Периодически отваливается управление от dgs-1210-28xs/me, помогает только перезагрузка по питанию, сейчас пинг есть но в консоль вывалились ошибки, что может быть?
Коммутатор:
Device Type : DGS-1210-28XS/ME
System Boot Version : 1.01.033
System Firmware Version : 7.02.B036
System Hardware Version : B1
System up time : 2 days, 3 hrs, 32 min, 24 secs
Ошибки:
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
DGS-1210-28XS/ME Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 7.02.B036
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName: ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:
Вот что написал в лог когда отвалилось управление (мак адрес изменен):
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_Hw▒[Cameo_Single_IMG_board_info_by_series_init #1179]Board ID {GPIO:0x0, CPLD:0x0} init failed! Set non-support Board ID to ME Series default mode.
Model_Name: DGS-1210-Series/ME
Uncompressing Kernel Image ... OK
Loading Runtime Image ......
Starting kernel ...
[SINGLE_IMG Error]:Cm_Single_IMG_board_info_by_series_init #438 The gu2board_id 111 not in support list. please check it. 100%
MAC Address : 74-DA-00-00-00-00
***** Stacktrace *****
1) [+0xb6f98ba4]
2) [+0xb6ed134c]
3) [+0x6fc340]
4) [+0x9eaaac]
***** End of Stacktrace *****
DGS-1210-28XS/ME Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 7.02.B036
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName: ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:39
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_HwI2cRead_Byte() failed address:38
ERROR[NP]: Cameo_Hw▒[Cameo_Single_IMG_board_info_by_series_init #1179]Board ID {GPIO:0x0, CPLD:0x0} init failed! Set non-support Board ID to ME Series default mode.
Model_Name: DGS-1210-Series/ME
Uncompressing Kernel Image ... OK
Loading Runtime Image ......
Starting kernel ...
[SINGLE_IMG Error]:Cm_Single_IMG_board_info_by_series_init #438 The gu2board_id 111 not in support list. please check it. 100%
MAC Address : 74-DA-00-00-00-00
***** Stacktrace *****
1) [+0xb6f98ba4]
2) [+0xb6ed134c]
3) [+0x6fc340]
4) [+0x9eaaac]
***** End of Stacktrace *****