Waking up daemons
Next we need to enable the lighttpd server from the command line (see the packages tutorial for a detailed explanation):

chmod a+x /ffp/start/lighttpd.shand enable a script which disables the standard HTML server called webs (if you are running a DNS-320 / DNS-325 please skip this step and go to the following section):

chmod a+x /ffp/start/kickwebs.shThe standard “webs” server then restarts automatically within a few minutes, but moves to port 81 because the standard HTTP port (80) is already occupied by the lighttpd server.

If you are running a DNS-320 or a DNS-325, you need to enable “kickwebs_dns320.sh” for kicking the internal lighttpd (which is used for the Webinterface of the Device) from Port 80:

chmod a+x /ffp/start/kickwebs_dns320.shNote that the chmod commands only take effect on the next reboot. If you would reboot now, however, nothing changes. If you want to try, you can see test this manually using:

sh /ffp/start/kickwebs.sh start # When you run a Device other than DNS-320 / DNS-325
sh /ffp/start/kickwebs_dns320.sh start # When you run a DNS-320 / DNS-325
sh /ffp/start/lighttpd.sh startUnless you have installed the server before, you will get the error message /ffp/etc/lighttpd.conf: Required file not found or not readable. Which, by Linux standards is an unusually clear error message: a file with configuration settings for lighttpd is missing in the /ffp/etc directory (see the packages tutorial for more explanation).