DGS-3200-10 Gigabit Ethernet Switch
                            Command Line Interface

                          Firmware: Build 1.50.B019
           Copyright(C) 2009 D-Link Corporation. All rights reserved.
UserName:
PassWord:

DGS-3200-10:4#sh vlan
Command: show vlan


VLAN Trunk State        : Disabled
VLAN Trunk Member Ports :


VID             : 1               VLAN Name     : default
VLAN Type       : Static          Advertisement : Enabled
Member Ports    : 1-10
Static Ports    : 1-10
Current Tagged Ports  :
Current Untagged Ports: 1-10
Static Tagged Ports   :
Static Untagged Ports : 1-10
Forbidden Ports       :

 Total Static VLAN Entries: 1
 Total GVRP VLAN Entries: 0


DGS-3200-10:4#config vlan default delete 1-4
Command: config vlan default delete 1-4

Success.

DGS-3200-10:4#create vlan 123
Command: create vlan 123
Next possible completions:
tag

DGS-3200-10:4#create vlan 123 tag 22
Command: create vlan 123 tag 22

Success.

DGS-3200-10:4#create ipif 1 123 state enable
Command: create ipif 1 123 state enable

Success.

DGS-3200-10:4#config ipif 1 ipaddress 10.12.0.1/16 state enable
Command: config ipif 1 ipaddress 10.12.0.1/16 state enable

 The IPv4 interface does not exist.

Fail!

DGS-3200-10:4#