Вот решил реализовать биндинг через snmp
Делал по
http://www.dlink.ru/technical/faq_hub_switch_100.php
Учёл OID DES-3828 - 1.3.6.1.4.1.171.11.69.1.2.7
И вот что выходит
Код:
snmpset -v2c -c private 192.168.0.1 1.3.6.1.4.1.171.11.69.1.2.7.1.1.2.1 i 2
Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: SNMPv2-SMI::enterprises.171.11.69.1.2.7.1.1.2.1
Код:
snmpwalk -v2c -c public 192.168.0.1 1.3.6.1.4.1.171.11.69.1.2.7.1.1.2
SNMPv2-SMI::enterprises.171.11.69.1.2.7.1.1.2 = No Such Object available on this agent at this OID
Хотя
Код:
DES-3800:admin#show address_binding ports
Command: show address_binding ports
ACL_mode : Disabled
Trap/Log : Disabled
Enabled ports: 1
Прошивка
Код:
DES-3800:admin#show firmware information
Command: show firmware information
ID Version Size(B) Update Time From User
-- -------- ------- ------------------- ------------------ ---------------
*1 3.00.B29 4996671 00000 days 00:00:00 Serial Port (PROM) Unknown
'*' means boot up section
(T) means firmware update through TELNET
(S) means firmware update through SNMP
(W) means firmware update through WEB
(SIM) means firmware update through Single IP Management
Free space: 5242880 bytes
Что я делаю не так?
Подскажите пожалуйста.
Вход
Регистрация
FAQ
Поиск
