faq обучение настройка
Текущее время: Сб июл 21, 2018 14:47

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 8 ] 
Автор Сообщение
СообщениеДобавлено: Пт апр 20, 2018 20:26 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Модем D-Link 2640U/RA/U2A, при подключении провайдер Ростелеком, в WAN интерфейсе выдает, Ошибка при согласовании с пиром. Делал сброс на заводские настройки и заново настроил, ошибка не изменилась. Может кто знает как исправить...


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Пт апр 20, 2018 20:31 
Не в сети

Зарегистрирован: Чт июн 28, 2012 09:45
Сообщений: 5636
Скриншоты и логи в студию)

_________________
Ответы на все вопросы здесь: http://www.dlink.ru/ru/contacts/


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Пт апр 20, 2018 20:52 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Скриншот приложил....


Вложения:
Новый рисунок (1).png
Новый рисунок (1).png [ 173.33 KiB | Просмотров: 392 ]
Новый рисунок.png
Новый рисунок.png [ 218.88 KiB | Просмотров: 392 ]
Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Пт апр 20, 2018 21:41 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Jan 1 00:00:06 syslogd started: BusyBox v1.19.2
Jan 1 00:00:06 kernel: [03] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [04] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [05] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [06] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [07] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [08] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [09] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [10] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [11] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [12] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [13] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [14] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [15] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: ------------------------------------------
Jan 1 00:00:06 kernel: (_rtl865x_addNetif) create new sw_netif entry in netifTbl[idx = 1] , name=ppp0
Jan 1 00:00:06 kernel: (_rtl865x_addNetif)----------After changing ----------------------
Jan 1 00:00:06 kernel: [00] valid:1 name:br0 vid:9 is_slave:0 acl_chainlist_head:81e84880
Jan 1 00:00:06 kernel: [01] valid:1 name:ppp0 vid:8 is_slave:1 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [02] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [03] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [04] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [05] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [06] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [07] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [08] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [09] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [10] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [11] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [12] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [13] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [14] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [15] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: ------------------------------------------
Jan 1 00:00:06 kernel: Leave _rtl865x_addNetif with SUCCESS
Jan 1 00:00:06 kernel: device eth0.3 entered promiscuous mode
Jan 1 00:00:06 kernel: device eth0.4 entered promiscuous mode
Jan 1 00:00:06 kernel: device eth0.5 entered promiscuous mode
Jan 1 00:00:06 kernel: br0: port 3(eth0.5) entering learning state
Jan 1 00:00:06 kernel: br0: port 2(eth0.4) entering learning state
Jan 1 00:00:06 kernel: br0: port 1(eth0.3) entering learning state
Jan 1 00:00:06 get_device_mac[41]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:06 kernel: device eth0.2 entered promiscuous mode
Jan 1 00:00:06 kernel: br1: port 1(eth0.2) entering learning state
Jan 1 00:00:06 get_device_mac[41]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:07 kernel: gSocObcIntBit=2463330000
Jan 1 00:00:07 kernel: remove REG32(0xb8000114)=0x1400
Jan 1 00:00:07 kernel: InitAdslMode....
Jan 1 00:00:07 kernel: InitAdsl
Jan 1 00:00:07 syslog: RFC 1483/2684 bridge daemon started
Jan 1 00:00:07 kernel: inter_system.sachemIntSource=7
Jan 1 00:00:07 kernel: gSocId=0x63330000
Jan 1 00:00:07 kernel: 867x ver = Q, (0412 ver)=0x63330000, (ver)=0x3200
Jan 1 00:00:07 kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:07 kernel: -------> Set MIB from /etc/Wireless/RTL8192CD.dat
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_enable=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_pure=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_priority=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_encrypt=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_num=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "manual_edca=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_aifsn=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_cwmax=6" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_aifsn=7" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_cwmax=10" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_aifsn=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_cwmin=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_cwmax=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_txoplimit=3008" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_aifsn=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_cwmin=2" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_cwmax=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_txoplimit=1504" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_beq_aifsn=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_beq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_beq_cwmax=10" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_beq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_beq_acm=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_bkq_aifsn=7" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_bkq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_bkq_cwmax=10" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_bkq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_bkq_acm=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_viq_aifsn=2" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_viq_cwmin=3" failed
Jan 1 00:00:08 kernel: br0: port 4(wlan0) entering learning state
Jan 1 00:00:08 kernel: Time_elapse(1) = 990
Jan 1 00:00:09 kernel: Time_elapse@sendtimer = 990
Jan 1 00:00:11 kernel: Fast path for http trafic Enable
Jan 1 00:00:12 dnsmasq[182]: warning: interface br1 does not currently exist
Jan 1 00:00:12 kernel: groupScore, ch 1,5: 2295
Jan 1 00:00:12 kernel: groupScore, ch 2,6: 1998
Jan 1 00:00:12 kernel: groupScore, ch 3,7: 873
Jan 1 00:00:12 kernel: groupScore, ch 4,8: 1394
Jan 1 00:00:12 kernel: groupScore, ch 5,9: 1048
Jan 1 00:00:12 kernel: groupScore, ch 6,10: 819
Jan 1 00:00:12 kernel: groupScore, ch 7,11: 392
Jan 1 00:00:12 kernel: groupScore, ch 8,12: 89
Jan 1 00:00:12 kernel: groupScore, ch 9,13: 1458
Jan 1 00:00:13 anweb[205]: Starting...
Jan 1 00:00:15 link_watcher_start[41]: link watcher start with status -1
Jan 1 00:00:15 anweb[205]: anweb sighandler signal = 126
Jan 1 00:00:15 anweb[205]: HTTP main server started on 80,443s port (ports).
Jan 1 00:00:15 anweb[205]: HTTP intercept server started on 81,4445s port (ports).
Jan 1 00:00:15 dms_link_watch_lock[235]: Semaphore creation error 17 (File exists)
Jan 1 00:00:15 dms_link_watch_lock[237]: Semaphore creation error 17 (File exists)
Jan 1 00:00:15 dms_link_watch_lock[238]: Semaphore creation error 17 (File exists)
Jan 1 00:00:16 kernel: br0: port 3(eth0.5) entering forwarding state
Jan 1 00:00:16 kernel: br0: port 2(eth0.4) entering forwarding state
Jan 1 00:00:16 kernel: br0: port 1(eth0.3) entering forwarding state
Jan 1 00:00:16 kernel: br1: port 1(eth0.2) entering forwarding state
Jan 1 00:00:17 get_device_mac[292]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:18 kernel: br0: port 4(wlan0) entering forwarding state
Jan 1 00:00:18 kernel: SachemAccess::reset()
Jan 1 00:00:18 kernel: 8676S ctrlin readback: afe version = 0x 3430
Jan 1 00:00:18 kernel: AFE_ver=0x686
Jan 1 00:00:18 kernel: 8676(>M) + 6256/6257 decide use DDR mode
Jan 1 00:00:18 kernel: xtm_elapse() = 11060
Jan 1 00:00:18 kernel: LD Power down to avoid huge current
Jan 1 00:00:18 kernel: TxIdxTxIdx = 0
Jan 1 00:00:18 kernel: OKnum=512
Jan 1 00:00:18 kernel: DDR phase 0xd OK
Jan 1 00:00:18 kernel: OKnum=512
Jan 1 00:00:18 kernel: DDR phase 0x1 OK
Jan 1 00:00:18 kernel: OKnum=19
Jan 1 00:00:23 kernel: Time_elapse(2) = 16260
Jan 1 00:00:23 kernel: SachemAccess::reset()
Jan 1 00:00:42 kernel: ATM OAM F5 initialized.
Jan 1 00:00:42 kernel: ATM OAM F4 initialized.
Jan 1 00:00:42 kernel: Enable 8671G 1 function
Jan 1 00:00:42 kernel: Enable 8671 0 function
Jan 1 00:00:42 kernel: Enable 8672 function
Jan 1 00:00:42 kernel: applying workaround...done
Jan 1 00:00:42 kernel: Upstream Rate : 637 Kbps (line rate : 804)
Jan 1 00:00:42 kernel: Downstream Rate : 16383 Kbps (line rate : 18816)
Jan 1 00:00:51 kernel: sar_ioctl: called. cmd=0x8a05, arg=7fbfc50c
Jan 1 00:00:51 kernel: PVC Number = 1. Set Desc number per VC = 126
Jan 1 00:00:51 syslog: Interface "vc0" created sucessfully
Jan 1 00:00:51 syslog: Communicating over ATM 0.0.34, encapsulation: 1
Jan 1 00:00:51 kernel: fixme atm_find_ci in sar_open!
Jan 1 00:00:51 kernel: (itf 0): open 0.34
Jan 1 00:00:51 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:51 kernel: ATM OAM F5 initialized.
Jan 1 00:00:51 kernel: ATM OAM F4 initialized.
Jan 1 00:00:51 kernel: Enable 8671G 1 function
Jan 1 00:00:51 kernel: Enable 8671 0 function
Jan 1 00:00:51 kernel: Enable 8672 function
Jan 1 00:00:51 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:51 kernel: net_device: 2179881984
Jan 1 00:00:51 kernel: applying workaround...done
Jan 1 00:00:51 syslog: Interface configured
Jan 1 00:00:51 get_device_mac[334]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:51 kernel: sar_ioctl: called. cmd=0x8a08, arg=817c7b88
Jan 1 00:00:51 kernel: sar_ioctl: called. cmd=0x8a0f, arg=00415008
Jan 1 00:00:51 get_device_mac[334]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:51 kernel: sar_ioctl: called. cmd=0x8a10, arg=(null)
Jan 1 00:00:52 kernel: br1: port 1(eth0.2) entering disabled state
Jan 1 00:00:52 kernel: device vc0 entered promiscuous mode
Jan 1 00:00:52 kernel: br1: port 2(vc0) entering learning state
Jan 1 00:00:52 kernel: br1: port 1(eth0.2) entering learning state
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a05, arg=7fb4972c
Jan 1 00:00:52 kernel: PVC Number = 2. Set Desc number per VC = 126
Jan 1 00:00:52 syslog: Interface "vc1" created sucessfully
Jan 1 00:00:52 syslog: Communicating over ATM 0.0.35, encapsulation: 1
Jan 1 00:00:52 kernel: fixme atm_find_ci in sar_open!
Jan 1 00:00:52 kernel: (itf 0): open 0.35
Jan 1 00:00:52 kernel: create: ch1 (0/35) 6000,0
Jan 1 00:00:52 kernel: ATM OAM F5 initialized.
Jan 1 00:00:52 kernel: ATM OAM F4 initialized.
Jan 1 00:00:52 kernel: Enable 8671G 1 function
Jan 1 00:00:52 kernel: Enable 8671 0 function
Jan 1 00:00:52 kernel: Enable 8672 function
Jan 1 00:00:52 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:52 kernel: net_device: 2179881984
Jan 1 00:00:52 kernel: create: ch1 (0/35) 6000,0
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a0f, arg=00415008
Jan 1 00:00:52 get_device_mac[334]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a10, arg=(null)
Jan 1 00:00:52 syslog: Interface configured
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a08, arg=817c7b88
Jan 1 00:00:53 stop_process_t[334]: not found pid process 'igmpx'
Jan 1 00:00:56 pppd[416]: Plugin /usr/lib/pppd/rp-pppoe.so loaded.
Jan 1 00:00:56 pppd[417]: pppd 2.4.4 started by admin, uid 0
Jan 1 00:00:59 get_device_mac[438]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:01:02 kernel: br1: port 2(vc0) entering forwarding state
Jan 1 00:01:02 kernel: br1: port 1(eth0.2) entering forwarding state
Jan 1 00:01:08 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:13 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:18 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:18 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:01:18 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:01:18 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:01:23 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:01:29 get_device_mac[474]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:01:30 dms_link_watch_lock[479]: Semaphore creation error 17 (File exists)
Jan 1 00:01:30 dms_link_watch_lock[478]: Semaphore creation error 17 (File exists)
Jan 1 00:01:35 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:40 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:46 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:46 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:01:46 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:01:46 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:01:51 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:01:58 get_device_mac[516]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:01:59 adsl_status[527]: 1950
Jan 1 00:02:01 get_device_mac[553]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:02:03 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:08 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:13 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:13 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:02:13 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:02:13 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:02:18 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:02:31 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:32 get_device_mac[769]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:02:36 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:36 adsl_status[793]: 1950
Jan 1 00:02:36 adsl_status[796]: 1950
Jan 1 00:02:40 adsl_status[809]: 1950
Jan 1 00:02:41 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:02:41 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:02:41 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:02:41 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:02:44 adsl_status[828]: 1950
Jan 1 00:02:46 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:02:48 adsl_status[845]: 1950
Jan 1 00:02:58 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:03 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:08 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:08 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:03:08 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:03:08 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:03:13 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:03:25 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:30 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:35 pppd[417]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:03:35 pppd[417]: Timeout waiting for PADS packets
Jan 1 00:03:35 pppd[417]: Unable to complete PPPoE Discovery
Jan 1 00:03:35 pppd[417]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:03:40 pppd[417]: Couldn't get PPP statistics: No such device
Jan 1 00:00:06 syslogd started: BusyBox v1.19.2
Jan 1 00:00:06 kernel: [04] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [05] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [06] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [07] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [08] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [09] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [10] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [11] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [12] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [13] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [13] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [14] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: [15] valid:0 name: vid:0 is_slave:0 acl_chainlist_head:(null)
Jan 1 00:00:06 kernel: ------------------------------------------
Jan 1 00:00:06 kernel: Leave _rtl865x_addNetif with SUCCESS
Jan 1 00:00:06 kernel: device eth0.3 entered promiscuous mode
Jan 1 00:00:06 kernel: device eth0.4 entered promiscuous mode
Jan 1 00:00:06 kernel: device eth0.5 entered promiscuous mode
Jan 1 00:00:06 kernel: br0: port 3(eth0.5) entering learning state
Jan 1 00:00:06 kernel: br0: port 2(eth0.4) entering learning state
Jan 1 00:00:06 kernel: br0: port 1(eth0.3) entering learning state
Jan 1 00:00:06 get_device_mac[41]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:06 kernel: device eth0.2 entered promiscuous mode
Jan 1 00:00:06 kernel: br1: port 1(eth0.2) entering learning state
Jan 1 00:00:06 get_device_mac[41]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:07 kernel: gSocObcIntBit=2463330000
Jan 1 00:00:07 kernel: remove REG32(0xb8000114)=0x1400
Jan 1 00:00:07 kernel: InitAdslMode....
Jan 1 00:00:07 kernel: InitAdsl
Jan 1 00:00:07 syslog: RFC 1483/2684 bridge daemon started
Jan 1 00:00:07 kernel: inter_system.sachemIntSource=7
Jan 1 00:00:07 kernel: gSocId=0x63330000
Jan 1 00:00:07 kernel: 867x ver = Q, (0412 ver)=0x63330000, (ver)=0x3200
Jan 1 00:00:07 kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:07 kernel: -------> Set MIB from /etc/Wireless/RTL8192CD.dat
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_enable=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_pure=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_priority=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_encrypt=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "wds_num=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "manual_edca=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_aifsn=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_cwmax=6" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_beq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_aifsn=7" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_cwmin=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_cwmax=10" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_bkq_txoplimit=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_aifsn=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_cwmin=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_cwmax=4" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_viq_txoplimit=3008" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_aifsn=1" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_cwmin=2" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_cwmax=3" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "ap_voq_txoplimit=1504" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "sta_voq_acm=0" failed
Jan 1 00:00:08 kernel: CFGFILE set_mib "drop_txmcast=0" failed
Jan 1 00:00:08 kernel: <------- Set MIB from /etc/Wireless/RTL8192CD.dat Success
Jan 1 00:00:08 kernel: 88E 25M, 0x2c[0:3]=0x1
Jan 1 00:00:08 kernel: [PHY_ConfigBBWithParaFile][PHY_REG_PG_88E]
Jan 1 00:00:08 kernel: Switch to channel 7 before doing 88E IQK
Jan 1 00:00:08 kernel: Time_elapse(1) = 990
Jan 1 00:00:08 kernel: Time_elapse@sendtimer = 990
Jan 1 00:00:08 kernel: br0: port 4(wlan0) entering learning state
Jan 1 00:00:11 kernel: Fast path for http trafic Enable
Jan 1 00:00:12 dnsmasq[182]: warning: interface br1 does not currently exist
Jan 1 00:00:12 kernel: groupScore, ch 1,5: 3304
Jan 1 00:00:12 kernel: groupScore, ch 2,6: 3137
Jan 1 00:00:12 kernel: groupScore, ch 3,7: 1833
Jan 1 00:00:12 kernel: groupScore, ch 4,8: 1944
Jan 1 00:00:12 kernel: groupScore, ch 5,9: 1524
Jan 1 00:00:12 kernel: groupScore, ch 6,10: 1374
Jan 1 00:00:12 kernel: groupScore, ch 7,11: 1138
Jan 1 00:00:12 kernel: groupScore, ch 8,12: 0
Jan 1 00:00:12 kernel: groupScore, ch 9,13: 980
Jan 1 00:00:13 anweb[205]: Starting...
Jan 1 00:00:15 link_watcher_start[41]: link watcher start with status -1
Jan 1 00:00:15 anweb[205]: anweb sighandler signal = 126
Jan 1 00:00:15 anweb[205]: HTTP main server started on 80,443s port (ports).
Jan 1 00:00:15 anweb[205]: HTTP intercept server started on 81,4445s port (ports).
Jan 1 00:00:15 dms_link_watch_lock[235]: Semaphore creation error 17 (File exists)
Jan 1 00:00:15 dms_link_watch_lock[237]: Semaphore creation error 17 (File exists)
Jan 1 00:00:15 dms_link_watch_lock[238]: Semaphore creation error 17 (File exists)
Jan 1 00:00:16 kernel: br0: port 3(eth0.5) entering forwarding state
Jan 1 00:00:16 kernel: br0: port 2(eth0.4) entering forwarding state
Jan 1 00:00:16 kernel: br0: port 1(eth0.3) entering forwarding state
Jan 1 00:00:16 kernel: br1: port 1(eth0.2) entering forwarding state
Jan 1 00:00:17 get_device_mac[293]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:18 kernel: SachemAccess::reset()
Jan 1 00:00:18 kernel: br0: port 4(wlan0) entering forwarding state
Jan 1 00:00:18 kernel: 8676S ctrlin readback: afe version = 0x 3430
Jan 1 00:00:18 kernel: AFE_ver=0x686
Jan 1 00:00:18 kernel: 8676(>M) + 6256/6257 decide use DDR mode
Jan 1 00:00:18 kernel: xtm_elapse() = 11060
Jan 1 00:00:18 kernel: LD Power down to avoid huge current
Jan 1 00:00:18 kernel: TxIdxTxIdx = 0
Jan 1 00:00:18 kernel: OKnum=512
Jan 1 00:00:18 kernel: DDR phase 0xd OK
Jan 1 00:00:18 kernel: OKnum=512
Jan 1 00:00:18 kernel: DDR phase 0x1 OK
Jan 1 00:00:18 kernel: OKnum=19
Jan 1 00:00:23 kernel: Time_elapse(2) = 16260
Jan 1 00:00:23 kernel: SachemAccess::reset()
Jan 1 00:00:42 kernel: ATM OAM F5 initialized.
Jan 1 00:00:42 kernel: ATM OAM F4 initialized.
Jan 1 00:00:42 kernel: Enable 8671G 1 function
Jan 1 00:00:42 kernel: Enable 8671 0 function
Jan 1 00:00:42 kernel: Enable 8672 function
Jan 1 00:00:42 kernel: applying workaround...done
Jan 1 00:00:42 kernel: Upstream Rate : 637 Kbps (line rate : 804)
Jan 1 00:00:42 kernel: Downstream Rate : 16383 Kbps (line rate : 18816)
Jan 1 00:00:50 get_device_mac[344]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:51 kernel: sar_ioctl: called. cmd=0x8a05, arg=7fa742dc
Jan 1 00:00:51 kernel: PVC Number = 1. Set Desc number per VC = 126
Jan 1 00:00:51 syslog: Interface "vc0" created sucessfully
Jan 1 00:00:51 syslog: Communicating over ATM 0.0.34, encapsulation: 1
Jan 1 00:00:51 kernel: fixme atm_find_ci in sar_open!
Jan 1 00:00:51 kernel: (itf 0): open 0.34
Jan 1 00:00:51 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:51 kernel: ATM OAM F5 initialized.
Jan 1 00:00:51 kernel: ATM OAM F4 initialized.
Jan 1 00:00:51 kernel: Enable 8671G 1 function
Jan 1 00:00:51 kernel: Enable 8671 0 function
Jan 1 00:00:51 kernel: Enable 8672 function
Jan 1 00:00:51 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:51 kernel: net_device: 2179881984
Jan 1 00:00:51 kernel: applying workaround...done
Jan 1 00:00:52 syslog: Interface configured
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a08, arg=817fbb88
Jan 1 00:00:52 get_device_mac[367]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a0f, arg=00415008
Jan 1 00:00:52 kernel: sar_ioctl: called. cmd=0x8a10, arg=(null)
Jan 1 00:00:52 get_device_mac[367]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:53 kernel: br1: port 1(eth0.2) entering disabled state
Jan 1 00:00:53 kernel: device vc0 entered promiscuous mode
Jan 1 00:00:53 kernel: br1: port 2(vc0) entering learning state
Jan 1 00:00:53 kernel: br1: port 1(eth0.2) entering learning state
Jan 1 00:00:53 kernel: sar_ioctl: called. cmd=0x8a05, arg=7fae3f8c
Jan 1 00:00:53 kernel: PVC Number = 2. Set Desc number per VC = 126
Jan 1 00:00:53 syslog: Interface "vc1" created sucessfully
Jan 1 00:00:53 syslog: Communicating over ATM 0.0.35, encapsulation: 1
Jan 1 00:00:53 kernel: fixme atm_find_ci in sar_open!
Jan 1 00:00:53 kernel: (itf 0): open 0.35
Jan 1 00:00:53 kernel: create: ch1 (0/35) 6000,0
Jan 1 00:00:53 kernel: ATM OAM F5 initialized.
Jan 1 00:00:53 kernel: ATM OAM F4 initialized.
Jan 1 00:00:53 kernel: Enable 8671G 1 function
Jan 1 00:00:53 kernel: Enable 8671 0 function
Jan 1 00:00:53 kernel: Enable 8672 function
Jan 1 00:00:53 kernel: create: ch0 (0/34) 6000,0
Jan 1 00:00:53 kernel: net_device: 2179881984
Jan 1 00:00:53 kernel: create: ch1 (0/35) 6000,0
Jan 1 00:00:54 kernel: sar_ioctl: called. cmd=0x8a08, arg=817fbb88
Jan 1 00:00:54 syslog: Interface configured
Jan 1 00:00:54 kernel: sar_ioctl: called. cmd=0x8a0f, arg=00415008
Jan 1 00:00:54 kernel: sar_ioctl: called. cmd=0x8a10, arg=(null)
Jan 1 00:00:54 get_device_mac[367]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:00:55 stop_process_t[367]: not found pid process 'igmpx'
Jan 1 00:00:59 pppd[449]: Plugin /usr/lib/pppd/rp-pppoe.so loaded.
Jan 1 00:00:59 pppd[452]: pppd 2.4.4 started by admin, uid 0
Jan 1 00:01:02 get_device_mac[478]: Can't get valid MAC from flash! Use default MAC!
Jan 1 00:01:02 adsl_status[502]: 1950
Jan 1 00:01:03 kernel: br1: port 2(vc0) entering forwarding state
Jan 1 00:01:03 kernel: br1: port 1(eth0.2) entering forwarding state
Jan 1 00:01:11 pppd[452]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:16 pppd[452]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:21 pppd[452]: Used ACName = "BLGD-BRAS2" in ppp(0)
Jan 1 00:01:21 pppd[452]: Timeout waiting for PADS packets
Jan 1 00:01:21 pppd[452]: Unable to complete PPPoE Discovery
Jan 1 00:01:21 pppd[452]: lcp_close: unit:0, reason: "" (status: 0, state: 1, was_ip_down: 0)
Jan 1 00:01:26 pppd[452]: Couldn't get PPP statistics: No such device
Jan 1 00:01:33 get_device_mac[631]: Can't get valid MAC from flash! Use default MAC!


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Пт апр 20, 2018 21:42 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Наверно слетел MAC адрес...


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Сб апр 21, 2018 14:20 
Не в сети

Зарегистрирован: Чт июн 28, 2012 09:45
Сообщений: 5636
Olegg31russ писал(а):
Наверно слетел MAC адрес...

Откуда такой вывод? Покажите настройки pppoe. По-моему, он просто не находит сервер: "Couldn't get PPP statistics: No such device"

_________________
Ответы на все вопросы здесь: http://www.dlink.ru/ru/contacts/


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Сб апр 21, 2018 23:13 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Настройки PPOE правильные, настраивал при помощи мастера и в ручную эфект одинаковый, сейчас стоит TP-Link с моими паролями работает без проблем...


Вернуться наверх
 Профиль  
 
СообщениеДобавлено: Сб апр 21, 2018 23:20 
Не в сети

Зарегистрирован: Пт апр 20, 2018 20:11
Сообщений: 6
Завтра попробую настроить его в режим бридж и посмотрим какую ошибку выдаст компьютер...


Вернуться наверх
 Профиль  
 
Показать сообщения за:  Сортировать по:  
Начать новую тему Ответить на тему  [ Сообщений: 8 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на форуме

Сейчас этот форум просматривают: Google [Bot] и гости: 11


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB