Здравствуйте. Пытаюсь восстановить роутер. Все бы хорошо, но во время загрузки роутер не дает возможность выбрать пункт 2 меню, сразу выбирая автоматически третий пункт уходя в загрузку нерабочий прошивки и все. Как быть в этой ситуации? Спасибо. Логи прикладываю.

U-Boot 1.1.3 (Feb 9 2010 - 10:44:20)

Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fb0000
flash_protect ON: from 0xBF000000 to 0xBF01D3F3
flash_protect ON: from 0xBF030000 to 0xBF030FFF
*** Warning - bad CRC, using default environment

============================================
Ralink UBoot Version: 3.3
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM component: 128 Mbits SDR
DRAM bus: 32 bit
Total memory: 32 MBytes
Flash component: NOR Flash
Date:Feb 9 2010 Time:10:44:20
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

##### The CPU freq = 384 MHZ ####

SDRAM bus set to 32 bit
SDRAM size =32 Mbytes

Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.


You choosed 3

0

3: System Boot system code via Flash.
## Booting image at bf050000 ...
Image Name: DIR_620DF1A
Created: 2014-12-19 10:54:15 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1211267 Bytes = 1.2 MB
Load Address: 80000000
Entry Point: 8000c2f0
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000c2f0) ...
## Giving linux memsize in MB, 32

Starting kernel ...

ўҐ”Љ<0>`DьtXЭђ®XJґ`ЦC Ѓ P’Ё R
E вA˜BЊFPJT iA¤@vЉўКIKB`Рihр„^†Ђ C"FЂ¶7+"–*‚ђ%-)ЌиҐЦPЧ­4UШ‚"Ђ’"¤„]@®<0>J‚" Љb"СҐpЁ)$:hбТуТ№X-dФ6<0>ђ@‚"Bђb"R©
·[Ўё˜Jx©QulЂ5Z
"1ZфMЦBw©RЖЯФKЮиw©""
 …ihµA“4%‰P%hE«hЎZZ“YЄ ћХ…+ҐР©’0HђЁ єWuФE4Є­¬<0>µ­UPUС)ЁФЃЌP@­­°[Aµ¤u ­•’‘Y(Ъ Ќ•""Іо*¤СE¦H-E6ґЈ"b¬ZAЩPЈhCоB2Љwѓ5ЎiЖZЄZшJш