Добрый день!

при загрузке д-слам загружается с ограниченной конфигурацией, дефолтный конфиг не загружается...

из ошибок при загрузке можно выделить следующее:

...................................................................
Cin- Uncompressing Dataplane
Uncompressing "DP.bin.gz" (382933->848776) ...... Done

Locking Text Area DP Text Start: 0x4818000 CP Text End : 0x4f301b0
CfgInit: System Coming up from Default Configuration

******************

Initializing DataPlane
DataPlane Initialized successfully

Cin:- Factory Default File received from NVRAM

The DSL binary file to be opened is dsl_10_330000003C00000D.bin.gz
The DSL bin size is 255984
Loading The system.....
Loading system over.....
Initializing system.....
Init of chip 0 failed 0 times, Return Value=1...
Init of chip 0 failed 1 times, Return Value=1...
Init of chip 0 failed 2 times, Return Value=1...
Init of chip 1 failed 0 times, Return Value=1...
Init of chip 1 failed 1 times, Return Value=1...
Init of chip 1 failed 2 times, Return Value=1...
Init of chip 2 failed 0 times, Return Value=1...
Init of chip 2 failed 1 times, Return Value=1...
Init of chip 2 failed 2 times, Return Value=1...
Initializing system over.....

CfgInit: Command Failure: create atm port ifname atm-0 lowif dsl-0


CIN:- Problem detected in the NVM copy of FD
Block 31 erase in progress
........Flash block 31 erase successful...

FLASH program starts at ADDR 3e0000
###############

Cin:- Changed ACTIVE copy of FD in flash to TRIED
CIN:- No other INACTIVE copy of FD found in flash
CIN:- System shall come up with MINIMUM configuration

CRITICAL ALARM : System Init Failed : Module - Cin : Cause - Init from Default failed
Block 31 erase in progress
........Flash block 31 erase successful...

............................................................................

поcле этого система автоматически перегружается с ограниченной конфигурацией.

Обратитесь в сервисный центр D-Link.