Вижу эта проблема не только у меня...
DAS-3248B. Прошивка последняя 2.47.
Лог загрузки:
Код:
Transfering Control to BootTftp binary                                       
 Flash Present In System.......                               
.............................                             
 MANUF skip tftping                   
 All the files are in Flash, No TFTP required                                             
 Mxu shall come up in normal mode                                 
 All the files have been successfully                                      
 Active copy of Ctrl Plane Bin was found in flash                                                 
 Unzipping the Control Plane....................................................                                                                                
................................................................................                                                                                
................................................................................                                                                                
................................................................................                                                                                
..  
 Transferring Control to Ctrl Plane Binary...                                             
 Free Memory available in SDRAM-A is 0x95bf8                                            
 System coming up in normal mode...                                   
 Locking Control Plane Text Start: 0x4923000 End: 0x4f80aa8                                                           
 FlashPresent = 1                 
 u8ColumbiaIdSel = 18                     
 u32FlashSize = 4194304                       
 total memory Free in SDRAM A = 613368                                      
 Allocatiing System Memory fom SDRAM-E                                      
 total memory Free in SDRAM E = 196608                                      
 total memory Free in SDRAM D = 0                                 
 total memory Free in SDRAM B = 316468                                      
 Flash scanning in progress                           
.............................                             
 CdbNvm:- Configuration Size is 1939248                                       
 CdbNvm:- NVM CFG1 size 262032
CdbNvm:- Device not Opened before Ioctl
CdbNVM:- next boot mode is 0xfe
 The uncompress location for data plane is 0x400b000
 Cin:- DataPlane present in NVRAM
 Cin- Uncompressing Dataplane
 Uncompressing "DP.bin.gz" (384665->840232) ...... Done
 Locking Text Area DP Text Start: 0x4818000 CP Text End : 0x4f80aa8
 CfgInit: System Coming up from Last Configuration
Uncompress:- UnZipLen: 113149, ZipLen: 9301
 Initializing DataPlane
 DataPlane Initialized successfully
Uncompress:- UnZipLen: 113149, ZipLen: 9301The DSL binary file to be opened is d
sl_10_330000003C00000D.bin.gz
The DSL bin size is 266376
Loading The system.....
Loading system over.....
Initializing system.....
Initializing system over.....
И все... Дальше загорается индикатор "error" и ни на какие действия кроме выключения питания не реагирует. 
И все таки как то можно это диагностировать и лечить на месте без поездок в сервис центр?