Добрый день!
На свитче DGS-1210-28P/ME включил LLDP на порту:
Код:
DGS-1210-28P/ME:5# show lldp ports 5
Command: show lldp ports 5
Port ID : 5
-----------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Enable
Advertised TLVs Option :
Port Description Disable
System Name Disable
System Description Disable
System Capabilities Enable
Enabled Management Address
(NONE)
Port VLAN ID Enable
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status Disable
Power Via MDI Disable
Link Aggregation Disable
Maximum Frame Size Disable
... но не могу включить 802.1 LLDP Extensions:
Код:
DGS-1210-28P/ME:5# config lldp ports 5 dot1_tlv_protocol_vid vlanid 808 enable
Command: config lldp ports 5 dot1_tlv_protocol_vid vlanid 808 enable
Failure!
Через web-интерфейс пишет ошибку "Invalid VLAN range specified".
VLAN 808 на порт 5 подан тегированным. Что не так?
Спасибо!