Здраствуйте, после прошивки нет вывода в ком-порт, прошивали по инструкции.
Лог прошивки:
Код:
Rebooting.......#
****************
DSLAM Bootloader
****************
Bootloader Release : R2.2n_4M Date: Nov 17 2009
Initializing IPDSLAM Memories............. Success
Press F1 to enter Interactive Mode, 'Enter' to skip .... 5 seconds left
Press 'P/p' to perform POST, 'Enter' to skip .... 5 seconds left
POST not performed..................Continuing
Press i to force upgrade image, 'Enter' to skip .... 5 seconds left
Press y to confirm the upgrade operation, 'Enter' to skip .... 5 seconds left
Primary Ethernet Interface for TFTP :- eth-0
Secondary Ethernet Interface for TFTP :- eth-1
TFTPing File TEImage.bin
###################################################
TEImage.bin has been successfully received
Starting writing TEImage.bin
Finding default mac in TEImage.bin...not found!!!
Unlock flash [################################]
Check bootloader [ upgrade ]
Check boottftp [ upgrade ]
Erase flash [**##############################]
Program flash [**##############################]
Verify flash [################################]
* Verify success, system reboot *
DoReboot
После DoReboot тишина
В сервис?