Есть DGS-3627G Boot PROM Version : Build 1.10-B09, Firmware Version : Build 2.51.B17. Не получается на оптических портах выставить 100_full.
Код:
DGS-3627G#config ports 10 medium_type fiber speed 100_full
Command: config ports 10 medium_type fiber speed 100_full
Port 10 can't configure with speed.
Fail!
При этом на DGS-3612G все проходит успешно с той же прошивкой и boot
Код:
DGS-3612G#config ports 8 medium_type fiber speed 100_full
Command: config ports 8 medium_type fiber speed 100_full
Success.
Проверялось не на одной 3627&3612 и даже на firmware Build 2.52.B45. Почему не получается выставить 100_full?