Здраствуйте,
Возникли сложности с настройкой дслама.
Порядок моих действий:
С порта свича в eth1 дслама транком подаю два влана 111 и 10.
На первый вдсл порт вешаю модем бриджом, за модемом комп с ИП из 10ого влана.
Код:
reboot config default
modify ethernet intf ifname eth-1 ip 10.0.111.11 mask 255.255.255.0 mgmtvlanid 111
create vlan static vlanname management vlanid 111 egressports 385 untaggedports none
modify vlan static vlanid 1 untaggedports none egressports none
create vlan static vlanname fake vlanid 10 egressports 385 1 untaggedports 1
modify vlan static vlanname fake floodSupport enable bcastsupport enable
modify gvrp port info portid 1 portvlanid 10 acceptframetypes all ingressfiltering true
commit
Код:
$get ethernet intf ifname eth-1
Interface : eth-1
Type : Uplink UseDhcp : False
IP Address : 10.0.111.11 Mask : 255.255.255.0
Pkt Type : ALL
Orl(mbps) : 300
Configured Duplex : auto Duplex : Full
Configured Speed : auto
Profile Name : SPPROFILE
Mgmt VLAN Index : 111
Mgmt S-VLAN Index : -
Mgmt T-VLAN Index : 0
Tagged Mgmt PDU Prio : 0
trfclassprofileid : 2
Ctl Pkts Instance Id : 0 Ctl Pkts Group Id :none
M2VMacDbId : none
Speed : 100BT
Oper Status : Up Admin Status : Up
Код:
$get atm vc intf ifname aal5-1
VC IfName : aal5-1 Low IfName : atm-1
VPI : 8 VCI : 35
Admin Status : Up Oper Status : Up
Aal5 Tx Size : 1536 Aal5 Rx Size : 1536
AAL Type : aal5 AAL5 Encap : llcmux
Channel : interleaved Last Change (sec) : 0
MgmtMode : Data Row Status : active
VC Type : pvc VC Topology : Point to Point
Max simultaneous protocol : 1
Auto Status : Disable
Auto VC Mux Forced Protocol : None
Auto Sense Trigger Type : dynamic
Auto Curr Sensed Encaps Type: none
Ctl Pkts Group Id : none
Auto Supported Protocol : pppoa eoa ipoa
пинги на 10.0.111.11 ходят, компа за адсл модемом не видно.
Что я делаю не так?