Патаюсь настроить работы option_82 на DES-1210-28/ME B2, но на dhcp server никаких запросов так и не приходит, в чем дело, понять не могу.

Конфиг: 25 порт теггерированный с несколькими vlan (2 и 3), работаю в 3 vlan, подключаю для теста ноутбук на 1 порт.

show firmware information
Command: show firmware information

Version : 6.10.B011
Size : 12162464 Bytes
Updated Time : 01/01/2016 19:36:37

=================================================

VID : 2 VLAN NAME :
VLAN Type : Static
VLAN Advertisement : Disabled
Member Ports : 25
Tagged Ports : 25
Untagged Ports :
Forbidden Ports :

VID : 3 VLAN NAME :
VLAN Type : Static
VLAN Advertisement : Disabled
Member Ports : 1,25
Tagged Ports : 25
Untagged Ports : 1
Forbidden Ports :

==================================================

show dhcp_local_relay
Command: show dhcp_local_relay

DHCP/BOOTP Local Relay Status : Enabled
DHCP/BOOTP Local Relay PortList : 1-28
DHCP/BOOTP Local Relay VID List : 3

===================================================

show dhcp_relay
Command: show dhcp_relay


DHCP/BOOTP Relay Status : Disabled
DHCP/BOOTP Relay Enable Portlist: None
DHCP/BOOTP Relay Enable VID List: 1
DHCP/BOOTP Hops Count Limit : 5
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State : Disabled
DHCP Relay Agent Information Option 82 Check : Disabled
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 ID
DHCP Relay Agent Information Option 82 Circuit ID Type : Default
DHCP Relay Agent Information Option 82 Remote ID Type : Default

Interface Server 1 Server 2 Server 3 Server 4
--------- --------------- --------------- --------------- ---------------

======================================================

show filter dhcp_server
Command: show filter dhcp_server

Enabled ports : 1-24,26-28
Enabled vlan :
Illegal Server Log Suppress Duration : 5 Minutes
Log State: Enable