Ранее применял такую конструкцию для одиночных vlan.
Код:
create egress_access_profile profile_id 1 profile_name vlan_rate_limit ethernet vlan 0xFFF
config egress_access_profile profile_id 1 add access_id 1 ethernet vlan 510 port 20 permit
config egress_flow_meter profile_id 1 access_id 1 rate 100000 rate_exceed drop_packet
create access_profile profile_id 1 profile_name vlan_rate_limit ethernet vlan 0xFFF
config access_profile profile_id 1 add access_id 1 ethernet vlan 510 port 20 permit
config flow_meter profile_id 1 access_id 1 rate 100000 rate_exceed drop_packet
В моём случае нужно группу vlan-ов загнать в некий общий канал и ограничить его по полосе,
flow_meter как я понял может ссылаться только на один access_id но двоичной маской нужные мне вланы не выделить,
что можно сделать в такой ситуации?