_unregistered_groups

# SNOOP

config limited_multicast_addr ports 1:1-1:48 state disable
config limited_multicast_addr ports 2:1-2:48 state disable
config limited_multicast_addr ports 3:1-3:48 state disable
config limited_multicast_addr ports 4:1-4:48 state disable
config limited_multicast_addr ports 5:1-5:48 state disable
config limited_multicast_addr ports 6:1-6:48 state disable

# MLDSNP


# ACCESS_AUTHENTICATION_CONTROL

config authen_login default method local
config authen_enable default method local_enable
config authen application console login default
config authen application console enable default
config authen application telnet login default
config authen application telnet enable default
config authen application ssh login default
config authen application ssh enable default
config authen application http login default
config authen application http enable default
config authen parameter response_timeout 0
config authen parameter attempt 3
disable authen_policy

# AAA_LOCAL_ENABLE_PASSWORD


# NDP

config ipv6 nd ns ipif System retrans_time 0
config ipv6 nd ra ipif System state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interval 600
config ipv6 nd ns ipif buh retrans_time 0
config ipv6 nd ns ipif buh retrans_time 0
config ipv6 nd ra ipif buh state disable life_time 1800 reachable_time 1200000 retrans_time 0 hop_limit 64 managed_flag disable other_config_flag disable min_rtr_adv_interval 198 max_rtr_adv_interval 600

# WAC

config wac method local
disable wac

# ARP

config arp_aging time 20
config gratuitous_arp send ipif_status_up enable
config gratuitous_arp send dup_ip_detected enable
config gratuitous_arp learning enable

# ROUTE

config route preference static 60
config route preference rip 100
config route preference ospfIntra 80
config route preference ospfInter 90
config route preference ospfExt1 110
config route preference ospfExt2 115
config ecmp algorithm ip_destination crc_low
enable ecmp ospf

# PROUTE


# IGMP

config igmp ipif System version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif System last_member_query_interval 1
config igmp ipif buh version 3 query_interval 125 max_response_time 10 robustness_variable 2 state disable
config igmp ipif buh last_member_query_interval 1

# PIMSM

disable pim
config pim cbsr hash_masklen 30
config pim cbsr bootstrap_period 60
config pim register_suppression_time 60
config pim register_probe_time 5
config pim last_hop_spt_switchover never
config pim crp holdtime 150 priority 192
config pim crp wildcard_prefix_cnt 0
config pim ipif System state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif System priority -1
config pim ipif buh state disable hello 30 jp_interval 60 mode dm dr_priority 1
config pim cbsr ipif buh priority -1

# DVMRP

disable dvmrp
config dvmrp ipif System metric 1 probe 10 neighbor_timeout 35 state disable
config dvmrp ipif buh metric 1 probe 10 neighbor_timeout 35 state disable

# IPMROUTE


# RIP

disable rip
config rip ipif System tx_mode disable state disable
config rip ipif System rx_mode disable state disable
config rip ipif buh tx_mode disable state disable
config rip ipif buh rx_mode disable state disable

# MD5


# SFLOW


# OSPF

config ospf ipif buh area 0.0.0.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif buh authentication none metric 1 state disable passive disable
config ospf ipif System area 0.0.0.0 priority 1 hello_interval 10 dead_interval 40
config ospf ipif System authentication none metric 1 state disable passive disable
config ospf router_id 0.0.0.0
disable ospf

# DNSR

disable dnsr
config dnsr primary nameserver 0.0.0.0
config dnsr secondary nameserver 0.0.0.0
disable dnsr cache
disable dnsr static

# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace
config dhcp_relay add ipif System 192.168.0.1
config dhcp_relay add ipif System 192.168.0.55

# DHCP_SERVER

create dhcp pool LAN1
config dhcp pool network_addr LAN1 192.168.1.0/24
config dhcp pool dns_server_address LAN1 192.168.0.1 0.0.0.0 0.0.0.0
config dhcp pool netbios_node_type LAN1 broadcast
config dhcp pool default_router LAN1 192.168.1.1 0.0.0.0 0.0.0.0
config dhcp pool lease LAN1 0 0 1
config dhcp pool next_server LAN1 192.168.1.1
create dhcp pool LAN2
config dhcp pool network_addr LAN2 192.168.2.0/24
config dhcp pool dns_server_address LAN2 192.168.0.1 0.0.0.0 0.0.0.0
config dhcp pool netbios_node_type LAN2 broadcast
config dhcp pool default_router LAN2 192.168.2.1 0.0.0.0 0.0.0.0
config dhcp pool lease LAN2 0 0 1
config dhcp pool next_server LAN2 192.168.2.1
config dhcp ping_packets 2
config dhcp ping_timeout 500
disable dhcp_server

# VRRP

config vrrp ipif System authtype none
config vrrp ipif buh authtype none
disable vrrp

disable vrrp ping


#-------------------------------------------------------------------
# End of configuration file for DGS-3650
#-------------------------------------------------------------------


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 13:49 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
Вы не указали, в какой коммутатор и порт подключен DHCP сервер.


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 14:07 
Не в сети

Зарегистрирован: Вс авг 10, 2008 16:00
Сообщений: 8
Прошу прощения.

Коммутатор 2
порт 46 - новый сервер адрес 192.168.0.55
порт 47 - старый сервер адрес 192.168.0.1


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Ср июн 22, 2011 15:46 
Не в сети
Сотрудник D-LINK
Сотрудник D-LINK

Зарегистрирован: Чт фев 12, 2009 14:59
Сообщений: 9482
Откуда: Ryazan
На вид все должно работать. А как проверяете? Что в логах DHCP сервера?


Вернуться наверх
 Профиль  
 
Показать сообщения за:  Сортировать по:  
Начать новую тему Ответить на тему  [ Сообщений: 10 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 57


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB