Здравствуйте.
в мануале:
How to config OSPF summary route on D-Link
Код:
config ospf ipif int1 area 0.0.0.1 priority 1 hello_interval 10 dead_interval 40
config ospf ipif int1 authentication none metric 1 state[b] enable[/b] active
config ospf ipif int2 area 0.0.0.1 priority 1 hello_interval 10 dead_interval 40
config ospf ipif int2 authentication none metric 1 state [b]enable[/b] active
Как то не хочется включать ospf на абонентской сети.
Можно как то без включения сделать?, при условии что у меня настроено так:
Код:
config ipif_mac_mapping ipif 401 mac_offset 45
create ipif IPTV-401 10.20.30.13/30 401 state enable
config ipif IPTV-401 proxy_arp disable local disable
config ipif_mac_mapping ipif 403 mac_offset 34
create ipif IPTV-403 10.20.30.33/30 403 state enable
config ipif IPTV-403 proxy_arp disable local disable
create route redistribute dst ospf src local mettype 1 metric 1
config ecmp algorithm ip_destination crc_low
enable ecmp ospf
create ospf area 0.0.0.1 type normal
config ospf ipif 401 area 0.0.0.1 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 401 authentication none metric 1 state disable passive disable
config ospf ipif 403 area 0.0.0.1 priority 1 hello_interval 10 dead_interval 40
config ospf ipif 403 authentication none metric 1 state disable passive disable
create ospf aggregation 0.0.0.1 10.20.30.0/24 lsdb_type summary advertise disable
config ospf router_id 192.168.30.1
enable ospf
т.е. цель объединить /30 сети в одну /24